B25KH-AG

Series B Washable Subminiature Antistatic Toggle Switches TYPICAL SWITCH ORDERING EXAMPLE B 1 2 A B POLES 1 2 SPDT DPDT SP3T PC TERMINALS CIRCUITS 2 3 5 8 9 4 ON NONE ON ON OFF ON ON NONE (ON) (ON) OFF (ON) ON OFF (ON) ON ON ON ( ) = Momentary Straight Straight with Bracket Right Angle with Bracket Vertical with Bracket Straight Long P B H V W OPTIONAL CAPS TOGGLES A J E H K L .394" Bat .248" Bat .394" Flatted .248" Flatted Snap Top for A or B Paddle Locking Lever (with Circuits 2 & 3 only) G J .394" Bat Lever Cap .248" Bat Lever Cap PADDLES A B Short Paddle for K Toggle Long Paddle for K Toggle CAP COLORS DESCRIPTION FOR TYPICAL ORDERING EXAMPLE B12AB .394" Toggle A B C --------- PADDLE COLORS Black White Red Yellow Green Blue Gray A B C E F G H SPDT ON-NONE-ON Circuit Straight PC Terminals with Bracket NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 www.nkkswitches.com 8-01 Series B Washable Subminiature Antistatic Toggle Switches GENERAL SPECIFICATIONS Electrical Capacity (Resistive Load) 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement Index (page Z1) to find explanation of operating range. Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Force: Contact Timing: Angle of Throw: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum for locking lever models 50,000 operations minimum Withstands 3 kilovolts ESD Toggles A & E & K w/Long Paddle: 150 grams (momentary); 120 grams (maintained) Toggles J & H & K w/Short Paddle: 278 grams (momentary); 188 grams (maintained) Toggle L: 60 grams Nonshorting 26° Materials & Finishes Toggle: Bushing: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating over silver plating Brass with gold plating over nickel undercoating Brass with gold plating over nickel undercoating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: -30°C through +85°C (-22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50g acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Soldering Time & Temperature: Process Seal: 3 seconds @ 350°C or 5 seconds @ 270°C See Supplement Index (page Z1) for specific processing data. Standards & Certifications Flammability Standards: IECQ Approved: UL94V-0 available All toggle models recognized at 0.4VA maximum @ 28V AC/DC maximum Qualification Approval Number: JP792-4A NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 www.nkkswitches.com 8-01 Series B Washable Subminiature Antistatic Toggle Switches POLES & CIRCUITS Toggle Position ) = Momentary ( Up Center Connected Terminals Down Up Center Throw & Schematics Down Note: Slot Pole Model SP B12 B13 B15 B18 B19 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 B22 B23 B25 B28 B29 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 DP Terminal numbers are not actually on the switch. Slot 2 (COM) OPEN 2-1 SPDT 1 OPEN 2-1 5-4 2 DPDT 1 3 5 (COM) 3 6 4 For 3 Throw (3-On) Connected Terminals External Connection Pole Model Down Center Up SP B24 ON ON ON External Connection 2 (in) 1 (out) 3 4 (out) 2 (in) 6 (out) 2-3 5-6 1 (out) 3 2 (in) 5 4 (out) 1 (out) 6 (out) 2-3 5-4 3 5 4 (out) 6 (out) 2-1 5-4 (out) (out) External Connection External Connection 5 The SP3T model utilizes a double pole base. External connections must be made during field installation. Common (in) 1 4 2 5 3 6 External Conn (out) TOGGLES Standard Material & Finish: Brass with Bright Nickel A J .394" Bat E .248" Bat .394" Flatted 26° 26° (2.6) Dia .102 (2.6) Dia .102 (10.0) .394 H (10.0) .394 (6.3) .248 K .248" Flatted (2.7) .106 (1.6) .063 26° L Snap Top for Paddles Locking Lever 26° 26° (1.6) .063 (6.3) .248 (4.5) Dia .177 (5.1) Dia .201 26° (2.6) .102 (2.5) .098 (5.0) .197 (12.5) .492 (11.5) .453 (5.9) .232 NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 (5.8) Dia .228 www.nkkswitches.com 8-01 Series B Washable Subminiature Antistatic Toggle Switches PC TERMINALS Use of a support bracket or placement of the round bushing in a panel cutout is recommended to increase PCB mounting stability. P B Straight H Straight with Bracket Right Angle with Bracket (10.16) .400 (2.54) Typ .100 (5.08) .200 (5.08) .200 (0.6) Typ .024 (0.6) Dia Typ .024 (5.08) .200 (2.54) Typ .100 (0.6) .024 (0.4) .016 (0.5) Typ .020 (3.1) .122 (3.1) Typ .122 V (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.4) Typ .016 W Vertical with Bracket Straight Long (2.54) Typ .100 (0.6) Dia Typ .024 (5.08) .200 (0.5) Typ .020 (0.6) Dia Typ .024 (18.9) .744 (2.54) Typ .100 (0.6) .024 (0.4) .016 OPTIONAL CAPS G AT4003 .394" Bat Lever Cap J 26° (3.0) Dia .118 Material: PVC (11.0) .433 Colors Available: A, B, C AT4064 .248" Bat Lever Cap 26° Material: PVC (3.0) Dia .118 Colors Available: A, B, C (10.0) .394 (7.0) .276 (6.3) .248 PADDLES A AT467 Short Paddle B AT468 Long Paddle 26° 26° (5.0) .197 (2.4) .094 Material: PBT (10.3) .406 (9.4) .370 Colors Available: A, B, C, E, F, G, H Color Codes: A (4.4) .173 (2.4) .094 (4.6) .181 (15.1) .594 Material: PBT (14.2) .559 (4.8) Dia .189 Colors Available: A, B, C, E, F, G, H Black B White C Red E Yellow F Green NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 G Blue H Gray www.nkkswitches.com 8-01 Series B Washable Subminiature Antistatic Toggle Switches TYPICAL SWITCH DIMENSIONS Straight PC Single Pole (2.6) Dia .102 (6.0) Dia .236 (0.6) Dia Typ .024 26° 2 3 Slot (3.5) .138 (10.0) .394 (6.8) .268 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 (1.0) .039 1 1 (8.8) .346 2 3 (1.0) .039 CL (2.54) Typ .100 (0.8) Dia Typ .031 CL B12AP Straight PC Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.6) Dia Typ .024 26° Slot (3.5) .138 (10.0) .394 (8.8) .346 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 (5.08) .200 4 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) Typ .100 (3.1) .122 (5.08) .200 B22AP Straight PC • Bracket Single Pole (6.0) Dia .236 (2.6) Dia .102 (0.4) Typ .016 1 (10.16) .400 26° Slot (0.6) Typ .024 (0.6) Dia Typ .024 (6.0) .236 (8.0) .315 (2.7) .106 (10.0) .394 (0.8) .031 (13.1) .516 2 3 (2.54) Typ .100 (3.1) .122 (1.0) .039 1 (8.8) .346 (2.54) Typ .100 2 3 (1.0) .039 (2.54) .100 CL CL (0.8) Dia Typ .031 (2.54) .100 B12AB Straight PC • Bracket Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.4) Typ .016 B22AB (6.0) .236 (8.8) .346 (2.7) .106 (10.0) .394 Right Angle PC (5.08) .200 (10.16) .400 26° Slot (0.6) Dia Typ .024 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 (0.6) Typ .024 (5.08) .200 (2.54) Typ .100 (3.1) .122 4 Single Pole (6.0) Dia .236 (3.4) .134 (2.6) Dia .102 3 Slot (0.6) Typ .024 (5.08) .200 (2.7) .106 (10.0) .394 (0.4) .016 (13.9) .546 (3.1) .122 (5.08) .200 2 (8.8) .346 1 (2.54) Typ .100 (7.3) .287 1 2 3 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 B12AH NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 www.nkkswitches.com 8-01 Series B Washable Subminiature Antistatic Toggle Switches TYPICAL SWITCH DIMENSIONS Right Angle PC Double Pole (2.6) Dia .102 (6.0) Dia .236 3 (3.1) .122 Slot (0.6) Typ .024 (5.08) .200 B22AH (0.4) .016 (2.7) .106 (10.0) .394 (8.8) .346 Vertical PC (4.4) .173 (2.54) .100 (5.08) .200 (16.4) .646 2 6 1 5 4 (8.8) .346 1 2 (2.54) Typ .100 (2.54) 3 .100 4 5 6 (5.08) .200 (0.8) Dia Typ .031 (0.5) .020 (0.6) Dia Typ .024 (2.54) Typ .100 Single Pole (6.0) Dia .236 (2.6) Dia .102 (1.0) .039 (2.54) Typ .100 1 1 26° Slot (0.6) Typ .024 (2.54) .200 B12AV (1.0) .039 (2.7) .106 (8.0) .315 (10.0) .394 Vertical PC (0.4) .016 (5.08) .200 2 (4.4) .173 3 (0.5) (3.1) .020 .122 (2.54) Typ .100 (18.9) .746 (8.8) .346 2 3 (5.08) .200 (0.8) Dia Typ .031 (2.54) CL .100 (0.6) Dia Typ .024 (1.0) .039 CL Double Pole (2.6) Dia .102 (6.0) Dia .236 26° (2.7) .106 Slot (0.6) Typ .024 (5.08) .200 B22AV (1.0) .039 (8.8) .346 (10.0) .394 Locking Lever • Straight PC • Bracket (0.4) .016 (5.08) .200 4 2 5 3 6 (8.8) .346 (18.9) .746 5 2 6 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.5) (3.1) .020 .122 (2.54) Typ .100 (4.5) Dia (5.1) Dia .177 .201 (0.4) Typ .016 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (5.08) .200 (5.8) .228 (11.5) .453 (12.5) .492 Slot (8.0) .315 B12LB Locking Lever • Straight PC • Bracket (0.6) Typ .024 (0.6) Dia Typ .024 1 (10.16) .400 26° (5.5) .217 (0.8) .031 (15.5) .610 2 3 (2.54) Typ .100 (3.1) .122 CL (1.0) .039 1 (8.8) .346 (1.0) .039 (2.54) .100 (2.54) Typ .100 2 3 CL (0.8) Dia Typ .031 (2.54) .100 Double Pole (6.0) Dia .236 (4.5) Dia (5.1) Dia .177 .201 (0.4) Typ .016 (0.6) Dia Typ .024 (10.16) .400 26° (5.68) .224 (8.85) .348 1 1 Single Pole (6.0) .236 Slot (4.4) .173 4 (5.8) .228 (11.5) .453 (12.5) .492 (5.5) .217 (0.8) .031 (15.5) .610 (5.08) .200 1 4 2 5 3 6 (2.54) Typ .100 (3.1) .122 (8.8) .346 (0.6) Typ .024 (5.08) .200 4 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 B22LB NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 www.nkkswitches.com 8-01