NJU7663R

NJG1701V PHS MULTI-FUNCTION GaAs MMIC n GENERAL DESCRIPTION NJG1701V is a GaAs multi-function MMIC composed of a power amplifier, a SPDT switch and a LNA for Japanese PHS or WLL application. The SSOP20 package is adopted and effective for downsizing of handsets. NJG1701V is operated at low voltage with low current and low distortion PA, low loss switch and low noise and high gain LNA. n APPLICATION l PHS, Digital cordless phone n FEATURES (Operating frequency f=1.9GHz) Transmitting Mode Operation l Drain Voltage (PA) l Gain l Current consumption l Gain variable range Receiving Mode Operation l Drain Voltage (LNA) l Gain l Current consumption l NF l Control Voltage (SW) l Package n PIN CONFIGURATION V Type (Top View) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 n PACKAGE OUTLINE NJG1701V 3.0V typ. 32dB typ. 160mA typ. @POUT=20dBm 33dB typ. 3.0 typ. 14dB typ. 2.8mA typ. 2.7dB typ. 2.7V typ. SSOP20 (Mount Size: 6.4x6.5x1.25mm) Pin Connection 1.ANT 11.GND 2.GND 12.GND 3.VSW2 13.VDD3 4.GND 14.VDD2 5.VDD1 15.GND 6.VGG1 16.LNAOUT 7.VCONT 17.GND 8.VGG2 18.EXTIND 9.GND 19.GND 10.PAIN 20.VSW1 -1- NJG1701V n ABSOLUTE MAXIMUM RATINGS (Zs=Zl=50Ω, Ta=25°C) PARAMETER Drain Voltage1 Drain Voltage2 Gate Voltage Gain Control Voltage Control Voltage Input Power1 Input Power2 Power Dissipation Operating Temp. Storage Temp. SYMBOL VDD1 VDD2,3 VGG1,2 Vcont VSW1,2 ANT PAin PD Topr Tstg VDD1=3.0V, VSW1=0V, VSW2=2.7V VDD2,3=3.0V, VGG1,2=-0.9V At on PCB board VGG1,2=-0.9V VDD2,3=3.0V VDD2,3=3.0V CONDITIONS RATINGS 6.0 6.0 -4.0 -4.0 6.0 0 3 800 -30~+85 -40~+150 UNITS V V V V V dBm dBm mW °C °C n ELECTRICAL CHARACTERISTICS 1 (TRANSMITTING MODE: PAin–ANT) (f=1.90GHz, VSW1=2.7V, VSW2=0V, VCONT=0V, Zs=Zl=50Ω, VDD1=0V, Ta=25°C) PARAMETER Operating frequency Drain voltage Gate voltage Idle current *1 Operating current *1 Gate current *2 Gain control terminal current Gain control voltage Control voltage1 Control voltage2 Control current Small signal gain Gain flatness Gain control range Pout at 1dB gain compression point Adjacent Channel Leakage Power 1 Adjacent Channel Leakage Power 2 SYMBOL freq VDD2,3 VGG1,2 Iidle IDD2,3 IGG ICONT VCONT VSW1 VSW2 ISW1 Gain1 Gflat1 GCONT P-1dB Pacp1 CONDITIONS VDD2,3=3.0V VDD2,3=3.0V, Iidle=150mA VDD2,3=3.0V, No RF Signal Pout=20dBm, VDD2,3=3.0V Pout=20dBm, VDD2,3=3.0V Pout=20dBm, VDD2,3=3.0V -2.0