FTAS00-19AN-4A

New Product CN-0320 FT Series 4-Wire Analog Resistive Touch Screens with Gold Plated Tails Exceptional Continuity and Reliability 2017-10-23 Series FT Touch Screens DISTINCTIVE CHARACTERISTICS • Expansion of FT Series includes wider, larger, narrow frame types with gold plated tails, offering increased continuity and reliability • Touch screens with gold plated tails have decreased tail width; connector pins change from 8 pin with 1.25mm pitch to 4 pin with 1.0mm pitch • Tail material upgraded to polyimide resin from polyethylene terephthalate (PET), ensuring advanced flexibility, strength and resilience against heat • Construction of film and glass with superior durability and flexibility • Choice of input methods: finger or stylus • Wide range of panel sizes and tail positions, including 5.7", 6.5”, 8.4”, 10.4”, 10.6", 12.1”, 15”, 15.6” and 19” • Anti-Newton Ring (ANR) Technology eliminates many of the typical visual artifacts • Operator can easily direct the device without specialized technical training or computer knowledge by combining touch screen to LCD panel, plasma EL or other display • Touch screens support flexible design, including digital and analog, in a variety of sizes and relatively low cost • Anti-glare surface reduces reflection from fluorescent lighting, sunlight; hard resin coating ensures excellent protection against scratches or damage • Adhesive layer between glass and film has improved durability to withstand diverse environmental conditions APPLICATIONS • • • • Office Automation Industrial Automation Information Technology Banking Systems Cross Section View of Touch Screen • • • • Broadcast Hospitality Gaming/Entertainment Medical Equipment Transparent Conductive Film Bottom Electrode (Glass or Film) Specializing in Custom Products 2 Custom sizes for Resistive Touch Screens Capability to attach touch screens to LCDs or other components Specializing in custom construction such as film plus film combinations Fingerprint resistant, high transmittance films Availability of metallic tails (i.e., copper pattern plus gold plate) www.nkkswitches.com Top Electrode (Film) Adhesive Layer Note: Contact NKK Switches regarding use of FT Touch Screens for medical equipment. • • • • • Surface Dot Spacer Control Board for Analog Touch Panels • • Combining an analog touch panel with a controller board device driver on a computer enables performing the same operations as with a mouse by touching the touch panel screen NKK offers controller boards compatible with USB or with RS232C Series FT Touch Screens TYPICAL TOUCH SCREEN ORDERING EXAMPLE FT AS 00 10.6 A W 4 A Number of Keys 00 225 Tail Analog Screen Size Type Input Method *Digital A Finger or Stylus 5.7 5.7” **Position of Tail (Analog) 6.5 6.5” Left or Right (Horizontal) 8.4 8.4” No Code 10.4 10.4” V Top or Bottom (Vertical) 10.6 10.6” S Narrow Frame Type 1 (Horizontal) 12.1 12.1” 15 15.0” N Narrow Frame Type 2 (Horizontal) 15.6 15.6” W Wide Type (Horizontal) 19 19.0” applicable to FTAS225-5.7A-N (printed tail) 4-Wire N Digital Printed Tail 1.25mm Pitch A Gold Plated Tail 1.0mm Pitch DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FTAS00–10.6AW–4A Wide Type with Horizontal Tail Position ** Aspect Ratio: * Digital type only 4 No Code Touch Screen with 10.6" Screen Narrow Frame: 4:3 Wide Frame: 16:9 Finger or Stylus Input 4-Wire Analog GENERAL SPECIFICATIONS 4-Wire Analog Resistive Touch Screens Power Level 1mA @ 5V DC (resistive load) XY Resistive Value Narrow: 250 ~ 850Ω Linearity ±1.5% maximum Insulation Impedance 10MΩ minimum @ 25V DC Expected Operational Life Wide: 120 ~ 1,500Ω Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping: 1,000,000 operations minimum (pressing force 4.9N using silicone rubber, hardness 60°) Touch Activation Force 1.47N maximum Chattering Time 10 milliseconds maximum Relative Humidity +60°C (+140°F), humidity 90%, 240 hours Operating Temperature Range –20°C ~ +70°C (-4°F ~ +158°F) Storage Temperature Range –40°C ~ +80°C (–40°F ~ +176°F) Light Transmission 80% standard (Touch Panel portion) Surface Hardness 2H minimum (JIS K5600) Note: Values are determined by NKK's individual specification tests in a controlled environment, and do not certify that the product supports simultaneous multiple conditions. www.nkkswitches.com 3 Series FT Touch Screens PART NUMBERS & DESCRIPTIONS FTAS00-5.7AS-4A FTAS00-6.5AS-4A FTAS00-8.4AS-4A FTAS00-10.4AS-4A FTAS00-10.4AV-4A FTAS00-10.6AW-4A FTAS00-12.1AN-4A FTAS00-12.1AW-4A FTAS00-15AN-4A FTAS00-15.6AW-4A FTAS00-19AN-4A 4-Wire Analog Touch Screens Wide Type Horizontal Tale Narrow Frame Type 2 Vertical Horizontal Tale Tale Narrow Frame Type 1 Horizontal Tale Tail 4 Part Number Screen Size in Inches Key Area Dimensions Viewing Area Dimensions External Dimensions Panel Thickness Terminal Detail 4 Pin .039” (1.0mm) Pitch FTAS00-5.7AS-4A 5.7 4.535” x 3.402” (115.2mm x 86.4mm) 4.764” x 3.606” (121.0mm x 91.6mm) 5.157” x 3.976” (131.0mm x 101.0mm) .055” (1.4mm) Length 3.150” (80.0mm) FTAS00-6.5AS-4A 6.5 5.197” x 3.898” (132.0mm x 99.0mm) 5.433” x 4.134” (138.0mm x 105.0mm) 5.906” x 4.567” (150.0mm x 116.0mm) .055” (1.4mm) Length 3.150” (80.0mm) FTAS00-8.4AS-4A 8.4 6.728” x 5.102” (170.9mm x 129.6mm) 6.949” x 5.331” (176.5mm x 135.4mm) 7.343” x 5.685” (186.5mm x 144.4mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-10.4AS-4A 10.4 8.315” x 6.236” (211.2mm x 158.4mm) 8.465” x 6.394” (215.0mm x 162.4mm) 8.882” x 6.748” (225.6mm x 171.4mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-10.4AV-4A 10.4 8.354” x 6.276” (212.2mm x 159.4mm) 8.520” x 6.433” (216.4mm x 163.4mm) 8.917” x 7.205” (226.5mm x 183.0mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-12.1AN-4A 12.1 9.677” x 7.256” (245.8mm x 184.3mm) 9.827” x 7.406” (249.6mm x 188.1mm) 10.236” x 7.795” (260.0mm x 198.0mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-15AN-4A 15.0 11.972” x 8.980” (304.1mm x 228.1mm) 12.130” x 9.138” (308.1mm x 232.1mm) 12.669” x 9.665” (321.8mm x 245.5mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-19AN-4A 19.0 - 14.815” x 11.850” (376.3mm x 301.0mm) 15.039” x 12.102” (382.0mm x 307.4mm) 15.571” x 12.638” (395.5mm x 321.0mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-10.6AW-4A 10.6 9.071” x 5.441” (230.4mm x 138.2mm) 9.189” x 5.563” (233.4mm x 141.3mm) 9.756” x 6.094” (247.8mm x 154.8mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-12.1AW-4A 12.1 10.280” x 6.425” 10.404” x 6.551” 10.827” x 6.929” (261.12mm x 163.2mm) (264.26mm x 166.4mm) (275.0mm x 176.0mm) .083” (2.1mm) Length 3.150” (80.0mm) FTAS00-15.6AW-4A 15.6 13.551” x 7.618” (344.2mm x 193.5mm) .083” (2.1mm) Length 3.150” (80.0mm) 13.681” x 7.748” (347.5mm x 196.8mm) www.nkkswitches.com 14.276” x 8.433” (362.6mm x 214.2mm) Series FT Touch Screens TYPICAL DIMENSIONS Pin No. (0.3) ±0.05 .012 4 1 See Tail Detail Contact Side (Gold Plating) Reinforcement Vertical Frame Tail Detail 1 x 3 (3.0) .118 (5.0) ±1.0 .197 (65.0) 2.559 (80.0) ±1.0 3.15 (15.0) .591 Reinforcement Film Tail (0.7) Typ .028 (10.0) ±1.0 .394 (5.0) ±1.0 .197 Reinforcement Film YUP (0.5) .020 H D Bottom Electrode Pins Signal 1 YUP 2 YLO 3 XLE YLO XRI YUP, YLO: Bottom Electrode Terminal XLE, XRI : Top Electrode Terminal 4 E XRI 4 1 XLE Top Electrode F Center of Active Area YUP XLE YLO XRI (1.5) Air Vent .059 (2.1) ±0.2 .083 G Center of Active Area C B A Typical Dimensions for Vertical Frame Part Number Screen Size in Inches Dim A Dim B Viewable Area FTAS00-10.4AV-4A 10.4 8.917” (226.5±0.3mm) Dim C Active Area Dim D Active Area Dim E Viewable Area Dim F 8.520” 8.354” 6.276” 6.433” 7.205” (216.4mm) (212.2mm) (159.4mm) (163.4mm) (183.0±0.3mm) Dim G Center of Active Area (Horizontal) Dim H Center of Active Area (Vertical) 4.508” (114.5mm) 3.720” (94.5mm) (1.5) Air Vent .059 Wide Horizontal Frame Tail Detail (0.7) Typ .028 YUP D E (15.0) Pin No. .591 Reinforcement Film (5.0) ±1.0 .197 Signal 1 YUP YLO 2 YLO 3 XLE 4 XRI YUP 1 4 F Center of Active Area 1 x 3 (3.0) (0.5) .118 .020 Pins H XRI (5.0) ±1.0 .197 (10.0) ±1.0 .394 1 See 4 Tail Detail (80.0) ±1.0 3.150 (65.0) 2.559 XLE TYPICAL DIMENSIONS G Center of Active Area XLE C B XRI Contact (Gold Plating) YLO YUP, YLO: Bottom Electrode Terminal XLE, XRI : Top Electrode Terminal (0.3) ±0.05 .012 Reinforcement Reinforcement Film A Top Electrode Bottom Electrode Tail (2.1) ±0.2 .083 Typical Dimensions for Wide Horizontal Frame Part Number Screen Size in Inches Dim A Dim B Viewable Area FTAS00-10.6AW-4A 10.4 8.917” (247.8±0.3mm) 8.520” (233.4mm) FTAS0012.1AW-4A 12.1 10.827” 10.404" 10.280" 6.425" 6.551" (275.0±0.3mm) (264.26mm) (261.12mm) (163.2mm) (166.4mm) FTAS0015.6AW-4A 15.6 14.276" (362.6±0.3mm) 13.681" (347.5mm) Dim C Active Area Dim D Active Area Dim E Viewable Area Dim F 8.354” 6.276” 6.433” 7.205” (230.4mm) (138.2mm) (141.3mm) (154.8±0.3mm) 6.929" (176±0.3mm) 13.551" 7.618" 7.748" 8.433" (344.2mm) (193.5mm) (196.8mm) (214.2±0.3mm) www.nkkswitches.com Dim G Dim H Center Center of of Active Active Area Area (Horizontal) (Vertical) 4.508” (125.3mm) 3.720” (75.8mm) 5.468" (138.89mm) ––– 7.138" (181.3mm) ––– 5 Series FT Touch Screens TYPICAL DIMENSIONS Narrow Frame & Horizontal Tail (1.5) Air Vent .059 (80.0) ±1.0 3.150 YUP (65.0) 2.559 D (10.0) ±1.0 .394 See Tail Detail 1 x 3 (3.0) (0.5) .118 .020 E 1 4 F XRI (5.0) ±1.0 .197 XLE (0.7) Typ .028 Tail Detail H (5.0) ±1.0 .197 (15.0) Pin No. .591 Reinforcement Film Center of Active Area YLO G Center of Active Area C Contact (Gold Plating) (0.3) ±0.05 .012 Pins Signal 1 YUP 2 YLO 3 XLE 4 Reinforcement Film A Top Electrode Bottom Electrode Tail Reinforcement B (2.1) ±0.2 .083 YUP 1 4 XLE XRI YLO YUP, YLO: Bottom Electrode Terminal XLE, XRI : Top Electrode Terminal XRI Typical Dimensions for Narrow Frame Dim F Dim G Center of Active Area (Horizontal) Dim H Center of Active Area (Vertical) 3.976” (101.0±0.3mm) 2.648” (67.25mm) ––– 4.134” 4.567” (105.0mm) (116.0±0.3mm) 3.031” (77.0mm) ––– 6.728” (170.9mm) 5.102” 5.331” 5.685” (129.6mm) (135.4mm) (144.4±0.3mm) 3.734” (94.85mm) ––– 8.465” (215.0mm) 8.315” (211.2mm) 6.236” 6.394” 6.748” (158.4mm) (162.4mm) (171.4±0.3mm) 4.492” (114.1mm) ––– 10.236” (260.0.±0.3mm) 9.827” (249.6mm) 9.677” (245.8mm) 7.256” 7.406” 7.795” (184.3mm) (188.1mm) (198.0±0.3mm) 5.177” (131.5mm) 3.850” (97.8mm) 15.0 12.669” (321.8.±0.3mm) 12.130” (308.1mm) 11.972” (304.1mm) 8.980” 9.138” 9.665” (228.1mm) (232.1mm) (245.5±0.3mm) 6.398” (162.5mm) ––– 19.0 15.571” (395.5.±0.3mm) 15.039” (382.0mm) 14.815” (376.3mm) 11.850” 12.102” 12.638” (301.0mm) (307.4mm) (321.0±0.3mm) 7.799” (198.1mm) ––– Dim C Dim D Active Area Active Area Dim E Viewable Area 4.764” (121.0mm) 4.535” (115.2mm) 3.402” (86.4mm) 3.606” (91.6mm) 5.906” (150.0.±0.3mm) 5.433” (138.0mm) 5.197” (132.0mm) 3.898” (99.0mm) 8.4 7.343” (186.5.±0.3mm) 6.949” (176.5mm) FTAS00-10.4AS-4A 10.4 8.882” (225.6.±0.3mm) FTAS00-12.1AN-4A 12.1 FTAS00-15AN-4A FTAS00-19AN-4A 6 Part Number Screen Size in Inches Dim A Dim B Viewable Area FTAS00-5.7AS-4A 5.7 5.157” (131.0.±0.3mm) FTAS00-6.5AS-4A 6.5 FTAS00-8.4AS-4A www.nkkswitches.com Series FT Touch Screens Controller Board for RS232C FTCS04C CN1 4-Wire Analog Touch Screen Connector - 4 Pins (65.0) 2.559 Lot No. (57.0) 2.244 (17.0) .669 1 Y0 2 Y1 3 X0 4 X1 1 Description For YUP or YLO For XRI or XLE Pin No. 4 CN1 CN2 RS232C Header Connector - 3 Pins IC1 Controller Board Side (5.5) .217 3 1 (30.0) 1.181 Symbol CN3 2 (37.0) 1.457 Pin No. Pin Symbol No. 1 Pin No. Pin No. FTC S CN1 CN2 Computer Side RD Receiving Data (IN) Sending Data 2 SD Sending Data (OUT) Receiving Data 3 GND 1 04C (3.3) Dia Typ .130 Part No. Description GND GND CN3 Header Connector for Power Supply - 2 Pins Direction of Tail Insertion Contact Surface (5.6) .220 (1.3) .051 (1.6) .063 Pin No. Symbol Description 1 VCC Supply Voltage 2 GND GND Controller Board for USB FTCU04C (65.0) 2.559 Lot No. (30.0) 1.181 4 5 CN1 (4.5) .177 1 IC1 Pin No. Symbol 1 Y0 2 Y1 3 X0 4 X1 Description For YUP or YLO For XRI or XLE Pin No. 1 (37.0) 1.457 CN1 4-Wire Analog Touch Screen Connector - 4 Pins (57.0) 2.244 Pin No. CN4 FTC CN1 U CN4 Header Connector for USB - 5 Pins 04C (3.3) Dia Typ .130 Part No. Direction of Tail Insertion Contact Surface (1.6) .063 (3.95) .156 Pin No. Symbol Description USB VCC 1 VCC 2 D– USB D – 3 D+ USB D + 4 GND USB GND 5 GND Shield GND OPTIONAL ACCESSORIES Receptacle Connector & Wire Assembly for RS232C Receptacle Connector & Wire Assembly for Power Supply AT713 is the Receptacle Connector with code to connect to RS232C communication of the controller boards. It is compatible with FTCS04C. The cable length is adjustable. AT714 is a Receptacle Connector with code to connect to FTCS04C power source of the control boards. The cable length is adjustable. Wire Color Black Yellow Blue Pin No. 3 2 1 Wire Color Black Red Pin No. 2 1 (500.0) +50.0 0 19.685 (500.0) +50.0 0 19.685 www.nkkswitches.com 7 Series FT Touch Screens 4-Wire Touch Screen Controller Boards & Drivers DISTINCTIVE CHARACTERISTICS Controller Boards • Compatible with Control Board USB/RS232C Type Part No. Communication Protocol • Equipped with EPROM for Saving Setting Data 4-Wire FTCS04C RS232C • Device Drivers are Windows 7, 8 & 10 Compatible 4-Wire FTCU04C USB System Configuration for USB USB Cable USB Controller Board System Configuration for RS232C AT713 Receptacle Connector Connector RS232C Controller Board Connector Analog Touch Screen USB Header Connector PC Analog Touch Screen IC Chip for Analog Touch Screen PC Install Device Driver Header Connector for 5V Install Device Driver Monitor IC Chip for Analog Touch Screen AT714 Receptacle Connector Connects to Power Source RS232C Header Connector Monitor 5V DC Power Supply Available through NKK Switches Touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. For specifications or technical data for the controller boards and drivers, see NKK's web site or call our engineering support personnel. General Specifications Items FTCS04C FTCU04C Interface RS232C USB 2.0 Full Speed Clock 16MHz 16MHz Supply Voltage 5.0V 5.0V (Bus Power) Resolution 10bit 10bit Current Consumption 40mA maximum 100mA maximum Communication Speed 9600 bps ______ Communication Format Data Length: 8bit Parity: None Stop Bit: 1 ______ Absolute Maximum Ratings Items Recommended Values Symbols Minimum Maximum Notes VCC –0.3V +5.5V ____ VT P ____ VCC Touch Panel Input *VRS –15V +15V RS232C Operating Temperature TO PR –20°C –4°F +70°C +158°F ____ Storage Temperature TS TG –25°C –13°F +85°C +185°F ____ Supply Voltage Input Voltage Items Symbols Minimum Typical Maximum Notes Supply Voltage VCC +4.75V +5.0 +5.25V ____ Operating Temperature TO P R –20°C –4°F ____ +70°C +158°F No Condensation *VRS : Applies Only to RS232C 8 The controller board is designed specifically for touch screens with the gold plated tails. Refer to the product data sheet for detailed specifications, available by contacting NKK Switches. www.nkkswitches.com Series FT Touch Screens IC Chip for Analog Touch Screens DISTINCTIVE CHARACTERISTICS General Specifications for IC FTCSU548 • Interface: USB and RS232C • High Speed and Accuracy • Built-in Calibration Function • Data Function Removal Built In to Eliminate Noise The IC is for use with the 4-wire transparent touch screens. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the A/D. The A/D converter receives the value and sends a set of coordinate values as serial data or USB. Contact NKK Switches for the IC data sheet. Package LFQFP 48 Pins Interface Serial Interface (Asynchronous) or USB (Full Speed 2.0) Supply Voltage 3.3/5.0V Typ; USB Available for 5V Only * Rated Output Current High Level: –170mA Low Level: +170mA Operation Frequency 16MHz A/D Converter Resolution 10bit Operating Temperature –20°C ~ +85°C (–4°F ~ +185°F) Storage Temperature –40°C ~ +125°C (–40°F ~ +257°F) * Total Output Electric Current Amount of all the I/O Port STORAGE, HANDLING & INSTALLATION Handling of Controller Board • Use arc prevention to protect device from static electricity. • Power source should be activated after host and touch panel are connected. • When inserting connector CN1 and touch panel tail, be sure the slider of connector CN1 is pulled. Do not pull more than 10 times. • Do not alter the product. • Do not use any commands other than the ones outlined in the specifications. • Place the product away from noise source (such as inverter from LCD operation) since tail can be affected by noise. • If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. • This product does not support suspended mode (USB). • Protocol of USB transmission is one frame per one transaction. • Contact factory if not using the protocol above. • Warranty for one year after delivery. NKK warranties the 4-wire touch panel when it is used with the NKK control board and driver. Do not use third party control boards. NKK is not responsible for results of using damaged equipment with the controller boards. • NKK Switches cannot assume responsibility for damages caused by software side during use of the touch screens. • The touch screen pressed position may shift depending on various factors such as age, improper tail insertion or extreme tempera- tures. In such cases, recalibration is necessary. Installation • Products are ESD sensitive and ESD protection is required. • Do not pull on the tail. Do not apply stress to the tail area. • Avoid vibration or shock. Avoid any force or stress that may cause deformation to the product. • The touch screen mounting should not be loose. This may cause an adverse effect on detecting performance during operation. • Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. www.nkkswitches.com 9 Series FT Touch Screens STORAGE, HANDLING & INSTALLATION Case/Housing Cushioning Material Installation (Continued) • The case or housing and upper electrode should have a space of about 0.5 mm to accommodate expansion or shrinkage due to temperature variances. If a shock barrier is used, do not press hard on the upper electrode area. Any shock barrier should be installed more than 0.6 mm away from A. (0.5) Approx. .020 A Top Electrode (Film) Adhesive Layer * Sealing Material LCD (0.6) Min. .020 Bottom Electrode (Glass) Active Area Visible Area Example of Burr on Housing Interferes with Operation at Point A * Example: Double-sided Tape • To secure the touch screen, secure the lower portion with a device such as the LCD display panel. Do not attach the upper electrode with double-sided tape or similar product to avoid stress that can damage the upper or lower electrode. • In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. • Avoid air pressure applied to the touch screen as it may cause the top electrode to force air through the air vent, effecting electric endurance. If pressure inside of the touch panel is reduced through the air vent, it may cause interference fringes or may remain in ON status. • Ensure that the glass is handled carefully to prevent breakage during installation. • Moisture from condensation on tail connection or edges may result in migration, causing short circuit failure. Handling Precautions • When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, and corners or edges can be sharp. Wear gloves when handling the product. • Do not pick up the product by the tail or pull the tail area. • Use gloves or finger cots to prevent fingerprints on surface. • When handling the product, hold it outside of the viewing area. • Avoid stacking multiple products or placing other items on the product. • Remove protective film after installation is completed. • When packing or storing, the glass should be positioned face up. Operating Precautions • Operate with fingers or a touch screen stylus only. • Do not press hard with a pen or similar object between viewing area and key area. Design Precautions • With analog type, resistive value change (by aging or individual differences) can dislocate the input area. Input area can be calibrated with software. • When installing on top of an LCD, noise from the display device can create misoperation. To avoid noise, implement actions such as grounding the display device frame. • When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. • Contact resistance may cause chatter depending on pressing condition. Software should detect signal after it stabilizes. Other Precautions • Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. • Store product in original package and store at the temperature and humidity range specified. • Do not store in an environment with acids or other corrosive gases or where condensation may occur. • Products are guaranteed based on evaluation of standards within the moisture tolerance and usage temperature range, but not guaranteed to operate perpetually at this temperature. • Calibration data from one touch panel should not be applied to another panel; each should be calibrated individually. • Recalibration is necessary if connector has been removed from the tail and reconnected. • All specifications based on the tested touch screens only. Evaluate the products after installation with customer's equipment. 10 www.nkkswitches.com Series FT Touch Screens NKK Meets Demands of the Marketplace & Readily Offers Solutions & Expertise, Integrating the Highest Caliber of Products & Enhancing our Extensive Line of Touch Screens Market Demand Increases for Touch Screens with Gold Plated Tail Precise Solutions & Features Extra Benefits Uncompromised Reliability NKK Extends Lineup Minimizes Size of PCB; Exceptional Contact of Touch Screens & Adds Enables Utilization Reliability Exceeds Gold Plated Tail Option of Surface Expectations Vital to in Variety of Sizes Mount Connector Critical Operations Standard Size Series Specific Needs Require 1mm Pitch Connector New Standard Size Custom Size Sizes of Touch Screens in Inches Type 3.5 5.7 6.2 Wide 6.5 7.0 Wide 8.4 8.5 Wide 10.4 10.5 10.6 Wide 12.1 12.1 Wide 14.0 15.0 15.6 Wide 17.0 17.1 18.1 19.0 Digital FT 4-Wire Analog, Printed Tail 4-Wire Analog, Gold Plated Tail 5-Wire Analog, Printed Tail TP01 8-Wire Analog, Printed Tale 4-Wire Analog, Gold Plated Tail Note: NKK Switches does not supply the IC for 8-wire touch screens. NKK Switches feature a wide variety of standard touch screens. We also have the capability and expertise to offer custom solutions that would enhance any application. We can furnish designs in both digital (matrix) and analog type touch screens; custom sizes and key numbers; attachment of touch screen to LCDs or incorporation into peripheral devices; availability of film plus film combinations and fingerprint resistant, high transmittance films. Contact our experts and let us provide a resolution for all of your touch screen requirements. www.nkkswitches.com 11 Series FT Touch Screens NKK Expands Offering of Touch Screen Solutions with Variety of Functions Multi-Touch, Smooth Operation Zoom In, Zoom Out or Writing Functions TP01 Series 4-Wire Analog TP01 Series 4-Wire Analog 4.3 Narrow 4.3 Narrow 10.4" 12.1" 15.0" 19.0" 10.4" 12.1" 15.0" 19.0" 16.9 Wide 16.9 Wide 10.6" 12.1" 10.6" Controller Board 15.6" 12.1" 15.6" IC Chip Touch Screen Without IC Chip Superior Durability FT Series Digital FT Series Analog 5- or 8-Wire Analog 4.3 Narrow 5.7" 10.4" 12.1" Controller Board 15.0" IC Chip Variety of Sizes Exceptional Reliability FT Series 4-Wire Analog with Printed Tail FT Series 4-Wire Analog with Gold Plated Tail 4.3 Narrow 5.7" 4.3 Narrow 6.5" 16.9 Wide 10.6" 8.4" 10.4" 15.0" 12.1" Controller Board 6.5" 12.1" 16.9 Wide 19.0" 12.1" 5.7" 15.6" 10.6" Controller Board IC Chip 8.4" 10.4" 15.0" 10.4" 19.0" 12.1" 15.6" IC Chip Effective Date October 23, 2017 http://www.nkkswitches.com • 1.877.2BUYNKK (228.9655) 7850 East Gelding Drive • Scottsdale, AZ 85260 • Telephone 480.991.0942 • Fax 480.998.1435 12 www.nkkswitches.com