UZR0G101MCL1GB

ALUMINUM ELECTROLYTIC CAPACITORS UZR 3.95mmL MAX. Chip Type UZS Chip type with 3.95mmLMAX height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. Smaller UZR Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Rated voltage (V) 4 6.3 10 16 25 35 50 0.50 0.30 0.24 0.19 0.16 0.14 0.14 Rated voltage (V) 4 6.3 10 16 25 35 50 Impedance ratio Z–25°C / Z+20°C ZT / Z20 (MAX.) Z–40°C / Z+20°C 7 4 3 2 2 2 2 15 8 8 4 4 3 3 Tangent of loss angle (tan δ) Stability at Low Temperature tan δ ( MAX.) Capacitance change tan δ Leakage current 120Hz 20°C 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Marking Black print on the case top. Chip Type Capacitance 3.90 +0.05 –0.2 1 0.5 to 0.8 Negative Voltage Within ±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value 2 3 4 5 6 7 8 9 10 11 12 13 14 U Z R 1 C 1 0 0 MC L 1 GB A±0.3 E A±0.3 B±0.2 φD±0.5 A2 10C ZR C±0.2 0.3 MAX. 0.5 MAX. Plastic platform Series Lot No. Capacitance change tan δ Leakage current Type numbering system (Example : 16V 10µF) Positive Voltage (C : 16V) Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Taping code φD A B C E 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 2.4 6.6 6.6 2.2 Configuration Capacitance tolerance (±20%) Rated capacitance (10µF) Rated voltage (16V) Series name V 4 6.3 10 16 25 35 50 Code g j A C E V H Type Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UZR Dimensions Rated Voltage （V） （code） 4 （0G） 6.3 （0J） 10 （1A） 16 （1C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 33 4× 3.9 0.50 50 （1H） ） 3 Part Number 28 UZR0G330MCL1GB 47 4×3.9 0.50 3 33 UZR0G470MCL1GB 5×3.9 0.50 4 56 UZR0G101MCL1GB 220 6.3× 3.9 0.50 8.8 96 UZR0G221MCL1GB 22 4× 3.9 0.30 3 28 UZR0J220MCL1GB 33 5× 3.9 0.30 3 37 UZR0J330MCL1GB 47 5× 3.9 0.30 3 45 UZR0J470MCL1GB 100 6.3× 3.9 0.30 6.3 70 UZR0J101MCL1GB 22 5× 3.9 0.24 3 33 UZR1A220MCL1GB 33 5× 3.9 0.24 3.3 41 UZR1A330MCL1GB 47 6.3× 3.9 0.24 4.7 52 UZR1A470MCL1GB 10 4×3.9 0.19 3 23 UZR1C100MCL1GB 22 5×3.9 0.19 3.52 37 UZR1C220MCL1GB 33 6.3× 3.9 0.19 5.28 49 UZR1C330MCL1GB 47 6.3× 3.9 0.19 7.52 58 UZR1C470MCL1GB 4× 3.9 0.16 3 16 UZR1E4R7MCL1GB 10 5× 3.9 0.16 3 27 UZR1E100MCL1GB 22 6.3× 3.9 0.16 5.5 42 UZR1E220MCL1GB 33 6.3×3.9 0.16 8.25 52 UZR1E330MCL1GB 4.7 35 （1V） （ Rated Ripple （mArms） （85℃/120Hz） 100 4.7 25 （1E） Leakage Current （µA） at 20℃ after 2 minutes 4× 3.9 0.14 3 18 UZR1V4R7MCL1GB 10 5× 3.9 0.14 3.5 29 UZR1V100MCL1GB 22 6.3× 3.9 0.14 7.7 46 UZR1V220MCL1GB 1 4× 3.9 0.14 3 2.2 4×3.9 0.14 3 8.4 13 UZR1H010MCL1GB UZR1H2R2MCL1GB 3.3 4× 3.9 0.14 3 17 UZR1H3R3MCL1GB 4.7 5× 3.9 0.14 3 20 UZR1H4R7MCL1GB 6.3× 3.9 0.14 5 33 UZR1H100MCL1GB 10 For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K