NJU6366

NJU6366 Series Small Sized Quartz Crystal Oscillator sGENERAL DESCRIPTION sPACKAGE OUTLINE The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that consists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected NJU6366XC-C NJU6366XF1 of f0,f0/2,f0/4 and f0/8 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible Furthermore, the package is small-sized MTP-6. sFEATURES sPAD LOCATION/PIN CONFIGURATION qOperating Voltage 2.0 to 5.5V Thin-Chip qMaximum Oscillation Frequency 50MHz FOUT qLow Operating Current XT qHigh Fan-out IOH/IOL=4mA @2.5V VDD q3-Stage Divider One of f0,f0/2,f0/4 and f0/8 VSS CONT qOscillation Stop and Output Stand-by Function XT q3-State Output Buffer qOscillation Capacitors Cg and Cg on-chip MTP-6 qPackage Outline Thin-Chip/MTP-6 6 VSS FOUT 1 qC-MOS Technology VDD XT 2 3 5 4 XT CONT !LINE-UP TABLE Type No. A B C D FOUT f0 f0/2 f0/4 f0/8 Internal Connect Connect Non Connect A Line B,C,D Line B Line A,C,D Line C Line A,B,D Line D Line A,B,C Line Cg/Cd 23/23pF 23/23pF 23/23pF 23/23pF !COORDINATES Pad Name FOUT VSS XT X -207 -207 33 207 207 207 Y 247 -247 -247 -247 -17 172 NJU6366 CONT VDD XT Starting Point:Chip Center Unit[um] Chip Size:0.67x0.75mm Thin-Chip Thickness(-C):260±20um Pad Size:90x90um sBLOCK DIAGRAM XT Rf XT Cg Cd A CONT B C 3-STATE D BUFFER FOUT 1/2 1/2 1/2 VDD VSS 2002/01/17 ( 1 / 6 ) NJU6366 Series sTREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control FOUT CONT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4 and f0/8 Note1) L Oscillation Stop and High impedance Output Quartz Crystal Connecting Terminals XT VSS VSS=0V FOUT Frequency Output VDD VDD=2.5V/3.0V/5.0V Note1) Refer to the line-up table. sABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5~+7.0 V Input Voltage VIN VSS-0.5~VDD+0.5 V Output Voltage VO -0.5~VDD+0.5 V Input Current IIN mA ±10 Output Current IO mA ±25 Power Dissipation PD 200(MTP-6) mW Note4) Operating Temperature Range Topr -40~+85 °C Storage Temperature Range Tstg -55~+125 °C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. Note4) The power dissipation is the maximum value at only the package. XT 2002/11/29 ( 2 / 6 ) NJU6366 Series sELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage SYMBOL VDD CONDITIONS MIN 2.0 TYP (Ta=25°C) MAX UNIT 5.5 V (VDD=2.5V,Ta=25°C) MAX UNIT 5 4 mA 3 3 5 1 2.5 0.5 uA uA V V mA mA uA uA uA kΩ pF MHz 50 50 3 3 3 3 55 55 6 6 6 6 250 250 % ns ns ns ns PARAMETER Operating Current Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note5) SYMBOL IDD CONDITIONS A version,fosc=16MHz,CL=15pF B version,fosc=16MHz,CL=15pF C version,fosc=16MHz,CL=15pF D version,fosc=16MHz,CL=15pF MIN TYP ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL CONT =VSS, No load CONT =XT=VSS, No load Note5) 2.0 0 4 4 2 VOH=2.2V VOL=0.3V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz 50 CL=15pF, @VDD/2 CL=30pF, @VDD/2 CL=15pF,10%~90% CL=30pF,10%~90% CL=15pF,90%~10% CL=30pF,90%~10% CL=15pF,RUP=10kΩ CL=15pF,RUP=10kΩ 45 45 7.5 1.2 12.0 2.0 ±0.1 227 23/23 Excluding input current on CONT Terminal. 2002/11/29 ( 3 / 6 ) NJU6366 Series PARAMETER Operating Current Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note5) SYMBOL IDD CONDITIONS A version,fosc=16MHz,CL=15pF B version,fosc=16MHz,CL=15pF C version,fosc=16MHz,CL=15pF D version,fosc=16MHz,CL=15pF MIN (VDD=3.0V,Ta=25°C) TYP MAX UNIT 6 5 mA 4 4 2 Note5) 2.4 0 5 5 10.0 1.8 5 1 3.0 0.6 uA uA V V mA mA uA uA uA kΩ pF MHz 50 50 3 3 3 3 55 55 6 6 6 6 200 200 % ns ns ns ns ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL CONT =VSS, No load CONT =XT=VSS, No load VOH=2.7V VOL=0.3V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz 50 CL=15pF, @VDD/2 CL=30pF, @VDD/2 CL=15pF,10%~90% CL=30pF,10%~90% CL=15pF,90%~10% CL=30pF,90%~10% CL=15pF,RUP=10kΩ CL=15pF,RUP=10kΩ 45 45 15.0 3.0 ±0.1 227 23/23 Excluding input current on CONT Terminal. 2002/11/29 ( 4 / 6 ) NJU6366 Series PARAMETER Operating Current Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note5) SYMBOL IDD CONDITIONS A version,fosc=16MHz,CL=15pF B version,fosc=16MHz,CL=15pF C version,fosc=16MHz,CL=15pF D version,fosc=16MHz,CL=15pF MIN (VDD=5.0V,Ta=25°C) TYP MAX UNIT 10 9 mA 9 8 5 Note5) 3.5 0 8 8 27.0 5.5 10 1 5.0 1.5 uA uA V V mA mA uA uA uA kΩ pF MHz 50 50 3 3 3 3 55 55 6 6 6 6 100 100 % ns ns ns ns ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL CONT =VSS, No load CONT =XT=VSS, No load VOH=4.5V VOL=0.5V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz 50 CL=15pF, @VDD/2 CL=30pF, @VDD/2 CL=15pF,10%~90% CL=30pF,10%~90% CL=15pF,90%~10% CL=30pF,90%~10% CL=15pF,RUP=10kΩ CL=15pF,RUP=10kΩ 45 45 40.0 8.0 ±0.1 227 23/23 Excluding input current on CONT Terminal. 2002/11/29 ( 5 / 6 ) NJU6366 Series !MEASURMENT CIRCUITS (1)Output Signal Symmetry(CL=15pF) 1000pF Pulse Generator 50Ω XT VDD FOUT CL=15pF VSS 1/2VDD H L (2)Output Signal Rise/Fall Time(CL=15pF) 1000pF Pulse Generator 50Ω XT VDD FOUT CL=15pF VSS tr tf 90% 50% 10% (3)Output Disable/Enable Time(CL=15pF,RUP=10kΩ) VDD XT Pulse Generator 50Ω CONT VSS FOUT RUP=10kΩ CONT CL=15pF FOUT VOL 0.2VDD TPLZ 0.8VDD TPZL VOH [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2002/11/29 ( 6 / 6 )