BB26AH-HC

Process Sealed Subminiature Antistatic Pushbuttons Series BB Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Available in momentary and maintained circuits. Industry’s smallest alternate action (maintained) pushbutton with latchdown feature providing visible, audible, and tactile feedback. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator’s touch travels from the actuator through the bushing and bracket to the PC board. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Smooth, 6mm diameter bushing simplifies panel layout. Totally sealed body construction prevents contact contamination and allows time- and money-saving soldering and cleaning. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grids. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Pushbuttons Series BB General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum (momentary) 25,000 operations minimum (alternate action) 50,000 operations minimum (momentary) 25,000 operations minimum (alternate action) 2.55N (momentary); 2.94N (alternate action) Nonshorting Momentary: Pretravel .028” (0.7mm); Overtravel .016” (0.4mm); Total Travel .043” (1.1mm) Alternate: Pretravel .039” (1.0mm); Overtravel .039” (1.0mm); Total Travel .079” (2.0mm) Materials & Finishes Plunger: Bushing: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Polyacetal Carbon blended polyamide Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Copper alloy with gold plating Copper alloy with gold plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Cap Installation Force: 49.03N (11.2 lbf) maximum downward force on actuator; actuator must be in UP position to remove cap from alternate action models PCB Processing Soldering: Cleaning: Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: UL94V-0 available The BB Series pushbuttons have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Process Sealed Subminiature Antistatic Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE Series BB A BB POLES 1 2 SPDT DPDT 1 5 A H F PC TERMINALS P *B *H *V W Straight Straight with Bracket Right Angle with Bracket Vertical with Bracket Straight Long CIRCUITS 5 6 ON ON (ON) ON ( ) = Momentary Alternate Action has Latchdown. BB16 has a Double Pole case. *Bracketed models are ESD protected CAP COLORS CAPS PLUNGER A .213” (5.4mm) Long F H .201” (5.1mm) Diameter .295” (7.5mm) Diameter A B C Black White Red DESCRIPTION FOR TYPICAL ORDERING EXAMPLE BB15AH-FA SPDT ON-(ON) Circuit Right Angle PC Terminals Black .201” (5.1mm) Diameter Cap .213” (5.4mm) Long White Plunger N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Pushbuttons POLES & CIRCUITS Plunger Position ( ) = Momentary Normal Pole SP DP Model BB15 BB16 BB25 BB26 ON ON ON ON (ON) ON (ON) ON 2-3 2-3 5-6 2-1 2-1 5-4 SPDT DPDT Down Connected Terminals Normal Down Note: Series BB Throw & Schematics Terminal numbers are not actually on the switch. 2 (COM) 1 2 1 (COM) 3 4 3 5 6 PLUNGERS A .213” (5.4mm) Long Normal Position (2.8) Dia .110 (5.4) .213 (2.8) Dia .110 Standard Plunger Color: White Contact factory for other colors and lengths. Latchdown Position (4.2) .165 PC TERMINALS Use of a support bracket is recommended to increase PCB mounting strength and stability. (10.16) .400 (5.08) .200 (5.08) .200 (0.6) Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.4) Typ .016 (3.1) .122 Both single pole and double pole alternate action models have double pole bases. See Typical Switch Dimensions for details. P Straight (2.54) Typ .100 (5.08) .200 B (0.6) Dia Typ .024 Straight with Bracket (3.1) Typ .122 H Right Angle with Bracket (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) .024 (0.4) .016 (0.5) Typ .020 V Vertical with Bracket (0.5) Typ .020 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) .024 (0.4) .016 W Straight Long (5.08) .200 (2.54) Typ .100 (0.6) Dia Typ .024 (18.9) .744 SLIP-ON CAPS F AT475 .201” (5.1mm) Diameter Cap (2.8) Dia .110 (4.0) .157 H (5.1) Dia .201 (6.3) (5.4) .248 .213 AT496 .295” (7.5mm) Diameter Cap (7.5) Dia .295 (6.3) (5.4) .248 .213 (2.8) Dia .110 (4.0) .157 Material: Polyamide Material: Polyamide Colors Available: A Black B White C Red 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Process Sealed Subminiature Antistatic Pushbuttons TYPICAL SWITCH DIMENSIONS Straight PC (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (3.5) .138 (0.6) Dia Typ .024 1 2 COM 3 Series BB Single Pole 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (8.8) .346 (1.0) .039 2 3 Slot (6.8) .268 (2.8) Dia .110 (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 C L C L BB15AP-FA Momentary Straight PC Double Pole 1 COM 2 3 4 5 6 BB16AP 1 COM 2 3 (8.8) .346 (8.8) .346 (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (3.5) .138 (0.6) Dia Typ .024 (5.08) .200 Slot (8.8) .346 (2.8) Dia .110 (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 (5.08) .200 (2.54) .100 (2.54) .100 (2.54) Typ .100 C L (0.8) Dia Typ .031 4 5 6 1 2 3 1 2 3 (2.54) Typ .100 (0.8) Dia Typ .031 BB25AP-FA Momentary & Alternate Alternate Straight PC • Bracket (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (2.7) (0.4) Typ .106 .016 (0.6) Dia Typ .024 (10.16) .400 Slot (2.8) Dia .110 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 Single Pole (0.6) Typ .024 1 2 COM 3 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 (8.8) .346 2 3 (6.0) .236 (8.0) .315 (5.4) .213 (6.3) .248 C L (1.0) .039 (2.54) .100 C L BB15AB-FA Momentary Straight PC • Bracket Double Pole 1 COM 2 3 4 5 6 BB16AB 1 COM 2 3 (8.8) .346 (0.6) Typ .024 (5.08) .200 (8.8) .346 (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (2.7) (0.4) Typ .106 .016 (0.6) Dia Typ .024 (10.16) .400 (0.6) Typ .024 (2.54) .100 Slot (6.0) .236 (8.8) .346 (2.8) Dia .110 (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (2.54) Typ .100 (3.1) .122 (5.08) .200 4 5 6 1 2 3 (2.54) Typ .100 1 2 3 (2.54) Typ .100 (2.54) Typ .100 (0.8) Dia Typ .031 (0.8) Dia Typ .031 C L BB25AB-FA Momentary & Alternate Alternate 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Process Sealed Subminiature Antistatic Pushbuttons TYPICAL SWITCH DIMENSIONS Right Angle PC (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (2.7) .106 (3.4) .134 3 Series BB Single Pole COM 2 1 (7.3) .287 (0.6) Dia Typ .024 (2.54) Typ .100 1 2 3 (2.54) Typ .100 (5.08) .200 (2.8) Dia .110 (0.6) Typ .024 (5.08) .200 Slot (5.4) .213 (6.3) .248 (0.4) .016 (13.9) .546 (3.1) .122 (5.08) .200 (0.8) Dia Typ .031 BB15AH-FA (8.8) .346 Momentary Right Angle PC Double Pole COM 3 6 2 5 1 4 BB16AH COM (8.8) .346 3 2 1 (8.8) .346 (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) Typ .100 (2.54) 3 .100 6 1 2 3 (0.6) Typ .024 (5.08) .200 (8.8) .346 (2.8) Dia .110 (3.1) .122 Slot (5.4) .213 (2.7) .106 (6.3) .248 (0.4) .016 (16.4) .646 (2.54) .100 (5.08) .200 (4.4) .173 (0.5) .020 1 4 2 5 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) Typ .100 (5.08) .200 (5.08) .200 (0.8) Dia Typ .031 (0.8) Dia Typ .031 BB25AH-FA Momentary & Alternate Alternate Vertical PC (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (2.7) .106 Single Pole (1.0) .039 1 2 1 Slot (0.6) Typ .024 (2.54) .100 (2.8) Dia .110 (5.4) .213 (8.0) .315 (6.3) .248 (0.4) .016 (5.08) .200 (1.0) .039 (4.4) .173 COM 3 (8.8) .346 (2.54) Typ .100 2 3 BB15AV-FA (18.9) .746 (0.5) (3.1) .020 .122 (2.54) Typ .100 C L (0.6) Dia Typ .024 (1.0) .039 (5.08) .200 (0.8) Dia Typ .031 C (2.54) L .100 Momentary Vertical PC Double Pole 1 COM 2 3 4 5 6 BB16AV 1 COM 2 3 (8.8) .346 (8.8) .346 (6.0) Dia .236 (5.1) Dia .201 (4.0) .157 (2.7) .106 (1.0) .039 Slot (0.6) Typ .024 (5.08) .200 (2.8) Dia .110 (5.4) .213 (6.3) .248 (0.4) .016 (5.08) .200 (4.4) .173 (0.6) Dia Typ .024 (5.08) .200 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.8) Dia Typ .031 C L (0.6) Dia Typ .024 (2.54) .100 (8.8) .346 (18.9) .746 (0.5) (3.1) .020 .122 (2.54) Typ .100 4 5 6 1 2 3 1 2 3 (2.54) Typ .100 (2.54) Typ (5.08) .100 .200 (0.8) Dia Typ .031 BB25AV-FA Momentary & Alternate Alternate 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com