0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
NJU3101

NJU3101

  • 厂商:

    NJRC

  • 封装:

  • 描述:

    NJU3101 - 4-BIT SINGLE CHIP TINY CONTROLLER - New Japan Radio

  • 详情介绍
  • 数据手册
  • 价格&库存
NJU3101 数据手册
NJU3101 n TERMINAL DESCRIPTION No. SYMBOL 1 PA0 2 PA1 3 PA2 4 PA3 FUNCTION 4-bit Input / Output PORTA. Selects a terminal circuit for PORT grouped with 4 lines from follows by the mask option. · C-MOS Input Terminal with Pull-up Resistance(IA) · C-MOS Input Terminal(IC) · C-MOS Output Terminal(OB) Maker Testing Terminal with Pull-down Resistance 5 TEST INPUT The terminal is recommended to connect to GND. Internal Oscillator Terminals. 6 OSC1 INPUT Connects a device selected from the ceramic or the crystal 7 OSC2 OUTPUT resonator, or the resistor, to these terminals for the internal oscillator. In the external clock operation, OSC1 is the external clock input terminal and OSC2 is normally open terminal. VSS – Power Source (0V) 8 9 INPUT RESET Terminal. RESET When the low level input-signal, the system is initialized. 10 PB0 INPUT/OUTPUT 1-bit Input / Output PORTB and PORTC. Selects a terminal circuit for each PORT from follows by the 11 PC0 INPUT/OUTPUT mask option. · C-MOS Input Terminal with Pull-up Resistance(IA) · C-MOS Input Terminal(IC) · Nch-FET Open-Drain Output Terminal with Pull-up Resistance(OA) · Nch-FET Open-Drain Output Terminal(OC) 12 PD0 INPUT/OUTPUT 2-bit Input / Output PORTD. Selects a terminal circuit for PORT grouped with 2 lines from 13 PD1 follows by the mask option. · C-MOS Input Terminal with Pull-up Resistance(IA) · C-MOS Input Terminal(IC) · C-MOS Output Terminal(OB) When the ports are selected as the input terminal, PD0 operates also as RESTART signal input terminal to return from STANDBY mode, and PD1 operates also as the Edge Detector Terminal. 14 PE0 INPUT/OUTPUT 2-bit Input / Output PORTE. Selects a terminal circuit for PORT grouped with 2 lines from 15 PE1 INPUT/OUTPUT follows by the mask option. · C-MOS Schmitt Trigger Input Terminal with Pull-up Resistance(IB) · C-MOS Schmitt Trigger Input Terminal(ID) · C-MOS Output Terminal(OB) VDD – Power Source (2.4V to 5.5V) 16 Note ) INPUT/OUTPUT : Input or Output is selected by the mask option. INPUT/OUTPUT INPUT/OUTPUT INPUT/OUTPUT INPUT/OUTPUT INPUT/OUTPUT 3 /3 NJU3101 MEMO [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
NJU3101
物料型号: - 型号为NJU3101,是一个4位单芯片微控制器。

器件简介: - NJU3101是由4位CPU核心、输入/输出选择端口、程序ROM、数据RAM和振荡电路(CR或陶瓷或晶体)组成的C-MOS 4位单芯片微控制器。它被封装在16脚封装中(DIP或DMP形式),因此它提供了一个成本和空间有效的替代方案,仅使用少量外部组件即可控制使用标准逻辑IC(例如74HC)或其他小型控制器的逻辑电路。

引脚分配: - NJU3101有16个引脚,包括电源(VDD和Vss)、复位(RESET)、振荡器终端(OSC1和OSC2)、输入/输出端口(PA1、PA2、PA3、PB0、PC0、PD0、PD1、PE0、PE1)和测试引脚(TEST)。

参数特性: - 内部程序ROM:512x8位。 - 内部数据RAM:16x4位。 - 输入/输出端口:10线。 - 高输出电流终端:15mA在Vop=5V时。 - 指令集:58条指令。 - 子程序嵌套:8级。

功能详解: - NJU3101适用于电池供电的设备,因为它具有低工作电流、宽工作电压范围和待机功能(HALT模式)。 - 具有脉冲边缘检测器,可以选择脉冲的上升或下降边缘。 - 具有待机功能(HALT模式),宽工作电压范围2.4V至5.5V,C-MOS技术。

应用信息: - NJU3101由于其丰富的指令集、低工作电流和待机功能,可广泛应用于各种市场。

封装信息: - NJU3101D和NJU3101M两种封装形式,分别为DIP16和DMP16。
NJU3101 价格&库存

很抱歉,暂时无法提供与“NJU3101”相匹配的价格&库存,您可以联系我们找货

免费人工找货