AS24BP

厂商：
NKK
封装：
插件
描述：
Slide Switch SP3T Through Hole

数据手册：

下载AS24BP.pdf

立即购买

详情介绍
数据手册
价格&库存

AS24BP 数据手册

Subminiature Slides Series AS Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Available in various actuator lengths. Antistatic superstructure of carbon blended polyacetal prevents static discharge to the contacts. Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 2.55N Nonshorting (break-before-make) Pretravel: .082” (2.1mm); Overtravel: .016” (0.4mm); Total Travel: .098” (2.5mm) Materials & Finishes Actuator: Upper Case Housing: Lower Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Glass fiber reinforced polyamide Carbon blended polyacetal (antistatic) Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 192 hours @ 40°C (104°F) 10 ~ 60Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 30 minutes 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: for single pole see Profile B in Supplement section; for double pole see Profile A. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications UL Recognition or CSA Certification: The A Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides TYPICAL SWITCH ORDERING EXAMPLE Series AS H AS POLES 1 2 SPST SPDT DPDT SP3T 1 2 3 4 2 CIRCUITS ON ON ON ON NONE NONE OFF ON OFF ON ON ON A B C 2 ACTUATORS A PC TERMINALS P *B *H *V Straight Straight with Bracket Right Angle with Bracket Vertical with Bracket * Bracketed models are ESD protected .098” (2.5mm) Long Flush .150” (3.8mm) Long DESCRIPTION FOR TYPICAL ORDERING EXAMPLE AS22AH DPDT ON-NONE-ON Circuit .098” (2.5mm) Long Actuator Right Angle PC Terminals POLES & CIRCUITS Slide Position Left Pole SP SP Model AS11 AS12 AS13 AS22 AS23 ON ON ON ON ON NONE NONE OFF NONE OFF OFF ON ON ON ON 3-1 2-1 2-1 2-1 5-4 2-1 5-4 OPEN OPEN OPEN OPEN OPEN OPEN 2-3 2-3 2-3 5-6 2-3 5-6 Center Right Left Connected Terminals Center Right Throw & Schematics Note: Terminal numbers are not actually on the switch. SPST SPDT 1 2 1 (COM) 3 4 INTERNAL CONNECTION 1 3 2 (COM) 3 5 6 DP DPDT For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Left ON External Connection 5 2 (in) External Connection Right ON External Connection 5 2 (in) Center ON External Connection 5 2 (in) The SP3T model utilizes a double pole base. External connections must be made during field installation. (out) Common (in) 1 2 3 4 5 6 (out) SP AS24 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) External Conn (out) 2-1 5-4 2-3 5-4 2-3 5-6 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides ACTUATORS A .098” (2.5mm) Long (2.5) .098 Series AS (3.8) .150 B (2.4) .094 Flush (2.4) .094 (2.4) .094 C .150” (3.8mm) Long (2.4) .094 (2.4) .094 (2.4) .094 Actuator Color: Gray standard; contact factory for other colors. PC TERMINALS P Straight (2.54) Typ .100 (0.6) Dia Typ .024 B Straight with Bracket (5.08) .200 (5.08) .200 (0.3) Typ .012 H (10.16) .400 (2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028 Right Angle with Bracket (2.54) Typ .100 (2.54) Typ .100 (0.6) Dia Typ .024 V Vertical with Bracket (5.08) .200 (0.6) Dia Typ .024 (0.5) Typ .020 (5.08) Typ .200 (0.8) .031 (5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 (9.0) .354 (2.54) Typ .100 (5.08) .200 (0.3) .012 (0.7) .028 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 Use of a support bracket is recommended to increase PCB mounting strength and stability. TYPICAL SWITCH DIMENSIONS Straight PC (2.4) Sq .094 (0.4) Typ .016 (2.06) .081 Single Pole P/N This Side (0.6) Dia Typ .024 1 2 3 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (9.8) .386 (1.0) .039 C L 2 3 (0.3) .012 (5.38) .212 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 C L AS12AP Actuator shown in LEFT position Single throw models do not have terminal 2. Straight PC (2.4) Sq .094 (0.4) Typ .016 (2.06) .081 Double Pole P/N This Side (0.6) Dia Typ .024 1 2 3 4 5 6 4 1 2 3 (5.08) .200 (9.8) .386 5 6 (0.4) .016 (9.2) .362 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 AS22AP Actuator shown in LEFT position Straight PC • Bracket (2.4) Sq .094 (2.06) .081 Single Pole P/N This Side (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (0.3) .012 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 C L 1 2 3 (0.7) Typ .028 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 (9.8) .386 (1.0) .039 (2.54) .100 2 3 (5.7) .224 (3.1) .122 C L AS12AB Actuator shown in LEFT position N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides TYPICAL SWITCH DIMENSIONS Straight PC • Bracket (2.4) Sq .094 (2.06) .081 Series AS Double Pole P/N This Side (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (0.4) .016 (9.5) .374 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 1 2 3 4 5 6 4 1 2 3 (5.08) .200 (9.8) .386 (0.7) Typ .028 (5.08) .200 5 6 (2.54) Typ .100 (0.8) Dia Typ .031 AS22AB Actuator shown in LEFT position Right Angle PC (2.5) Travel .098 (2.06) .081 (2.4) Sq .094 (0.3) .012 (0.3) Typ .012 (5.08) .200 (0.7) .028 (9.8) .386 (2.5) .098 Single Pole P/N This Side (0.8) .031 (3.3) .131 3 2 1 (6.18) .243 1 2 3 (2.54) Typ .100 (5.08) .200 (9.9) .389 (3.1) .122 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 AS12AH Actuator shown in LEFT position (2.5) Travel .098 (2.06) .081 Right Angle PC (2.4) Sq .094 (0.4) .016 Double Pole P/N This Side (0.8) .031 3 2 5 1 4 (5.2) .205 (0.7) .028 (2.54) .100 (5.08) .200 (3.1) .122 (0.5) .020 6 (10.0) .394 1 4 2 5 (2.54) Typ .100 (2.54) 3 .100 6 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 (0.3) Typ .012 (5.08) .200 (9.8) .386 (2.5) .098 (12.4) .489 AS22AH Actuator shown in LEFT position Vertical PC (2.4) Sq .094 (0.4) .016 (2.06) .081 Single Pole P/N This Side (0.8) .031 1 2 3 (2.5) Travel .098 (0.3) Typ .012 (2.54) .100 (0.7) Typ .028 (2.54) .100 (2.54) .100 (2.5) .098 (15.0) .589 (5.3) .208 (0.5) .020 (1.0) (3.1) .039 .122 (2.54) Typ .100 (10.2) .402 1 2 3 (1.0) .039 (2.54) Typ .100 (0.6) Dia Typ .024 (1.0) .039 C L C L (0.8) Dia Typ .031 (2.54) .100 (5.7) .224 AS12AV Actuator shown in LEFT position Vertical PC (2.4) Sq .094 (0.4) .016 (2.06) .081 Double Pole P/N This Side (0.8) .031 1 4 5 6 4 1 2 3 (0.3) Typ .012 (5.08) .200 (9.5) .374 (2.5) Travel .098 (0.7) .028 (5.08) .200 (2.5) .098 (5.3) .208 (1.0) (0.5) (3.1) .039 .020 .122 (2.54) Typ .100 2 3 (10.2) .402 5 6 (5.08) .200 (2.54) Typ .100 (5.08) .200 (15.0) .589 (0.6) Dia Typ .024 (5.08) .200 (0.8) Dia Typ .031 AS22AV Actuator shown in LEFT position 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

下载 PDF

AS24BP

1. 物料型号： - NKK Subminiature Slides Series AS

2. 器件简介： - 该系列开关为亚小型尺寸，节省PCB板上的空间，专为逻辑级应用开发。采用获奖的STC接触机制，具有更平滑、确定的触感动作、增加的接触稳定性和无与伦比的逻辑级可靠性。具有防静电的超结构，可防止静电放电到接触点。多种驱动器长度可选，并且有匹配的指示器可供选择。

3. 引脚分配： - 提供了2极和3极配置，包括SPST、SPDT、DPDT等类型，具体连接的端子会根据型号和配置有所不同。例如，SPST型号AS11的端子连接为3-1（ON）和OPEN（OFF），而SPDT型号AS12和AS13的端子连接为2-1（ON）和2-3（OFF）。

4. 参数特性： - 电阻负载：逻辑级0.4VA最大值@28V AC/DC最大值（适用范围0.1mA~0.1A@20mV~28V） - 接触电阻：最大50毫欧 - 绝缘电阻：最小500兆欧@500V DC - 耐压：AC 500V至少1分钟 - 机械寿命：至少50,000次操作 - 电气寿命：至少50,000次操作 - 操作力：非短路（断开前接通）2.55N - 行程：预行程.082”（2.1mm）；过行程.016”（0.4mm）；总行程.098”（2.5mm）

5. 功能详解： - 提供了详细的开关操作示例，包括不同极性、位置和连接的端子。例如，SPST型号在中心和右侧位置为断开状态，而左侧位置为接通状态。

6. 应用信息： - 适用于低电压、低电流的逻辑级电路。当按照逻辑级电路的意图使用时，结果不会产生危险能量。

7. 封装信息： - 提供了详细的安装和操作尺寸图，包括直插PCB、带支架的直插PCB、直角PCB和垂直PCB等不同安装方式的尺寸。

AS24BP 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“AS24BP”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

AS24BP

相关技术文章