FR01SC16HB-S

10mm DIP Rotaries Series FR01 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Highly visible legends and choice of screwdriver, shaft or dial actuators with arrow position indication provide trouble-free code setting. Knob actuator also available. Real or complement code setting identified by color-keyed actuator. Detent mechanism gives crisp, positive action for accurate switch setting. Crimped terminals ensure secure PC mounting and prevent dislodging during soldering. Cam activated movable contact and gold contacts assure contact reliability and continuity. Surface mount model with screwdriver actuation available and shown in the surface mount section. Actual Size Contact factory for custom models with .200” (5.08 mm) terminal spacing. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 General Specifications Electrical Capacity (Resistive Load) Switching Rating: Nonswitching Rating: 100mA @ 5V DC 100mA @ 50V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Torque: Contact Timing: 100 milliohms maximum for circuit; 30 milliohms maximum for contact point 1,000 megohms minimum @ 250V DC 250V AC minimum for 1 minute minimum 10,000 detent operations minimum 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360° rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles for decimal devices. Metal Shaft: 0.009Nm for decimal devices; 0.011Nm for hexadecimal devices All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices Shorting (Avoid possible false signal by turning off power before switching.) Materials & Finishes Actuators: Bushing : Outer Case: Housing & Base: Movable Contacts: Stationary Contacts: Terminals: Terminal Cover: Bracket: Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0); Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating Brass with nickel plating (for Metal Shaft model) Glass fiber reinforced PBT (for Metal Shaft model) Glass fiber reinforced polyamide (UL94V-0) Copper alloy with gold plating Phosphor bronze with gold plating Phosphor bronze with gold plating Polyamide (Right angle model only) Phospher bronze with tin plating (for Metal Shaft model) Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: –25°C through +85°C (–13°F through +185°F) 90 ~ 95% humidity for 240 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Custom process sealed version available; contact factory. Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: UL94V-0 rated actuator, housing and base The FR01 Series rotaries have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries TYPICAL SWITCH ORDERING EXAMPLE Series FR01 S PACKAGING Stick-Tubes: FR01F, FR01K, FR01S 50 Pieces/Stick FR01A 25 Pieces/Stick FR MOUNTING 01 Through-hole 01 R C K CIRCUITS R 16 P H P Straight Right Angle S PC TERMINALS Real Coded (Orange Actuator) Complement Coded (Yellow Actuator) Color not applicable to Actuator A ACTUATION F K S A Screwdriver Plastic Shaft Dial (for Straight Terminals only) Metal Shaft (for Optional Knobs) POSITIONS 10 16 Decimal Hexadecimal B BRACKET With Bracket For Actuator A only DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FR01KR16P-S Plastic Shaft Hexadecimal Positions Packaged in Stick-Tube Real Coded Straight PC Terminals MOUNTING 01 Through-hole A CTUATION F Screwdriver AT4180 Optional Snap-on Knob Polyamide Black knob with transparent flange (9.6) .378 (2.1) .083 (0.8) .031 (4.0) .157 (0.8) .031 (1.1) .043 Adjusted with a flat tipped screwdriver (6.7) .264 Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices. Install knob before mounting on PCB for right angle type; it should not be removed once mounted. When mounting, align slit in knob with arrowhead on actuator. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries A CTUATION K Plastic Shaft Series FR01 Metal Shaft S Dial A Adjusted by hand or with flat tipped screwdriver Adjusted by hand or with flat tipped screwdriver Knob options illustrated below with color choices Actuators are fully rotational and operate either clockwise or counterclockwise. Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices Mounting hardware is available if needed for models with Actuator A: Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section. OPTIONAL KNOBS FOR METAL SHAFT AT433 Plain Black Material: Polyacetal Color: Black (13.0) .512 (19.0) Dia .748 (11.0) Dia .433 AT4103 Small Color Tipped Polyester Base: Black (9.5) .374 (16.0) Dia .630 (9.5) Dia .374 AT4104 Large Color Tipped Polyester Base: Black (9.5) .374 (18.0) Dia .709 (11.0) Dia .433 Polyamide Tip Colors: A, B, C, E, F, G, H (14.3) .563 Polyamide Tip Colors: A, B, C, E, F, G, H (15.8) .622 (9.5) .374 (0.5) .020 (0.5) .020 (0.5) .020 Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,” white line on cap points to Actuator Position 0 noted in truth tables below. Color Codes: A Black B White C Red E Yellow F Green G Blue H Gray TRUTH TABLES (CIRCUITS & POSITIONS) Actuator Position x = ON Terminal No. (Output) 10 Decimal 16 Hexadecimal 01234567890123456789ABCDEF 1 R Real Coded Model Numbers: FR01FR, FR01KR, FR01SR, FR01AR 2 4 8 1 2 4 8 Terminal numbers are actually on the switch. Above sequence shown for clockwise rotation. C Complement Coded Model Numbers: FR01FC, FR01KC FR01SC, FR01AC N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS P Straight PC • Screwdriver (0.2) .008 (10.0) .394 (3.8) Dia .150 (10.0) .394 901 23 Series FR01 (0.2) .008 (10.0) .394 (3.8) Dia .150 (10.0) .394 (2.1) .083 (0.2) Typ .008 (7.62) .300 (3.3) .130 8 4 2 1 (2.54) Typ .100 1 2 C L 4 8 BCD 78 01 EF 2 (2.54) Typ .100 (7.62) .300 3 45 FR01FC10P Decimal Hexadecimal H Right Angle PC • Screwdriver 456 (0.2) .008 (3.8) Dia .150 (10.0) .394 (0.2) .008 (3.8) Dia .150 (10.0) .394 (3.25) .128 FR01FR10H Decimal Hexadecimal P Straight PC • Plastic Shaft (0.2) .008 (10.0) .394 901 (0.2) .008 (10.0) .394 BCD 78 01 EF 2 (10.0) .394 (10.0) .394 FR01KR16P Decimal Hexadecimal H Right Angle PC • Plastic Shaft (3.8) .150 456 (0.2) .008 (0.2) .008 (10.0) .394 FR01KC16H Decimal Hexadecimal 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 01 EF 2 901 (10.0) .394 (10.0) .394 3 45 23 89 67 A (10.0) .394 01 EF 2 89 67 A 456 901 (10.0) .394 (10.0) .394 3 45 23 89 67 A 456 C C (3.8) .150 (0.5) Typ .020 (1.27) .050 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (3.8) .150 89 67 A (2.75) .108 1 2 C C L 4 8 (2.54) Typ .100 BCD 78 (2.1) .083 (0.2) Typ .008 (2.54) .100 (3.3) .130 C 1248 (1.27) .050 (0.5) Typ .020 (2.54) Typ .100 (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (2.1) .083 (0.2) Typ .008 (7.62) .300 8 4 2 1 (2.54) Typ .100 1 2 C L 4 8 (2.54) Typ .100 (7.62) .300 3 45 23 78 (3.8) .150 (3.3) .130 (7.0) (3.8) .276 .150 C C (0.5) Typ .020 (1.27) .050 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (2.75) .108 1 2 C C L 4 8 (2.54) Typ .100 BCD (3.8) .150 (7.0) .276 (2.1) .083 (0.2) Typ .008 (2.54) .100 (3.25) .128 (3.3) .130 C 1248 (1.27) .050 (0.5) Typ .020 (2.54) Typ .100 (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS P Straight PC • Dial (0.2) .008 (10.0) .394 (3.0) .118 123 4 5 67 Series FR01 (2.1) .083 (0.2) Typ .008 (7.62) .300 8 4 2 1 (2.54) Typ .100 1 C L 2 4 8 (2.54) Typ .100 (7.62) .300 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (9.8) Dia .386 C C (10.0) .394 (3.4) .134 (1.27) .050 (7.2) .284 (3.3) .130 (0.5) Typ .020 FR01SR10P Decimal Hexadecimal P Straight PC • Metal Shaft (3.1) Dia .122 (11.0) .433 (11.6) .457 (13.1) .516 (2.28) .090 Flat (0.6) Typ .024 (7.62) .300 (2.54) Typ .100 8 4 2 1 (0.4) Typ .016 1 C L 2 48 (2.54) Typ .100 (7.62) .300 (0.8 ~ 1.0) Dia Typ .031 ~ .039 C (0.2) Typ .008 (0.5) Typ .020 C M6 P0.75 (10.0) .394 (6.1) .240 (11.95) .470 (3.3) .130 (12.7) .500 (1.27) .050 (12.7) .500 FR01AR10PB Shown in Position 0 with shaft flat rotated 180° from bushing flat H Right Angle PC • Metal Shaft (3.1) Dia .122 (11.0) .433 M6 P0.75 (0.4) Typ .016 C L (2.54) Typ .100 (7.62) .300 (5.5) .217 C 12 48 1 C 2 4 8 (2.28) .090 (11.6) .457 (13.1) .516 Flat (0.6) Typ .024 (3.03) .119 (6.1) .240 (0.2) Typ .008 (2.54) .100 (3.3) .130 (12.7) .500 (0.5) Typ .020 (2.54) Typ .100 (10.0) .394 (7.62) .300 (13.9) .547 (1.27) .050 (12.7) .500 (2.54) .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 FR01AC16HB Shown in Position 0 with shaft flat rotated 180° from bushing flat N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries PACKAGING S Stick-Tube FR01F, FR01K & FR01S Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. FR01A Each stick-tube contains 25 switches. Switches must be ordered in 25-piece increments. Note: Transport and storage temperatures should not exceed 50°C (122°F). Store stick tubes on flat surface. Series FR01 FR01F with Screwdriver Actuation & Straight PC FR01K with Plastic Shaft & Right Angle PC (16.4) .646 (15.7) .618 (16.0) .630 (540.0) 21.260 (15.4) .606 (530.0) 20.866 FR01S with Dial Actuation & Straight PC (13.9) .547 (12.3) .484 (528.0) 20.787 FR01A with Metal Shaft & Straight PC FR01A with Metal Shaft & Right Angle PC (18.2) .717 (35.5) 1.398 (33.6) 1.323 (390.0) 15.354 (13.1) .516 (390.0) 15.354 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08