NJM1496V

NJM1496 DOUBLE BALANCED MODULATION / DEMODULATOR ■ GENERAL DESCRIPTION The NJM1496 is a double balanced modulator-demodulator which produces an output voltage proportional to hte product of an input (signal) voltage and a switching (carrier) signal. Typical applications include suppressed carrier modulation, amplitude modulation, synchronous detection, FM or PM detection, broadband frequency doubling and chopping. ■ FEATURES ● Excellent carrier suppression 65dB typical at 0.5MHz 50dB typical at 10MHz ● Adjustable gain and signal handling ● Fully balanced inputs and outputs ● High Common Mode Rejection 85dB Typ. ● Package Outline DIP14, DMP14, SSOP14 ● Bipolar Technology ■ APPLICATION ● Balanced Modulation ● Synchronous Detection ● FM Detection ● Phase Detection ● Sampling ■ PIN CONFIGURATION ■ PACKAGE OUTLINE NJM1496D NJM1496M NJM1496V NJM1496D NJM1496M NJM1496V ■ EQUIVALENT CIRCUIT Ver.2003-12-09 -1- NJM1496 ■ ABSOLUTE MAXIMUM RATINGS PARAMETER Applied Voltage Carrier Input Voltage Signal Input Voltage Input Signal Bias Current (I5) Power Dissipation RATINGS 30 (Applied Pins 6-8, 12-8, 6-10, 12-10, 10-1, 8-1, 10-4, 8-4, 2-5, 3-5) ±5 (Applied Pins 8-10) ±(5+I5, Re) (Applied Pins 1-4) 5 10 (DIP14) 570 (DMP14) 300 (SSOP14) 300 -20 to +75 -40 to +125 (Ta=25°C) UNIT V V V V mA mW mW mW °C °C Operating Temperature Range Storage Temperature Range ■ ELECTRICAL CHARACTERISTICS PARAMETER Single-Ended Input Impedance Parallel Input Resistance Parallel Input Capacitance Single-Ended Output Impedance Parallel Output Resistance Parallel Output Capacitance Input Bias Current Ibs=I1+I4 / 2 Ibs=I8+I10 / 2 Input Offset Current Iios=I1 - I4 Iios=I8 - I10 Average Temperature Coefficient of Input Offset Current Output Offset Current (I6 - I12) Average Temperature Coefficient of Output Offset Current Output Voltage Operating Current (I6 + I12) I14 DC Power Dissipation DC characteristics (V+=12V, V-=-8V, I5=1.0mA, RL=3.9kΩ, Re=1.0kΩ, Ta=25°C) SYMBOL Rip Cip Rop Cop Ibs Ibc Iios Iioc ∆Iio IOC ∆IOC VO ID+ IDPD TEST CONDITION Signal Port, f =5.0MHz Signal Port, f =5.0MHz f =10MHz f =10MHz MIN. TYP. 200 2.0 40 5.0 12 12 0.7 0.7 2.0 15 90 8.0 2.0 3.0 33 MAX. 30 30 7 7 80 4.0 5.0 UNIT kΩ pF kΩ pF µA µA µA µA nA / °C µA nA / °C V mA mA mW -2- Ver.2003-12-09 NJM1496 ■ ELECTRICAL CHARACTERISTICS PARAMETER Carrier Feedthrough VCFT VCFT AC characteristics (V+=12V, V-=-8V, I5=1.0mA, RL=2.9kΩ, Re=1.0kΩ, Ta=25°C) SYMBOL TEST CONDITION VC=60mVrms sine wave offset adjusted fC=1.0kHz fC=10MHz VC=300mVP-P square wave fC=1.0kHz offset adjusted offset not adjusted fS=10kHz, 300mVrms sine wave offset adjusted fC=500kHz, 60mVrms sine wave fC=10MHz, 60mVrms sine wave VC=60mVrms sine wave fS=1.0kHz, 300mVrms sine wave VS=300mVrms sine wave │VC│=0.5Vdc VS=100mVrms, fS=1.0kHz │VC│=0.5Vdc fS=1.0kHz fS=1.0kHz, │VC│=0.5Vdc MIN. TYP. MAX. UNIT - 40 140 - µVrms µVrms VCFT VCFT Carrier Suppression VCS VCS Transadmittance Bandwidth (RL=50Ω) Carrier Input Port Signal Input Port Voltage Gain, Signal Channel AVS Signal Port Common Mode Input Voltage Range Signal Port Common Mode Rejection Ratio Differential Output Swing Capability CMV ACM DVout - 0.04 20 0.4 200 mVrms mVrms 40 - 65 50 - dB dB BW 3dB BW 3dB - 300 80 - MHz MHz 2.5 - 3.5 5.0 -85 8.0 - V/V VP-P dB VP-P ■ TEST CIRCUIT Ver.2003-12-09 -3- NJM1496 ■ TYPICAL CHARACTERISTICS Carrier Suppression Carrier Suppression Carrier Feedthrough Sideband Output -4- Ver.2003-12-09 NJM1496 ■ TYPICAL APPLICATIONS AM Modulator Circuit Product Detector (+12V DC Single Supply) [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver.2003-12-09 -5-