NJW1130A

NJW1130A PPRELIMINARY SOUND PROCESSOR with SOUND ENHANCEMENT s GENERAL DESCRIPTION The NJW1130A is a sound processor with sound enhancement (BBE). It includes all of functions processing audio signal for TV, such as tone control, balance, volume, mute, and AGC functions. Also the NJW1130A performs surround and sound enhancement. The sound enhancement regenerates high definitive and nearly real sound. 2 All of internal status and variables are controlled by I C BUS interface. s PACKAGE OUTLINE NJW1130G s FEATURES q Operating Voltage (8 to 13V) 2 q I C BUS Interface q BBE Sound Enhancement (Low Boost and High Boost: 15dB max.) q Internal 6 Input Audio Selectors and Monitor Output q The AGC circuit reduces volume difference among input sources. q Matrix Surround q Bi-CMOS Technology q Package Outline SOP40 s BLOCK DIAGRAM MON a AGC1 BBE BBE 1a 2a PS TONE TONE Ha La OUTa LINEa IN1a IN2a IN3a IN4a IN5a IN6a IN1b IN2b IN3b IN4b IN5b IN6b MON b AGC2 BBE BBE 2b 1b TONE TONE Lb Hb OUTb Input Selector Input Selector 4.5dB CVA CVB BBE Volume Tone Volume CTH CTL Control Logic AGC Surround AUX0 AUX1 SDA SCL BBE Volume Tone Volume GND Bias 4.5dB VCC LINEb Vref Ver.2.0 -1- NJW1130A s PIN FUNCTION Ach Input Selector1 Ach Input Selector2 Ach Input Selector3 Ach Input Selector4 Ach Input Selector5 Ach Input Selector6 Ach BBE Filter1 Ach BBE Filter2 Ach High Frequency Ach Low Frequency Ach Monitor Output Ach Line Output (4.5dB) Ach Output (0dB) AGC1 AGC2 DAC Output for Bch Volume & Balance DAC Output for Ach Volume & Balance I C BUS SDA I C BUS SCL GND 2 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 IN1a IN2a IN3a IN4a IN5a IN6a BBE1a BBE2a TONE-Ha TONE-La MONa LINEa OUTa AGC1 AGC2 CVB CVA SDA SCL GND IN1b IN2b IN3b IN4b IN5b IN6b BBE1b BBE2b TONE-Hb TONE-Lb MONb LINEb OUTb PS VREF CTH CTL AUX0 AUX1 Vcc 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 Bch Input Selector1 Bch Input Selector2 Bch Input Selector3 Bch Input Selector4 Bch Input Selector5 Bch Input Selector6 Bch BBE Filter1 Bch BBE Filter2 Bch High Frequency Bch Low Frequency Bch Monitor Output Bch Line Output(4.5dB) Bch Output(0dB) Phase Shift Reference Voltage DAC Output for Tone High Frequency DAC Output for Tone Low Frequency AUX Output0 AUX Output1 Power Supply Ver.2.0 -2- NJW1130A s ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER SYMBOL Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range V + RATING 14 700 -20 to +75 -40 to +125 UNIT V mW °C °C PD Topr Tstg s ELECTRICAL CHARACTERISTICS ( Ta=25°C V =9V, Rg=600Ω, RL=47kΩ, Vin=100mVrms/1kHz) + PARAMETER Operating Voltage Supply Current Reference Voltage Maximum Input Voltage Maximum Output Voltage1 Maximum Output Voltage2 MON OUT Gain LINEOUT Gain Maximum Gain Minimum Gain Channel Balance Balance Boost A Balance Cut A Balance Boost B Balance Cut B Total Harmonic Distortion Cross Talk1 Cross Talk 2 Cross Talk 3 Cross Talk 4 Cross Talk 5 Cross Talk 6 Channel Separation SYMBOL V + TEST CONDITION MIN. 8.0 TYP. 9.0 30 4.5 2.8 2.5 2.5 -2.0 4.5 0.0 0.0 0.0 0.0 - MAX. 13.0 50 5.0 6.5 2.0 -70 1.5 2.0 -70 2.0 -70 0.5 -70 -70 -70 -70 -70 -70 -70 UNIT V mA V Vrms Vrms Vrms dB dB dB dB dB dB dB dB dB % dB dB dB dB dB dB dB ICC VREF VIM VOM1 VOM2 GVMON GVLINE GVMAX GVMIN GCB BABST BACUT BBBST BBCUT THD CT1 CT2 CT3 CT4 CT5 CT6 CS No Signal No Signal VOL=C3H,THD=1% OUTPUT VOL=FFH,THD=1% LINEOUT VOL=FFH,THD=1% MON OUT LINEOUT,VOL=FFH VOL=FFH VOL=00H VOL=FFH CHS=”0”,BAL=”11111” CHS=”1”,BAL=”11111” CHS=”1”,BAL=”11111” CHS=”0”,BAL=”11111” Vo=0.5Vrms BW=400Hz to 30kHz SEL=”000” Vin=2Vrms In2/in3/in4/in5/In6 → out SEL=”001” Vin=2Vrms in1/in3/in4/in5/In6 → out SEL=”010” Vin=2Vrms in1/in2/in4/in5/In6 → out SEL=”011” Vin=2Vrms in1/in2/in3/in5/In6 → out SEL=”100” Vin=2Vrms in1/in2/in3/in4/In6 → out SEL=”101” Vin=2Vrms in1/in2/in3/in4/In5 → out Vin=2Vrms 4.0 2.6 2.5 -2.0 -1.5 -2.0 -2.0 - Ver.2.0 -3- NJW1130A s ELECTRICAL CHARACTERISTICS ( Ta=25°C, V =9V, Rg=600Ω, RL=47kΩ, Vin=100mVrms/1kHz) + PARAMETER Output Noise 1 Output Noise 2 Output Noise 3 SYMBOL VNO1 VNO2 VNO3 TEST CONDITION VOL=FFH BW=400Hz to 30kHz VOL=00H BW=400Hz to 30kHz LINEOUT VOL=FFH BW=400Hz to 30kHz LINEOUT VOL=00H BW=400Hz to 30kHz MIN. - TYP. -90 (31.6) -85 (56.2) MAX. -60 (1.0) -82 (79.4) -55 (1.8) -77 (141) UNIT dBV (mVrms) dBV (µVrms) dBV (mVrms) dBV (µVrms) Output Noise 4 q TONE CONTROL PARAMETER High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut High Frequency Cut DC Offset1 High Frequency Boost DC Offset2 Low Frequency Cut DC Offset1 Low Frequency Boost DC Offset2 q SUB-TONE CONTROL PARAMETER High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut VNO4 SYMBOL HFBST HFFLT HFCUT LFBST LFFLT LFCUT HFDC1 HFDC2 LFDC1 LFDC2 TEST CONDITION BCT=”1”,TREB=”1111”, f=10kHz TRBE=”0000”,f=10kHz BCT=”0”,TRBE=”1111”, f=10kHz BCB=”1”,BASS=”1111”, f=100Hz BASS=”0000”,f=100Hz BCB=”0”,BASS=”1111”, f=100Hz BCT=”0”,TREB=”1111” →”0000” BCT=”1”,TREB=”1111” →”0000” BCB=”0”,BASS=”1111” →”0000” BCB=”1”,BASS=”1111” →”0000” TEST CONDITION BCST=”0”,SUB-TREB=”11” ,f=10kHz SUB-TREB=”00”,f=10kHz BCST=”0”,SUB-TREB=”11” ,f=10kHz BCSB=”1”,SUB-BASS=”11” ,f=100Hz SUB-BASS=”00”,f=100Hz BCSB=”1”,SUB-BASS=”11” ,f=100Hz MIN. 12.5 -2.0 -12.5 12.5 -2.0 -12.5 -1.0 -1.0 -1.0 -1.0 TYP. 15.0 0.0 -15.0 15.0 0.0 -15.0 0.0 0.0 0.0 0.0 MAX. 17.5 2.0 -17.5 17.5 2.0 17.5 1.0 1.0 1.0 1.0 UNIT dB dB dB dB dB dB V V V V SYMBOL SHFBST SHFFLT SHFCUT SLFBST SLFFLT SLFCUT MIN. 2.0 -2.0 -4.0 2.0 -2.0 -4.0 TYP. 3.0 0.0 -3.0 3.0 0.0 -3.0 MAX. 4.0 2.0 -2.0 4.0 2.0 -2.0 UNIT dB dB dB dB dB dB Ver.2.0 -4- NJW1130A q AGC CONTROL: AGC=”1” (AGC-ON) PARAMETER AGC BOOST AGC FLAT AGC CUT SYMBOL AGCBST AGCFLT AGCCUT TEST CONDITION Vin=50mVrms Vin=150mVrms Vin=2Vrms MIN. 1.5 -2.5 -14 TYP. 3.5 0.0 -10 MAX. 5.5 2.5 -6.0 UNIT dB dB dB q SURROUND CONTROL: SUR=”1” (SURROUND-ON) PARAMETER SURROUND MIX 1 SURROUND MIX 2 SURROUND DEF DC Offset q BBE (BBE-ON) PARAMETER BBE Low Frequency Boost Range BBE High Frequency Boost Range SYMBOL BBELOW BBEHIGH TEST CONDITION BBE-Low=”1111”,f=10kHz BBE-High=”1111”,f=50kHz MIN. TYP. 15.0 15.0 MAX. UNIT dB dB SYMBOL SRMIX1 SRMIX2 SRDEF SRDC TEST CONDITION Ain → Bout Bin → Aout Ain-Bin(-180deg) SUR=”0” → “1” MIN. -2.0 -2.0 8.0 -1.0 TYP. 0.0 0.0 10.0 0.0 MAX. 2.0 2.0 12.0 1.0 UNIT dB dB dB V Ver.2.0 -5- NJW1130A s APPLICATION CIRCUIT 4.7µ 1 4.7µ 2 4.7µ 3 4.7µ 4 4.7µ 5 4.7µ 6 3.3n 33n 1.5n 220n 4.7µ 11 4.7µ 12 4.7µ 13 1µ 100n 4.7µ 4.7µ 14 15 16 17 18 19 20 OUTa AGC1 AGC2 CVB CVA SDA SCL GND OUTb PS VREF CTH CTL AUX0 AUX1 Vcc 28 27 26 25 24 23 22 21 LINEa LINEb 29 MONa MONb 30 7 8 9 10 IN6a BBE1a BBE2a TONE-Ha TONE-La IN6b BBE1b BBE2b TONE-Hb TONE-Lb 35 34 33 32 31 IN5a IN5b 36 IN4a IN4b 37 IN3a IN3b 38 IN2a IN2b 39 IN1a IN2b 40 4.7µ 4.7µ 4.7µ 4.7µ 4.7µ 4.7µ 3.3n 33n 1.5n 220n 4.7µ 4.7µ 4.7µ 100n 4.7µ 4.7µ 4.7µ 22µ Ver.2.0 -6- NJW1130A s I C BUS Block CHARACTERISTICS (SDA, SCL) PARAMETER High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current Low Level Output Voltage (3mA at SDA pin) Maximum Output Current Maximum Clock Frequency Data Change Minimum Waiting Time Data Transfer Start Minimum Waiting Time Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Start Preparation Waiting Time Minimum Data Hold Time Minimum Data Preparation Time Rise Time Fall Time Minimum Stop Preparation Waiting Time 2 2 SYMBOL VIH VIL IIH IIL VOL IOL fSCL tBUF tHD:STA tLOW THIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO MIN. 3.0 0 0 -3.0 0 4.7 4.0 4.7 4.0 4.7 5.0 250 4.7 TYP. - MAX. 5.0 1.5 10 10 0.4 100 1.0 300 - UNIT V V µA µA dB mA kHz µS µS µS µS µS µS nS µS nS µS I C BUS Load Condition: Pull up resistance 4kΩ (Connected to +5V) Load capacitance 200pF (Connected to GND) SDA tBU tR tF tHD:ST SCL tHD:ST P S tLOW tHD:DA tHIGH tSU:DA Sr tSU:ST tSU:ST P Ver.2.0 -7- NJW1130A s DEFINITION OF I C REGISTER 2 q I C BUS FORMAT MSB LSB MSB LSB MSB LSB 2 S 1bit Slave Address 8bit A 1bit Select Address 8bit A 1bit Data 8bit A 1bit P 1bit S: Starting Term A: Acknowledge Bit P: Ending Term q SLAVE ADDRESS MSB LSB 1 0 0 0 0 0 1 R/W R/W=0: Receive Only q CONTROL REGISTER TABLE Select Address BIT D7 CHS BCB BCT BBE-Low OUT SEL * BASS TREB D6 D5 D4 VOL BAL D3 D2 D1 AGC D0 SUR 00H 01H 02H 03H 04H 05H * : Don’t care. BCSB BCST BBE-High SUB-BASS SUB-TREB AUX1 AUX0 q CONTROL REGISTER DEFAULT VALUE Select Address BIT D7 0 0 0 0 0 0 D6 0 0 0 0 0 0 D5 0 0 0 0 0 0 D4 0 0 0 0 0 0 D3 0 0 0 0 0 0 D2 0 0 0 0 0 0 D1 0 0 0 0 0 0 D0 0 0 0 0 0 0 00H 01H 02H 03H 04H 05H q CONTROL COMMAND TABLE Ver.2.0 -8- NJW1130A Select Address BIT D7 D6 F F F F D5 D4 VOL D3 D2 F E D C : : 3 2 1 0 D1 D0 REMARKS VOL : Volume control for both Ach and Bch (0.33dB/step) Ex.) FFH=0dB FEH=-0.33dB FDH=-0.66dB FCH=-1.0dB : : 03H=-84dB 00H=MUTE 00H : : 0 0 0 0 CHS 0 0 0 0 0 0 0 0 BAL 0 0 0 0 : 0/1 : : 1 1 1 1 BCB 0 0 0 0 0 0 0 0 : 0/1 : : 1 1 1 1 BCT 0 0 0 0 0 0 0 0 : 0/1 : : 1 1 1 1 1 1 1 1 0 0 1 1 0 1 0 1 0/1 1 1 1 1 TREB 0 0 1 1 0 1 0 1 0 0 1 1 0 1 0 1 BCST 0/1 1 1 1 1 BASS 0 0 1 1 0 1 0 1 1 1 1 1 0 0 1 1 0 1 0 1 BCSB 0 0 1 1 0 1 0 1 AGC SUR 01H 0/1 0/1 CHS : Channel select for Balance control “0”=Ach , ( Bch is attenuated. ) “1”=Bch , ( Ach is attenuated. ) BAL : Balance control for both Ach and Bch (1dB/step) Ex.) “00000”=0dB “00001”=-1dB : : “11110”=-30dB “11111”=MUTE AGC : AGC switch “0”=AGC OFF “1”=AGC ON SUR : Surround mode switch “0”=Surround OFF “1”=Surround ON BCB : Boost-cut select for Bass control “0”=Cut “1”=Boost BASS : Bass control (1dB/step) Ex.) “0000”=0dB “0001”=1dB : “1110”=14dB “1111”=15dB BCSB : Boost-cut select for Sub-Bass control “0”=Cut “1”=Boost SUB-BASS : Sub-Bass control (1dB/step) “00”=0dB “01”=1dB “10”=2dB “11”=3dB BCT : Boost-cut select for Treble control “0”=Cut “1”=Boost TREB : Treble control (1dB/step) Ex.) “0000”=0dB “0001”=1dB : “1110”=14dB “1111”=15dB BCST : Boost-cut select for Sub-Treble control “0”=Cut “1”=Boost SUB-TREB : Sub-Treble control (1dB/step) “00”=0dB “01”=1dB “10”=2dB “11”=3dB SUB-BASS 0 0 1 1 0 1 0 1 02H SUB-TREB 0 0 1 1 0 1 0 1 03H Ver.2.0 -9- NJW1130A q CONTROL COMMAND TABLE Select Address BIT D7 0 0 0 D6 0 0 0 : : : D5 0 0 1 D4 0 1 0 D3 0 0 0 D2 0 0 0 : : : D1 0 0 1 D0 0 1 0 REMARKS BBE-Low : Boost level control for BBE Lo-Contour (1dB/step) Ex.) “0000”=0dB “0001”=1dB : “1110”=14dB “1111”=15dB BBE-High : Boost level control for BBE Process (1dB/step) Ex.) “0000”=0dB “0001”=1dB : “1110”=14dB “1111”=15dB When all bits are “0”(=00H), BBE becomes off. OUT : ON / OFF switch for OUTPUT “0”=OFF “1”=ON SEL : Input selector “000”=Input 1 “001”=Input 2 “010”=Input 3 “011”=Input 4 “100”=Input 5 “101”=Input 6 AUX1/AUX2 : Auxiliary port ON/OFF “0”=OFF “1”=ON BBE-Low BBE-High 04H 1 1 1 OUT 1 1 1 0 1 1 SEL 1 0 1 1 1 1 1 1 1 0 1 1 AUX1 1 0 1 AUX2 0 0 0 0 0 1 1 0 0 1 0 1 0 don’t care 0/1 0/1 05H 0/1 0 1 s NOTE The NJW1130A is manufactured by New Japan Radio Co., Ltd. under license from BBE Sound Inc. BBE is a registered trademark of BBE Sound Inc. A license from BBE Sound Inc. is required before the NJW1130A can be purchased from New Japan Radio Co.Ltd. BBE Sound, Inc. 5381 Production Drive Huntington Beach, CA 92649 Tel : (714)897-6766 Fax : (714)896-0736 2 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver.2.0 - 10 -