EB2011G-C-J21A

Toggles Series EB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): C 3A @ 125V AC for silver contacts 0.4VA maximum @ 28V AC/DC maximum for gold contacts (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Travel: Keylocks Programmable Illuminated PB Light Touch Miniature Pushbuttons 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts and case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Single Pole: 1.75N for Momentary and 2.49N for Alternate Action Double Pole: 2.30N for Momentary and 3.05N for Alternate Action Momentary: Pretravel .047” (1.2mm); Overtravel .016” (0.4mm); Total Travel .063” (1.6mm) Alternate: Pretravel .071” (1.8mm); Overtravel .016” (0.4mm); Total Travel .087” (2.2mm) Materials & Finishes Slides Rotaries Plunger: Bushing: Frame: Case: Movable Contacts: Stationary Contacts: Terminals: Brass with nickel plating Brass with nickel plating Stainless steel Melamine phenolic resin (UL94V-0) Copper with silver or gold plating Silver & copper with silver or gold plating Copper with silver or gold plating Tactiles Environmental Data Operating Temp Range: Humidity: Vibration: Tilt Shock: –10°C through +70°C (+14°F through +158°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Touch Mounting Torque: Cap Installation Force: Soldering Time & Temp: Standards & Certifications Flammability Standards: UL94V-0 case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” before first dash in part number to order UL recognized switch. All single and double pole models recognized at 3A @ 125V AC. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” before first dash in part number to order CSA certified switch. Single pole solder lug and PC models certified at 3A @ 125V AC; double pole PC models certified at 3A @ 125V AC. Supplement Accessories Indicators Cleaning: 1.47Nm (13.0 lb • in) for double nut; 0.68Nm (6.0 lb • in) for single nut 78.5N (17.65 lbf) maximum downward force on actuator Wave Solder (Straight PC): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. C24 www.nkkswitches.com 11/10/20 Toggles Series EB Rockers Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Bushing and snap-in mount versions available; snap-in models offer many style and color choices to enhance front panel appearance. Programmable Illuminated PB C Pushbuttons Light Touch Miniature Pushbuttons Light touch actuation. High torque bushing prevents rotation and separation from metal frame during installation. Keylocks Stainless steel frame resists corrosion. Case of heat resistant resin meets UL 94V-0 flammability rating. Rotaries Higher insulating barriers protect against crossover in double pole devices. Slides 1,500V dielectric strength between contacts and case is accomplished by clinching the frame away from the terminals. Tilt Tactiles Epoxy sealed terminals prevent entry of solder flux and other contaminants. Snap-in Mount Page C30 Accessories Page C26 Supplement Bushing Mount Indicators Touch Actual Size www.nkkswitches.com C25 Series EB Toggles Light Touch Miniature Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE 65 B F C Poles & Circuits Programmable Illuminated PB Pushbuttons Rockers EB20 Caps 11 SPDT ON (ON) B .315” (8.0mm) Dia. 65 SPDT ON ON C .394” (10.0mm) Dia. 61 DPDT ON (ON) 85 DPDT ON ON ( ) = Momentary Silver Contacts; Solder Lug Terminals 3A @ 125V AC A Black B White G Gold Contacts; Solder Lug Terminals 0.4VA max @ 28V AC/DC max C Red Silver Contacts; Straight PC Terminals; 3A @ 125V AC E Yellow P F Green G Blue H Gray Rotaries Keylocks No Code Slides PG Gold Contacts; Straight PC Terminals 0.4VA max @ 28V AC/DC max IMPORTANT: Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch EB2065-BF Indicators Green .315” (8.0mm) Diameter Cap Accessories SPDT ON-ON Circuit Supplement Silver Contacts & Solder Lug Terminals with 3-Amp Rating C26 Colors Contacts, Ratings, & Terminals www.nkkswitches.com Series EB Toggles Light Touch Miniature Pushbuttons POLES & CIRCUITS Normal Down Note: Terminal numbers are not actually on the switch. Pole Model SP EB2011 EB2065 ON ON (ON) ON 2-3 2-1 SPDT DP EB2061 EB2085 ON ON (ON) ON 2-3 5-6 2-1 5-4 DPDT Keyway Rockers Down Throw & Switch Schematics Keyway 2 (COM) 3 2 C 1 (COM) 3 1 5 6 4 CONTACT MATERIALS, RATINGS, & TERMINALS Solder Lug Silver Contacts Power Level 3A @ 125V AC G Solder Lug Gold Contacts Logic Level 0.4VA max @ 28V AC/DC max Rotaries Keylocks No Code Pushbuttons Normal Connected Terminals Programmable Illuminated PB Plunger Position ( ) = Momentary Complete explanation of operating range in Supplement section. Slides (2.0) .079 Epoxy Seal (2.0) .079 Tactiles (4.0) (1.1) .157 .043 Thk (0.7) (0.5) Com .028 .020 Straight PC Silver Contacts Power Level PG Straight PC Gold Contacts Logic Level 3A @ 125V AC Tilt P Touch 0.4VA max @ 28V AC/DC max Indicators Complete explanation of operating range in Supplement section. PCB Footprints Single Pole (6.4) (4.3) .252 .169 Double Pole (1.2) .047 Thk (0.7) (0.5) Com .028 .020 2 (3.9) Typ .154 1 (1.8) Dia Typ .071 www.nkkswitches.com 3 6 2 5 1 4 Accessories (4.7) .185 3 (3.9) Typ .154 (1.8) Dia Typ .071 Supplement Epoxy Seal C27 Series EB Toggles Light Touch Miniature Pushbuttons CAPS & COLORS AT443 .315” (8.0mm) Diameter Snap-on Cap C Cap Colors Available: A C B AT442 .394” (10.0mm) Diameter Snap-on Cap Cap Colors Available: F Black White G C Red H E Yellow A Green (7.6) .299 (8.0) Dia .315 Gray Black F Green B White G Blue C Red H Gray E Yellow Blue Cap Material: Polycarbonate Finish: Glossy (8.0) .315 (10.0) Dia .394 Cap Material: Polycarbonate Finish: Glossy Plunger Extension Due to a difference in plunger lengths on the momentary and alternate action models, cap distance from top of bushing varies. Keylocks Programmable Illuminated PB Pushbuttons Rockers B (2.3) Dia .091 (2.3) Dia .091 (2.85) Dia .112 (8.0) .315 (3.3) Dia .130 Rotaries (2.5) .098 (2.7) .106 Momentary Cap Location Slides (9.3) .366 (1.2) .047 (1.4) .055 Momentary Plunger Length (2.85) Dia .112 Alternate Plunger Length Alternate Cap Location TYPICAL SWITCH DIMENSIONS Tactiles Solder Lug Single Pole M6 P0.75 Keyway (8.0) Dia .315 (1.4) .055 (7.6) .299 Touch (7.0) .276 3 COM 2 (0.5) .020 Tilt (11.0) .433 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 (4.5) (6.8) .177 .268 (8.5) (18.0) .335 .709 For Momentary Devices 1 (4.0) Typ .157 (2.0) Typ .079 EB2011-BA Indicators Solder Lug Double Pole Keyway M6 P0.75 Accessories (11.0) .433 (8.0) Dia .315 Supplement (11.7) .461 (0.5) .020 (1.4) .055 (7.6) .299 (4.5) (6.8) .177 .268 (8.5) (18.0) .335 .709 For Momentary Devices EB2061-BA C28 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 www.nkkswitches.com COM 6 3 5 2 4 1 (4.0) Typ .157 (4.7) .185 (2.0) Typ .079 Series EB Toggles Light Touch Miniature Pushbuttons HARDWARE Face Nut Lockwasher AT513M Metric Hexagon Nut AT509 Lockwasher AT507M Metric Locking Ring Material: Brass with Nickel Plating Material: Steel with Zinc/Chromate Material: Steel with Zinc/Chromate Locking Ring (Optional) Lock Nut C (6.0) Dia .236 M6 P0.75 Optional Hardware: AT507M Metric Locking Ring Rockers 2 AT513M Metric Hexagon Nuts 1 AT509 Internal Tooth Lockwasher Optional Hardware (8.0) .315 (6.4) Dia (10.2) Dia .252 .402 (12.0) Dia .472 (2.0) .079 (5.5) .217 (9.0) .354 (0.5) .020 (1.5) .059 (1.7) .067 (0.8) .031 Keylocks Note: Cap must be snapped on after the switch is mounted into the panel. PANEL CUTOUTS & THICKNESSES (5.6) .220 M6 P0.75 (1.7) .067 (6.35) Dia .250 (0.6) .024 Maximum Effective Panel Thickness: .118” (3.0mm) (6.5) Dia .256 (2.2) Dia .087 Rotaries (6.5) .256 Maximum Effective Panel Thickness: .055” (1.4mm) Maximum Effective Panel Thickness: .185” (4.7mm) Indicators Touch Tilt See Accessories & Hardware section for optional Conical Nuts: AT512M used with cap AT443 and AT512CM used with cap AT442. Accessories (2.5) .098 (8.5) .335 (6.35) Dia .250 Supplement (0.8) .031 Without Bottom Hex Nut Slides (8.0) Dia .315 With Standard Hardware & Optional Locking Ring Tactiles With Standard Hardware Metric Bushing Pushbuttons Standard Hardware Programmable Illuminated PB Installation/Assembly www.nkkswitches.com C29 Toggles Series EB TYPICAL SWITCH Pushbuttons Rockers EB20 11 B J23 C Contacts, Ratings, & Terminals Poles & Circuits 11 SPDT ON (ON) 65 SPDT ON ON 61 DPDT ON (ON) 85 DPDT ON ON ( ) = Momentary No Code Silver Contacts; Solder Lug Terminals 3A @ 125V AC Cap Colors A Black White G Gold Contacts; Solder Lug Terminals 0.4VA max @ 28V AC/DC max B C Red Silver Contacts; Straight PC Terminals; 3A @ 125V AC E Yellow P F Green PG Gold Contacts; Straight PC Terminals 0.4VA max @ 28V AC/DC max G Blue H Gray Rotaries Keylocks Programmable Illuminated PB Light Touch Miniature Pushbuttons Cap Extensions & Bezel Types Slides Low Rise IMPORTANT: Momentary Alternate Momentary Alternate J20 J30 J40 J50 Without Bezel J21 J31 J41 J51 Bezel without LED J22 J32 J42 J52 Bezel with 1 Round LED J23 J33 J43 J53 Bezel with 2 Round LEDs J24 J34 J44 J54 Bezel with 2 Rectangular LEDs Description Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. High Rise DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITHOUT BEZEL Indicators Without Bezel Accessories Touch EB2011-A-J40 SPDT ON-(ON) Circuit Black Cap with High Rise Extension Supplement Silver Contacts & Solder Lug Terminals with 3-Amp Rating C30 www.nkkswitches.com Series EB Toggles Light Touch Miniature Pushbuttons ORDERING EXAMPLES Rockers C F C Led Colors Programmable Illuminated PB Bezel Colors Bezel without LEDs A Black F Green B White G Blue C Red H Gray E Yellow Bezel with 1 Round LED Black C Red F Green Bezel with 2 Round or Rectangular LEDs Top LED Black Rotaries 2 LEDs Bottom LED C Red C Red E Yellow E Yellow F Green F Green Tilt Tactiles A Keylocks 1 LED Slides A Pushbuttons A DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITH BEZEL Black Bezel with 2 Round LEDs: Top LED Red Bottom LED Green Touch EB2011-B-J23ACF Accessories Indicators White Cap with Low Rise Extension SPDT ON-(ON) Circuit Supplement Silver Contacts & Solder Lug Terminals with 3-Amp Rating www.nkkswitches.com C31 Series EB Toggles Light Touch Miniature Pushbuttons POLES & CIRCUITS Normal Normal Throw & Switch Schematics Down Note: Terminal numbers are not actually on the switch. Model SP EB2011 EB2065 ON ON (ON) ON 2-3 2-1 SPDT DP EB2061 EB2085 ON ON (ON) ON 2-3 5-6 2-1 5-4 DPDT C Keyway Keyway 2 (COM) 3 1 2 3 (COM) 1 5 6 4 CONTACT MATERIALS, RATINGS, & TERMINALS Rotaries No Code Solder Lug Silver Contacts Power Level 3A @ 125V AC G Solder Lug Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum Slides Complete explanation of operating range in Supplement section. Epoxy Seal (2.0) .079 (2.0) .079 Tactiles (4.0) (1.1) .157 .043 Thk (0.7) (0.5) Com .028 .020 P Straight PC Silver Contacts PG Straight PC Gold Contacts Tilt Touch Down Connected Terminals Pole Keylocks Programmable Illuminated PB Pushbuttons Rockers Plunger Position ( ) = Momentary Power Level 3A @ 125V AC Logic Level 0.4VA maximum @ 28V AC/DC maximum Indicators Complete explanation of operating range in Supplement section. PCB Footprints Accessories Single Pole Epoxy Seal (6.4) (4.3) .252 .169 (4.7) .185 3 Supplement (1.2) .047 Thk (0.7) (0.5) Com .028 .020 C32 Double Pole 2 (3.9) Typ .154 1 (1.8) Dia Typ .071 www.nkkswitches.com 3 6 2 5 1 4 (3.9) Typ .154 (1.8) Dia Typ .071 Series EB Toggles Light Touch Miniature Pushbuttons CAP COLORS C Red E G Blue H Gray Yellow Rockers Green White CAP EXTENSIONS & BEZEL TYPES Low Rise Momentary (4.5) .177 (2.8) .110 Low Rise Alternate (11.5) Sq .453 (18.0) .709 (3.3) .130 (11.0) .433 (4.5) .177 (7.0) .276 (18.0) .709 For Momentary Devices High Rise Cap Extension with Bezel (10.0) .394 Low Rise Momentary (4.5) .177 AT207 Bezel without LED E Black B White G Blue C Red H Gray Green (12.5) .492 (2.0) Typ .079 Maximum Panel Thickness .039” ~ .157” (1.0mm ~ 4.0mm) Cutout applies to SP & DP (2.2) .087 (10.0) .394 Low Rise Alternate (4.5) .177 (2.8) .110 (2.1) .083 (2.2) .087 J41 (10.0) .394 High Rise Momentary (3.4) .134 (2.8) .110 EB2011-A-J40 (3.2) .126 (2.2) .087 J51 (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (11.8) .465 Yellow F A (2.8) .110 (2.1) .083 J31 (2.8) .110 (3.4) .134 (15.0) .591 (14.0) .551 Single Pole (1.0) .039 (2.2) .087 J21 (11.0) .433 1 (4.0) Typ .157 (2.8) .110 (11.0) .433 High Rise Alternate Material: Polycarbonate (15.0) .591 (2.2) .087 (12.0) .472 (15.6) .614 Finish: Glossy Tilt (12.2) .480 2 (0.5) .020 (2.8) .110 (3.4) .134 (3.4) .134 3 COM J50 (11.0) .433 High Rise Momentary (2.8) .110 (4.5) .177 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 Part No. J40 (11.0) .433 C (4.4) .173 Keylocks J30 (11.0) .433 (3.3) .130 Rotaries J20 (3.3) .130 Tactiles (2.2) .087 (12.5) .492 (21.5) .846 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP Touch Cap Extension without Bezel Pushbuttons F B Programmable Illuminated PB Black Slides A Factory Assembled on the Switch: Square snap-on cap AT465, snap-in mounter AT529, and optional bezels which follow. (0.5) .020 (21.5) .846 (15.6) .614 COM (1.0) .039 (2.2) .087 (10.0) .394 Low Rise (2.8) .110 (4.5) .177 (4.5) .177 6 3 5 2 4 1 (4.0) Typ .157 (4.7) .185 (18.0) .709 For Momentary Devices (11.0) .433 (14.0) .551 (2.0) Typ .079 Double Pole www.nkkswitches.com Accessories (11.5) Sq .453 EB2061-B-J21A C33 Supplement (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 Indicators Part No. Series EB Toggles Light Touch Miniature Pushbuttons CAP EXTENSIONS & BEZEL TYPES C (1.0) .039 (2.2) .087 J22 Low Rise Momentary AT208 Bezel with 1 Round LED (AT070 LED) A (10.0) .394 (11.8) .465 (19.0) .748 (13.5) .531 Black (6.25) .246 (2.2) .087 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (12.0) .472 Material: Polycarbonate Finish: Glossy (15.6) .614 (30.2) 1.19 (5.4) Dia .213 (5.4) Dia .213 (19.0) .748 (2.5) .098 (0.61) Sq .024 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 3 (3.9) Typ .154 COM Rotaries Slides Tactiles EB2011-B-J42AC 1 Cap Extension with Bezel (1.0) .039 (2.2) .087 J23 (4.5) .177 (2.1) .083 J33 (10.0) .394 Low Rise Momentary (2.2) .087 (10.0) .394 Low Rise Alternate (2.8) .110 (18.0) .709 For Momentary Devices (7.0) .276 (4.5) .177 (2.8) .110 (2.0) .079 Single Pole (2.1) .083 (2.2) .087 J43 (3.4) .134 (3.2) .126 (2.2) .087 J53 (10.0) .394 High Rise Momentary (12.0) .472 (10.0) .394 Tilt A (4.0) Typ .157 (4.5) .177 High Rise AT212 Bezel with 2 Round LEDs (AT617 LEDs) (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (2.8) .110 (15.0) .591 (2.2) .087 Black Material: Polycarbonate Finish: Glossy Indicators Touch (2.1) .083 (15.6) .614 (2.8) .110 (3.4) .134 (2.2) .087 (10.0) .394 (11.0) .433 (14.0) .551 2 (0.5) .020 (11.8) .465 LED colors and specifications on next to last page of this EB section. (15.0) .591 (11.5) Sq .453 (12.0) .472 (2.8) .110 (8.8) Dia .346 (13.8) .543 (30.2) 1.190 (13.5) .531 (3.4) .134 (12.5) .492 (15.3) Min .602 (4.9) .193 (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (3.2) .126 (2.2) .087 J52 (10.0) .394 High Rise Momentary (2.8) .110 (4.5) .177 (2.1) .083 (2.2) .087 J42 (2.2) .087 Low Rise Alternate (2.8) .110 (4.5) .177 (2.1) .083 J32 (10.0) .394 Keylocks Programmable Illuminated PB Pushbuttons Rockers Cap Extension with Bezel (8.0) .315 (10.0) .394 (7.8) .307 (11.8) .465 (21.5) Sq .846 (3.0) Dia Typ .118 LED colors and specifications on next to last page of this EB section. (18.4) .724 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (1.1) x (2.0) Typ .043 x .079 (7.8) .307 (0.7) Typ .028 3 Supplement Accessories (8.0) .315 (12.0) .472 (3.9) Typ .154 (11.5) Sq .453 (0.5) .020 (3.0) Dia Typ .118 (11.8) .465 (21.5) Sq .846 EB2065-B-J33ACF C34 (2.1) .083 (2.2) .087 (10.0) .394 Low Rise www.nkkswitches.com (2.8) .110 (4.5) .177 (4.5) .177 (18.0) .709 For Alternate Devices COM (11.0) .433 2 1 (4.0) Typ .157 (7.0) .276 (2.0) Typ .079 Single Pole (14.0) .551 Series EB Toggles Light Touch Miniature Pushbuttons CAP EXTENSIONS & BEZEL TYPES (10.0) .394 Low Rise Momentary (4.5) .177 (2.8) .110 J34 (10.0) .394 Low Rise Alternate (4.5) .177 (2.1) .083 (2.2) .087 J44 (2.2) .087 (10.0) .394 High Rise Momentary (2.8) .110 (3.4) .134 (2.8) .110 (3.2) .126 (2.2) .087 J54 High Rise Alternate (10.0) .394 (2.8) .110 (3.4) .134 AT213 Bezel with 2 Rectangular LEDs (AT618 LEDs) C (10.0) .394 Black (15.0) .591 (2.0) Typ .079 Material: Polycarbonate Finish: Glossy (10.0) .394 (12.0) .472 (8.0) .315 (2.2) .087 (7.8) .307 (11.8) .465 (18.4) .724 (7.8) .307 LED colors and specifications on next page of this EB section. Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (21.5) Sq .846 (5.0) Typ .197 Programmable Illuminated PB A (1.1) x (2.0) Typ .043 x .079 (0.5) .020 (5.0) Typ .197 (2.8) .110 (3.4) .134 (4.5) .177 2 4 1 (4.0) Typ .157 (18.0) .709 For Alternate Devices (2.0) Typ .079 Double Pole EB2085-B-J54ACF Tilt Tactiles High Rise (4.7) .185 (11.0) .433 (14.0) .551 Touch (3.2) .126 (2.2) .087 (10.0) .394 3 5 Indicators (11.8) .465 (21.5) Sq .846 6 Accessories (2.0) .079 COM Rotaries (3.9) Typ .154 (11.5) Sq .453 Supplement (12.0) .472 Keylocks (0.7) Typ .028 (8.0) .315 Rockers J24 (2.1) .083 Pushbuttons (1.0) .039 (2.2) .087 Slides Cap Extension with Bezel www.nkkswitches.com C35 Series EB Toggles Light Touch Miniature Pushbuttons LED COLORS & SPECIFICATIONS AT070 LED For Bezel AT208 with 1 LED (+) AT617 LED For Bezel AT212 with 2 Round LEDs (-) (7.0) .276 Bottom LED (+) (-) Circuit Mark This Side Top LED Circuit Mark This Side Circuit Mark This Side Top LED Bottom LED (+) (-) Keylocks Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). AT070 (+) (-) AT617 AT618 C F C E F C E F Color Red Green Red Yellow Green Red Yellow Green Maximum Forward Current IFM 25mA 30mA 30mA 30mA 30mA 25mA 30mA 25mA Typical Forward Current IF 20mA 20mA 20mA 20mA 20mA 20mA 20mA 20mA Forward Voltage VF 2.8V 2.1V 2.1V 2.1V 2.2V 2.25V 2.1V 2.2V Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.33 mA/°C 0.40 mA/°C 0.40 mA/°C 0.40 mA/°C 040 mA/°C 0.33 mA/°C 0.40 mA/°C 0.33 mA/°C Rotaries Slides Tactiles (5.0) .197 (5.3) .209 Ambient Temperature Range (when used with a bezel) –10° ~ +70°C –15° ~ +70°C –25° ~ +50°C The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is independent of switch operation. LED is colored in OFF state. Touch Tilt AT618 LED For Bezel AT213 with 2 Rectangular LEDs (3.7) .146 C Programmable Illuminated PB Pushbuttons Rockers Bezel Orientation on Switch Supplement Accessories Indicators If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp. The ballast resistor calculation and more lamp detail are shown in the Supplement section. C36 www.nkkswitches.com Series EB Toggles Light Touch Miniature Pushbuttons LEGENDS Screen Print or Pad Print Epoxy based ink is recommended. (9.98) Sq .393 (11.5) Sq .453 AT465 (0.76) Typ .030 (0.76) Typ .030 (9.98) .393 (11.5) Sq .453 C (0.76) Typ .030 AT465 Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Shaded areas are printable areas. Supplement FILT AIR ER (4.61) Typ .181 (0.38) Typ .015 Recommended Print Method: Pushbuttons Suggested Printable Area for Cap Programmable Illuminated PB ON Rockers NKK Switches can provide custom legends for caps. Contact factory for more information. www.nkkswitches.com C37