NJM2842
Very Low Output Low Dropout Regulator
GENERAL DESCRIPTION
The NJM2842 is a very low output voltage, low drop out regulators. It delivers up to 1A output current with the output voltage of 0.8 to 1.8V. The use of an external bias voltage can improve the transient response and the ripple rejection characteristics while maintaining minimum input to output voltage.
PACKAGE OUTLINE
NJM2842U2
NJM2842KH1
FEATURES • Output Voltage Range 0.8V to 1.8V • High Ripple Rejection 91 dB typ.( VO=1.2V) • Output Noise Voltage VNO=44 µVrms • Output Current IO(max)=1.0A • High Precision Output VO±1.0% • Dual Supply Voltage Type VIN, VBIAS (sequence free) • High Stability for Load 0.002%/mA (max) • Output Capacitor with 4.7µF ceramic capacitor (VO>1.0V) • Low Dropout Voltage 0.2V typ. @IO=600mA • ON/OFF Control • Built-in Thermal Overload Protection and Short Circuit Current Limit Protection • Bipolar Technology • Package Outline SOT-89-5, ESON6-H1, TO252-5 PIN CONNECTION
5 2 4
6 5 4 1 2 3
NJM2842DL3
1
2
3
1. CONTROL 2. GND 3. VOUT 4. VIN 5.VBIAS
1 2 3 6 5 4
Exposed Pad
1. VOUT 2. VBIAS 3. N.C. 4. CONTROL 5. GND 6. VIN
3
1. CONTROL 2. VOUT 3. GND 4. VIN 5.VBIAS NJM2842DL3
12345
NJM2842U2
NJM2842KH1
(Connected to GND)
BLOCK DIAGRAM
VIN VBIAS
Thermal Protection Bandgap Reference
VOUT
CONTROL
Over Current Protection
GND
Ver.2011-02-18
-1-
NJM2842
OUTPUT VOLTAGE RANK
D evice Name SOT-89-5 NJM2842U2-008 NJM2842U2-010 NJM2842U2-012 NJM2842U2-015 NJM2842U2-018 V out 0.8V 1.0V 1.2V 1.5V 1.8V Device Name ESON6-H1 NJM2842KH1-008 NJM2842KH1-010 NJM2842KH1-012 NJM2842KH1-015 NJM2842KH1-018 V out 0.8V 1.0V 1.2V 1.5V 1.8V Device Name TO252-5 NJM2842DL3-012 V out 1.2V
Available Fixed Output Voltage Setting Range: 0.8V to 1.8V
ABABSOLUTE MAXIMUM RATINGS PARAMETER SYNBOL Input Voltage VIN Bias Voltage VBIAS Control Voltage VCONT
SOT-89-5 Power Dissipation PD TO252-5 ESON6-H1 Operating Temperature Storage Temperature Topr Tstg
RATINGS +7 +7 +7 625 (*1) 2400 (*2) 1190(*1) 3125(*2) 440 (*3) 1200 (*4)
(Ta=25°C) UNIT V V V
mW
-40∼+85 °C -50∼+150 °C (*1): Mounted on glass epoxy board. (76.2x 114.3x1.6mm:EIA/JDEC standard size, 2Layers, copper area 100mm2) (*2): Mounted on glass epoxy board. (76.2x 114.3x1.6mm:EIA/JDEC standard size, 4Layers) (4Layers inner foil : 74.2 x 74.2mm Applying a thermal via hall to a board based on JEDEC standard JESD51-5) (*3): Mounted on glass epoxy board based on EIA/JEDEC. (101.5x 114.57x1.6mm, 2Layers, Use the Exposed Pad) (*4): Mounted on glass epoxy board based on EIA/JEDEC. (101.5x 114.57x1.6mm, 4Layers, Use the Exposed Pad) (4 Layers, Internal foil area: 99.5×99.5mm, Based on JEDEC Standard JESD51-5, used a Thermal Via Hole)
BIAS VOLTAGE INPUT RANGE VBIAS= +2.5V to +5.5V (VO
很抱歉,暂时无法提供与“NJM2842U2-012”相匹配的价格&库存,您可以联系我们找货
免费人工找货