AT4082

Toggles Series SK Low & Medium Security Keylocks Rockers General Specifications Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Programmable Illuminated PB Keylocks F Zinc alloy with chrome plating (matte) for low security models; brass with nickel plating (shiny) for medium security models Zinc alloy with chrome plating (matte) for low security models; zinc alloy with chrome plating (shiny) for medium security models Zinc alloy with chrome plating (matte) for low security models; zinc alloy with chrome plating (shiny) for medium security models Phenolic resin (thermoset) Silver Silver capped copper with silver plating Copper or brass with silver plating Rotaries Key: Tumbler Barrel: Housing/Bushing: Base: Movable Contactor: Stationary Contacts: Terminals: Slides Materials & Finishes 10 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 30,000 cycles minimum 10,000 cycles minimum .026Nm (.234 lb•in) for low & medium security Break-before-make 90° for 2-position & 45° for 3-position –25°C through +70°C (–13°F through +158°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Tactiles Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Torque: Contact Timing: Angle of Throw: Tilt Other Ratings Pushbuttons Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC for low & medium security; 1A @ 250V AC for low security Installation Touch Mounting Torque: 1.5Nm (13.28 lb • in) maximum Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications Supplement Accessories Indicators UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” to end of part number to order UL recognized switch. All low security models recognized at 3A @ 125V AC or 1A @ 250V AC & all medium security models recognized at 3A @ 125V AC CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. All low security models certified at 3A @ 125V AC or 1A @ 250V AC www.nkkswitches.com F9 Toggles Series SK Rockers Distinctive Characteristics Pushbuttons 12mm diameter bushing for easy panel cutout preparation and high density mounting. Rotaries Keylocks Programmable Illuminated PB Epoxy sealed terminals prevent entry of flux and other contaminants. Short behind panel dimension - only 1.063” (27.0mm). F High dielectric strength of 1,500 volts between contacts and case. Detent mechanism gives crisp, positive action for accurate switch setting. Dust resistant interior construction protects contacts. Tilt Tactiles Slides Low & Medium Security Keylocks Supplement Accessories Indicators Touch Actual Size F10 www.nkkswitches.com Series SK Toggles Low & Medium Security Keylocks TYPICAL SWITCH ORDERING EXAMPLE Poles 1 W 01 Lock Mechanisms SPDT Rockers A Pushbuttons 2B Terminals A Low Security D Medium Security (not combinable with code 3D circuit) 01 Programmable Illuminated PB 1 Solder Lug Contact Material Circuits & Key-Removable Positions Pos. 1 Pos. 2 Pos. 3 Key Removes 2A ON NONE ON Positions 1 and 3 2B ON NONE ON Position 1 3D ON OFF ON Positions 1, 2, 3 3E ON OFF ON Position 2 W F Silver Rated 3A @ 125V AC Slides Rotaries Code Keylocks SK IMPORTANT: Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch SK12BAW01 Solder Lug Terminals Indicators Silver Contacts Rated 3A @ 125V AC SPDT ON-NONE-ON Circuit Key Removable in Position 1 Accessories Low Security Lock Mechanism Supplement 2 keys supplied with each switch www.nkkswitches.com F11 Series SK Toggles Low & Medium Security Keylocks Rockers POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Connected Terminals Key Positions Pole & Throw Model Pos 1 Pos 2 Pos 3 Pos 1 SPDT SK12A ON NONE ON COM-1 = Key Removable (Terminal numbers are on switch) Pos 2 Pos 3 Schematic • = Not Removable = Maximum Arc POS 1 ____ COM-2 COM Pushbuttons 3 SPDT ON NONE ____ COM-2 Programmable Illuminated PB SPDT *SK13D ON OFF ON COM-1 OPEN COM-2 SPDT SK13E ON OFF ON COM-1 OPEN COM-2 1 2 POS 1 COM 1 2 3 2 3 POS 1 2 * Available with low security only KEY REMOVABLE F A Positions 1 & 3 90° Angular Throw B Rotaries Slides COM-1 3 Position 1 90° Angular Throw D Positions 1, 2 & 3 45° Angular Throw E Position 2 45° Angular Throw LOCK MECHANISMS & KEYS A D Low Security Mechanism Medium Security Mechanism Zinc Alloy with Chrome Plating (matte finish) Brass with Nickel Plating (shiny finish) Two keys provided with each switch (no master key available) One key provided with each switch (no master key available) For ordering additional keys: AT4081 for SK12A and SK12B, marked “1201” AT4082 for SK13D and SK13E, marked “1301” For ordering additional keys, indicate the same key number that is engraved on the face of your switch. Tilt Tactiles ON OP E N Keylocks SK12B POS 1 AT4081 Touch (17.0) .669 Key numbers (001 through 010) randomly assigned. Typical Key Ordering Example: AT4124-001 Indicators (14.2) .559 (1.8) .071 (9.4) .370 Accessories AT4082 (17.0) .669 Supplement (14.2) .559 (1.8) .071 F12 (9.4) .370 www.nkkswitches.com (20.0) .787 (16.2) .638 (1.8) .071 (13.7) .539 Toggles Series SK CONTACT MATERIALS, RATINGS, & TERMINALS Power Level 3A @ 125V AC (4.5) .177 Epoxy Seal (2.0) .079 (2.0) .079 (1.1) .043 Thk = (0.8) .031 Solder Lug Terminals Pushbuttons 01 Rockers Silver over Silver Programmable Illuminated PB W TYPICAL SWITCH DIMENSIONS (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 M12 P1 90° M (0.5) .020 (3.0) .118 (13.2) .520 (14.0) Dia .551 F (2.0) Typ .079 (4.5) .177 (13.0) .512 (10.8) .425 (30.0) 1.181 Rotaries (17.0) .669 CO POS 3 1 2 POS 1 Low Security • 90° Angular Throw Keylocks Low & Medium Security Keylocks POS 2 45° 45° (1.1) x (2.0) Typ .043 x .079 (2.0) Typ .079 M12 P1 Tilt M 2 O (0.8) Typ .031 (13.0) .512 (30.0) 1.181 (4.5) .177 SK13EAW01 Supplement Accessories (10.8) .425 Touch (3.0) .118 (13.2) .520 Indicators (14.0) Dia .551 (17.0) .669 (0.5) .020 1 POS 3 C POS 1 Low Security • 45° Angular Throw Tactiles Slides SK12BAW01 www.nkkswitches.com F13 Series SK Toggles Low & Medium Security Keylocks TYPICAL SWITCH DIMENSIONS POS 1 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 M12 P1 Pushbuttons Programmable Illuminated PB M (2.0) Typ .079 (10.0) (3.5) .394 .138 (15.3) .602 (15.0) Dia .591 (13.0) .512 (32.7) 1.287 (4.5) .177 (10.8) .425 SK12ADW01 Medium Security • 45° Angular Throw POS 1 F 45° Rotaries (0.75) .0295 M (2.0) Typ .079 (10.0) (3.5) .394 .138 (15.3) .602 (15.0) Dia .591 Slides CO (20.0) .787 POS 3 006 006 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 M12 P1 45° POS 2 1 2 Keylocks CO (20.0) .787 (0.75) .0295 POS 3 005 90° 005 1 2 Rockers Medium Security • 90° Angular Throw (13.0) .512 (32.7) 1.287 (4.5) .177 (10.8) .425 SK13EDW01 Tactiles PANEL CUTOUT & THICKNESS (12.0) Dia .472 Tilt The 12mm bushing is .512” (13.0mm) long. It allows mounting these devices in a maximum effective panel thickness of .315” (8.0mm). Touch (11.2) .441 Indicators STANDARD HARDWARE AT527M Hex Mounting Nut (12.1) .476 AT508 Internal Tooth Lockwasher M12 P1 Supplement Accessories (14.0) .551 1 included with each switch 1 included with each switch Steel with nickel plating Steel with zinc/chromate plating (16.0) .630 F14 (15.8) Dia .622 (2.0) .079 www.nkkswitches.com (13.8) Dia .543 (1.0) .039 (0.5) .020