FTAS00-12.1AN-4

Series FT 5-Wire Touch Screens Toggles General Specifications Rockers Electrical Capacity (Resistive Load) Other Ratings Power Level: 1mA @ 5.5V DC (resistive load) Pushbuttons XY Resistive Value: Linearity: Insulation Impedance: Expected Operational Life: Programmable Illuminated PB Touch Activation Force: Chattering Time: Light Transmission: Surface Hardness: Environmental Data 20 ~ 80Ω ±2.0% maximum 10MΩ minimum @ 25V DC Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping: 10,000,000 operations minimum (pressing force 4.9N using silicone rubber, hardness 60°) 0.05 ~ 0.8N 10 milliseconds maximum 80% standard (Touch Panel portion) 2H minimum (JIS K5600) Operating Temperature Range: –20°C ~ +70°C (–4°F ~ +158°F) Storage Temperature Range: –40°C ~ +80°C (–40°F ~ +176°F) Relative Humidity: +60°C (+140°F), humidity 90%, 240 hours Keylocks TYPICAL ORDERING EXAMPLE Rotaries FT AS Number of Keys Analog Slides 00 00 10.4 A 5 Input Method Screen Size A Type 5 Finger or Stylus 5-Wire 10.4 10.4” 12.1 12.1” DESCRIPTION FOR TYPICAL ORDERING EXAMPLE 15 15.0” FTAS00–10.4A–5 Touch Screen with 10.4" Screen Tactiles 5-Wire Analog Finger or Stylus Input L FTAS00-10.4A-5 Supplement Accessories Indicators Touch Tilt PART NUMBERS & DESCRIPTIONS FTAS00-12.1A-5 FTAS00-15A-5 5-Wire Analog Touch Screens Part Number Screen Size in Inches Key Area Dimensions Viewing Area Dimensions External Dimensions Panel Thickness Terminal Detail 8 Pin .049” (1.25mm) Pitch FTAS00-10.4A-5 10.4 8.5” x 6.45” (215.9mm x 163.9mm) 8.66” x 6.61” (219.9mm x 167.9mm) 9.31” x 7.22” (236.5mm x 183.3mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-12.1A-5 12.1 9.8” x 7.37” (249.0mm x 187.2mm) 9.94” x 7.50” (252.4mm x 190.6mm) 10.52” x 8.1” (267.1mm x 205.8mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-15A-5 15.0 12.05” x 9.06” (306.1mm x 230.1mm) 12.19” x 9.19” (309.5mm x 233.5mm) 12.79” x 9.79” (324.8mm x 248.7mm) .083” (2.1mm) Length 3.150” (80.0mm) Note: See web site for dimensioned drawings for all 5-Wire Analog Touch Screens. L20 www.nkkswitches.com 12/09/19 Series FT Toggles 5-Wire Touch Screens TYPICAL DIMENSIONS A (60.0) 2.36 H (80.0) 3.15 D Programmable Illuminated PB (1.25) Typ (5.0) .049 .197 (10.0) .394 (70.0) 2.76 Pushbuttons Rockers B Viewable Area C Active Area FTAS00-XXXA5 Horizontal Tail E Pin 1 F Pin 8 (0.5) .020 Center of Active Area (28.2) 1.11 Reinforcement Film Rotaries Keylocks (11.25) .443 (0.8)Typ .031 G Center of Active Area Contact Side Tin Plating UR 2 UL 1 3 NC 8 4, 5 SENSE 6 NC 7 LL 8 LR LL LR UL, LL, UR, LR: Bottom Electrode Terminal SENSE: Top Electrode Terminal Slides Tilt 1 UR UL L 5-Wire Analog Touch Screen Dimensions Part Number Screen Size in Inches FTAS00-10.4A-5 Dim F Dim G Center of Active Area (Horizontal) Dim H Center of Active Area (Vertical) 6.61” (167.9mm) 7.22” (183.3±0.3mm) 4.79” (121.55mm) 3.61” (91.65mm) 7.37” (187.2mm) 7.50” (190.6mm) 8.10” (205.8±0.3mm) 5.37” (136.4mm) 4.05” (102.9mm) 9.06” (230.1mm) 9.19” (233.5mm) 9.79” (248.7±0.3mm) 6.49” (164.95mm) 4.90” (124.35mm) Dim A Dim B Viewable Area Dim C Active Area Dim D Active Area Dim E Viewable Area 10.4 9.31” (236.5±0.3mm) 8.66” (219.9mm) 8.50” (215.9mm) 6.45” (163.9m) FTAS00-12.1A-5 12.1 10.52” (267.1±0.3mm) 9.94” (252.4mm) 9.80” (249.0mm) FTAS00-15A-5 15.0 12.79” (324.8±0.3mm) 12.19” (309.5mm) 12.05” (306.1mm) www.nkkswitches.com L21 Touch Signal Indicators Pins (2.1) .083 Tactiles Bottom Electrode Reinforcement Film Accessories Tail Reinforcement Film Supplement (0.3) .012 Top Electrode Series FT Toggles 5-Wire Touch Screens Controller Boards & Drivers Touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. Rockers DISTINCTIVE CHARACTERISTICS • Compatible with Control Board USB/RS232C For specifications or technical data for the controller boards and drivers, see NKK's web site or call our engineering support personnel. • Equipped with EPROM for Saving Setting Data Pushbuttons • Device Drivers are Windows 7, 8 & 10 Compatible Programmable Illuminated PB System Configuration for USB USB Cable USB Controller Board System Configuration for RS232C AT713 Receptacle Connector Connector RS232C Controller Board Connector Analog Touch Screen USB Header Connector Keylocks PC Analog Touch Screen IC Chip for Analog Touch Screen Install Device Driver Header Connector for 5V Install Device Driver Monitor IC Chip for Analog Touch Screen AT714 Receptacle Connector Connects to Power Source RS232C Header Connector PC Monitor 5V DC Power Supply Rotaries Available through NKK Switches General Specifications Items FTCS05B FTCU05B RS232C USB 2.0 Full Speed Clock 6MHz 6MHz Supply Voltage 5.0V 5.0V (Bus Power) Resolution 10bit 10bit Current Consumption 350mA maximum 350mA maximum Communication Speed 9600 bps ______ Tactiles Slides Interface Tilt Communication Format Data Length: 8bit Supplement Accessories Indicators Touch Absolute Maximum Ratings L Items Supply Voltage Input Voltage Minimum Maximum VCC –0.3V +5.5V ____ Notes ____ VCC Touch Panel Input *VRS –15V +15V RS232C Operating Temperature TO P R 0 +70°C +158°F ____ Storage Temperature TS TG –25°C –13°F +85°C +185°F ____ Items Symbols Minimum Typical Maximum Notes Supply Voltage VCC +4.75V +5.0 +5.25V ____ Operating Temperature TO P R 0 ____ +70°C +158°F No Condensation *VRS : Applies Only to RS232C L22 ______ Stop Bit: 1 Recommended Values Symbols VT P Parity: None www.nkkswitches.com Series FT Toggles 5-Wire Touch Screens Controller Boards & Drivers Rockers DISTINCTIVE CHARACTERISTICS • Compatible with Control Board USB/RS232C Controller Boards Available for USB Controller Boards Communication Protocol 5-Wire FTCS05B RS232C 5-Wire FTCU05B USB NKK offers controller boards compatible with USB or with RS232C. See web site or contact factory for specifications and technical data for any of the controller boards and drivers. Keylocks Part No. IC Chip & Accessories Rotaries DISTINCTIVE CHARACTERISTICS General Specifications for IC FTCSU548 • Data Function Removal Built In to Eliminate Noise IC FTCSU548 Interface Serial Interface (Asynchronous) or USB (Full Speed 2.0) Supply Voltage 3.3/5.0V Typ; USB Available for 5V Only * Rated Output Current High Level: –170mA Low Level: +170mA Operation Frequency 16MHz A/D Converter Resolution 10bit Operating Temperature –20°C ~ +85°C (–4°F ~ +185°F) Storage Temperature –40°C ~ +125°C (–40°F ~ +257°F) L * Total Output Electric Current Amount of all the I/O Port Indicators The IC is for use with the 5- and 4-wire transparent touch screens, and is available for those who prefer to design their own controller boards. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the A/D. The A/D converter receives the value and sends a set of coordinate values as serial data or USB. LFQFP 48 Pins Slides • Built-in Calibration Function Package Tactiles • High Speed and Accuracy Tilt • Interface: USB and RS232C AT713 Receptacle Connector AT714 Receptacle Connector This Receptacle Connector with code connects to RS232C communication of the controller boards. AT714 is a Receptacle Connector with code to connect to power source of the control boards. Accessories OPTIONAL ACCESSORIES For more details and dimensioned drawings of the accessories, go to NKK’s web site or call our engineering support personnel. www.nkkswitches.com L23 Supplement Type Programmable Illuminated PB • Device Driver Compatible with Vista and Windows XP Operating Systems Touch • Easy Integration Replacing Mouse Functionality Pushbuttons Controller Boards Available for RS232C • High Quality and Reliability Toggles Series FT Touch Screens STORAGE, HANDLING & INSTALLATION Rockers Handling of Controller Board • Use arc prevention to protect device from static electricity. • Power source should be activated after host and touch panel are connected. Pushbuttons • When inserting connector CN1 and touch panel tail, be sure the slider of connector CN1 is pulled. Do not pull more than 10 times. • Do not alter the product. • Do not use any commands other than the ones outlined in the specifications. Programmable Illuminated PB • Place the product away from noise source (such as inverter from LCD operation) since tail can be affected by noise. • If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. • This product does not support suspended mode (USB). • Protocol of USB transmission is one frame per one transaction. • Contact factory if not using the protocol above. • Warranty for one year after delivery. NKK warranties the 4-wire touch panel when it is used with the NKK control board and driver. Do not use third party control boards. NKK is not responsible for results of using damaged equipment with the controller boards. Keylocks • NKK Switches cannot assume responsibility for damages caused by software side during use of the touch screens. Rotaries • The touch screen pressed position may shift depending on various factors such as age, improper tail insertion or extreme tempera- tures. In such cases, recalibration is necessary. Installation • Products are ESD sensitive and ESD protection is required. • Do not pull on the tail. Do not apply stress to the tail area. Slides • Avoid vibration or shock. Avoid any force or stress that may cause deformation to the product. • The touch screen mounting should not be loose. This may cause an adverse effect on detecting performance during operation. Supplement Accessories Indicators Touch Tilt Tactiles • Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. L • The case or housing and upper electrode should have a space of about 0.5mm to accommodate expansion or shrinkage due to temperature variances. If a shock barrier is used, do not press hard on the upper electrode area. Any shock barrier should be installed more than 0.6mm away from A. Case/Housing Cushioning Material (0.5) Approx. .020 A Top Electrode (Film) Adhesive Layer * Sealing Material LCD (0.6) Min. .020 Bottom Electrode (Glass) Active Area Visible Area Example of Burr on Housing Interferes with Operation at Point A * Example: Double-sided Tape • To secure the touch screen, secure the lower portion with a device such as the LCD display panel. Do not attach the upper electrode with double-sided tape or similar product to avoid stress that can damage the upper or lower electrode. • In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. • Avoid air pressure applied to the touch screen as it may cause the top electrode to force air through the air vent, effecting electric endurance. If pressure inside of the touch panel is reduced through the air vent, it may cause interference fringes or may remain in ON status. • Ensure that the glass is handled carefully to prevent breakage during installation. • Moisture from condensation on tail connection or edges may result in migration, causing short circuit failure. • Remove protective film from the touch screen after installation is completed. L24 www.nkkswitches.com Toggles Series FT Touch Screens STORAGE, HANDLING & INSTALLATION Rockers Handling Precautions • When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, and corners or edges can be sharp. Wear gloves when handling the product. Pushbuttons • Do not pick up the product by the tail or pull the tail area. • Use gloves or finger cots to prevent fingerprints on surface. • When handling the product, hold it outside of the viewing area. Programmable Illuminated PB • Avoid stacking multiple products or placing other items on the product. • When packing or storing, the glass should be positioned face up. Operating Precautions • Operate with fingers or a touch screen stylus only. Keylocks • Do not press hard with a pen or similar object between viewing area and key area. Rotaries Design Precautions • With analog type, resistive value change (by aging or individual differences) can dislocate the input area. Input area can be calibrated with software. Slides • When installing on top of an LCD, noise from the display device can create misoperation. To avoid noise, implement grounding the display device frame. • Do not create software for simultaneous touch points, as analog type will read the center point between two touch points. • When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. Tactiles • Contact resistance may cause chatter depending on pressing condition. Software should detect signal after it stabilizes. Other Precautions Tilt • Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. • Store product in original package and store at the temperature and humidity range specified. • Products are guaranteed based on evaluation of standards within the moisture tolerance and usage temperature range, but not guaranteed to operate perpetually at this temperature. L Touch • Do not store in an environment with acids or other corrosive gases or where condensation may occur. • Note that an incorrect type of connector may damage the print surface. Indicators • Calibration data from one touch panel should not be applied to another panel; each should be calibrated individually. • Recalibration is necessary if connector has been removed from the tail and reconnected. • All specifications based on the tested touch screens only. Evaluate the products after installation with customer's equipment. Supplement Accessories • NKK Switches reserves the right to make product improvement changes without notice. www.nkkswitches.com L25