0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
NJU6214CC-V

NJU6214CC-V

  • 厂商:

    NJRC

  • 封装:

  • 描述:

    NJU6214CC-V - Small-Sized 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC - New Japa...

  • 详情介绍
  • 数据手册
  • 价格&库存
NJU6214CC-V 数据手册
NJU6214 Series Small-Sized 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC !GENERAL DESCRIPTION The NJU6214 series is a C-MOS quartz crystal oscillator IC realized excellent frequency stability for fundamental (up to 60MHz) oscillation, and consists of an oscillation amplifier, 4-stage divider, 3-state output buffer and a built-in LDO. The operating voltage is from 1.62V to 3.63V, and the LDO holds down the characteristic change of the oscillation amplifier for operating voltage variation, and has been stabilized oscillation frequency. The 4-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8 and f0/16 internal circuits is output. The 3-state output buffer is C-MOS compatible of high fan-out. The oscillation stopping current is very low stand-by mode below 1uA, therefore, it is suitable for the portable items of the communication equipment and the like. The pad arranges “L” location to be easy to put on 2016 size oscillator by wire bonding. !FEATURES "Frequency Stability ±1ppm@VDD±10% "Operating Voltage 1.62 to 3.63V "Maximum Oscillation Frequency Up to 60MHz "Low Operating Current 5mA typ.@60MHz/3.3V/15pF "4-Stage Divider Maximum Divider f0/16 "Built-in LDO "Oscillation Stop and Output Stand-by Function "3-State Output Buffer "Variable Pull-up Resistance on-Die "Oscillation Capacitors Cg and Cg on-Die "Package Outline Die/Wafer "C-MOS Technology !LINE-UP TABLE Type No. FOUT Internal Connect Short Open N A B B A 2 B A 4 B A 8 B A 16 Cg/Cd 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF !PACKAGE OUTLINE NJU6214XC-X !PAD LOCATION Die VDD VSS FOUT XTI XTO CONT !COORDINATES No Pad Name X Y 1 CONT -189 231 2 XTI -189 77 3 XTO -189 -77 4 VSS -189 -231 5 FOUT 215 -231 6 VDD 222 231 Starting Point: Die Center Unit[um] Die Size: 0.64x0.60mm Die Thickness (C-V): 130±10um Die Thickness (C-L): 140±10um Wafer Thickness (W-V): 130±10um Wafer Thickness (W-L): 140±10um Pad size: 70x70um Die Substrate: VSS level A f0 B f0/2 f0/4 NJU6214 C D f0/8 *E f0/16 * Under Development !EXAMPLE OF PART NUMBER 1)NJU6214AW-L FOUT=f0, Wafer Thickness=140um 2)NJU6214CC-V FOUT= f0/4, Die Thickness=130um 2010/04/27 ( 1 / 7 ) NJU6214 Series !BLOCK DIAGRAM VDD Regulator VSS XTO Rf XTI Level Shifter Cg Cd A 1/N Divider B 3-State Buffer FOUT OSC Detector CONT !TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control CONT FOUT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8 and f0/16 Note1) L Oscillation Stop and High impedance Output XTI Quartz Crystal Connecting Terminals XTO VSS VSS=0V : GND FOUT Frequency Output VDD VDD=1.62 to 3.63V Note1) Refer to the line-up table. !ABSOLUTE MAXIMUM RATINGS (VSS=0V, Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN -0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA ±10 Output Current IO mA ±25 Operating Temperature Range Topr -40 to +85 °C Storage Temperature Range Tstg -55 to +125 °C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. 2010/04/27 ( 2 / 7 ) NJU6214 Series !ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage Output Frequency Stability SYMBOL VDD df/f CONDITIONS fosc=60MHz VDD±10% MIN 1.62 TYP ±1 MAX 3.63 (Ta=25°C) UNIT V ppm PARAMETER SYMBOL Operating Current IDD CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load MIN (VDD=1.8V,Ta=+25°C) TYP MAX UNIT 3.0 4.0 1.8 2.6 mA 1.3 2.0 1.0 2.0 0.9 2.0 1 uA V V V V uA uA 1.8 0.54 0.18 2.7 0.25 Oscillation Stopping Current Input Voltage Output Voltage Input Current ISTB VIH VIL VOH VOL IIN IOH=2mA IOL=2mA CONT=0.8VDD CONT=0.2VDD 1.26 0 1.62 1.9 0.1 3-state Off Leakage IOZ CONT=VSS, FOUT= VDD or VSS ±0.1 uA Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise 3.2 5.0 ns tr CL=15pF, 0.1VDD to 0.9VDD Time Output Signal Fall 3.2 5.0 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1kΩ 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development. 2010/04/27 ( 3 / 7 ) NJU6214 Series (VDD=2.5V,Ta=+25°C) TYP MAX UNIT 3.7 5.0 2.4 3.3 mA 1.6 2.4 1.2 2.0 1.0 2.0 1 1.75 0 2.25 4.2 0.3 2.5 0.75 0.25 9.0 0.6 uA V V V V uA uA PARAMETER SYMBOL Operating Current IDD CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load MIN Oscillation Stopping Current Input Voltage Output Voltage Input Current ISTB VIH VIL VOH VOL IIN IOH=4mA IOL=4mA CONT=0.8VDD CONT=0.2VDD 3-state Off Leakage CONT=VSS, FOUT= VDD or VSS ±0.1 uA IOZ Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise tr CL=15pF, 0.1VDD to 0.9VDD 2.2 3.7 ns Time Output Signal Fall 2.2 3.7 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1kΩ 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development. 2010/04/27 ( 4 / 7 ) NJU6214 Series PARAMETER SYMBOL CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load 2.31 0 2.97 7.8 0.6 MIN (VDD=3.3V,Ta=+25°C) TYP MAX UNIT 5.0 7.0 3.2 4.4 mA 2.2 3.0 1.7 2.5 1.5 2.3 10 3.3 0.99 0.33 16.0 1.2 uA V V V V uA uA Operating Current IDD Oscillation Stopping Current Input Voltage Output Voltage Input Current ISTB VIH VIL VOH VOL IIN IOH=6mA IOL=6mA CONT=0.8VDD CONT=0.2VDD 3-state Off Leakage IOZ CONT=VSS, FOUT= VDD or VSS ±0.1 uA Current Feedback Resistance Rf 270 kΩ Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise 1.8 3.0 ns tr CL=15pF, 0.1VDD to 0.9VDD Time Output Signal Fall 1.8 3.0 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1kΩ 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC’s standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development. 2010/04/27 ( 5 / 7 ) NJU6214 Series !EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS L1 C1 R1 f[MHz] 60 C0 R1[Ω] 31.2 L1[mH] 3.75 C1[fF] 1.87 C0[pF] 0.92 !MEASUREMENT CIRCUITS (1)Operating Current, Output Signal Symmetry, Output Signal Rise/Fall Time (CL=15pF) 1/2VDD VDD XTI XTO VSS FOUT 0.1uF CL=15pF H L 90% 50% 10% tr tf (2)Output Disable Time (CL=15pF,RL=1kΩ) XTI XTO Pulse Generator 50 Ω VDD FOUT 0.1uF SS RL=1kΩ CONT 0.2VDD TPOZ CONTV CL=15pF FOUT VOL (3)Output Enable Time (CL=15pF) Pulse Generator Pulse Generator 50 Ω XTI XTO VDD FOUT 0.1uF SS CONT CL=15pF FOUT 0.8VDD TPZO VOH CONTV 50 Ω 2010/04/27 ( 6 / 7 ) NJU6214 Series ■2016 SIZE OSCILLATOR IMAGE DIAGRAM NJU6214 [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2010/04/27 ( 7 / 7 )
NJU6214CC-V
1. 物料型号: - NJU6214A:输出频率为f0,内部连接为Short,Cg/Cd为9.3/10.7pF。 - NJU6214B:输出频率为f0/2,内部连接为Open,Cg/Cd为9.3/10.7pF。 - NJU6214C:输出频率为f0/4,内部连接为4,Cg/Cd为9.3/10.7pF。 - NJU6214D:输出频率为f0/8,内部连接为8,Cg/Cd为9.3/10.7pF。 - NJU6214E:输出频率为f0/16,内部连接为16,Cg/Cd为9.3/10.7pF(正在开发中)。

2. 器件简介: NJU6214系列是一款C-MOS石英晶体振荡器IC,具有优秀的频率稳定性,适用于基频振荡(高达60MHz)。该系列包含振荡放大器、4级分频器、3态输出缓冲器和内置LDO。工作电压范围为1.62V至3.63V,LDO稳定振荡放大器的特性变化,降低供电电压变化对振荡频率的影响。4级分频器可生成f0、f0/2、f0/4、f0/8和f0/16中的一个频率,3态输出缓冲器与C-MOS兼容,具有高扇出。

3. 引脚分配: - CONT:控制振荡和3态输出缓冲器。 - XTI和XTO:石英晶体连接端。 - Vss:地。 - FOUT:频率输出。 - VDD:供电电压。

4. 参数特性: - 工作电压:1.62V至3.63V。 - 输出频率稳定性:在VDD±10%条件下为±1ppm。 - 最大振荡频率:60MHz。 - 低工作电流:典型值为5mA@60MHz/3.3V/15pF。 - 内置LDO:稳定振荡频率。 - 3态输出缓冲器:C-MOS兼容,高扇出。

5. 功能详解: - 3态输出缓冲器允许输出频率为f0、f0/2、f0/4、f0/8和f0/16中的一个。 - 振荡停止功能和高阻抗输出。 - 内置LDO降低供电电压变化对振荡放大器特性的影响。

6. 应用信息: - 适用于通信设备等便携式项目的低功耗需求。

7. 封装信息: - NJU6214XC-X:封装外形图。 - 焊盘位置:提供了详细的坐标信息,方便2016尺寸的振荡器通过线键合安装。
NJU6214CC-V 价格&库存

很抱歉,暂时无法提供与“NJU6214CC-V”相匹配的价格&库存,您可以联系我们找货

免费人工找货