Toggles
Series KP
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Pushbuttons
Programmable Illuminated PB
Keylocks
Rotaries
Slides
Tactiles
Tilt
Touch
Indicators
Accessories
Low Level:
100mA maximum @ 12V DC
Other Ratings
D
Contact Resistance: 200 milliohms maximum
Insulation Resistance: 100 megohms minimum @ 250V DC
Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts & case for 1 minute minimum
Mechanical Life: 5,000,000 operations minimum;
1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap)
Electrical Life: 5,000,000 operations minimum
Nominal Operating Force: KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap)
KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap)
Travel: KP01: Pretravel .122” (3.1mm); Overtravel .055” (1.4mm); Total Travel .177” (4.5mm)
KP02: Pretravel .091” (2.3mm); Overtravel .047” (1.2mm); Total Travel .138” (3.5mm)
Materials & Finishes
Plunger/Upper Housing:
Lower Housing:
Movable Contact:
Stationary Contacts:
Switch Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Installation
Supplement
Miniature Audio/Video Pushbuttons
Cap Installation Force :
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
D36
Polyacetal
Glass fiber reinforced PBT (UL94V-0)
Stainless steel with gold plating
Gold over copper alloy
Brass with tin plating
–25°C through +50°C (–13°F through +122°F)
90-95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
51G (500m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
50.0N maximum downward force on actuator
Wave Soldering. See Profile A in Supplement section.
Manual Soldering. See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 lower housing
The KP Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
www.nkkswitches.com
Toggles
Series KP
Rockers
Distinctive Characteristics
Pushbuttons
KP series offers a complete switch solution for all broadcast panel needs,
including home keys and the rectangular switch/cap assembly.
Distinct, long total travel of .177” (4.5mm) for KP01 or shorter stroke
of .138” (3.5mm) for KP02.
D
Available with super bright red/green or amber/blue bicolor
LED or RGB LED. The RGB LED full color spectrum in a
switch package provides unlimited color combinations.
Keylocks
Unique actuation guide gives positive indication
of circuit transfer as well as smooth and silent
operation.
Programmable Illuminated PB
Miniature Audio/Video Pushbuttons
Rotaries
Choices of tactile, nontactile or tactile/audible
actuation.
Slides
Compact design with height of .906” (23.0mm)
from PC board to top of cap. (Same height as
programmable SmartSwitch™.)
Tactiles
Flat, sculptured or home key square caps in three
common sizes for design flexibility in audio/video
applications.
Touch
Tilt
Twin contacts with gold plating assure high reliability
and long life of 5,000,000 operations minimum.
Supplement
Accessories
Indicators
Actual Size
www.nkkswitches.com
D37
Toggles
Series KP
Miniature Audio/Video Pushbuttons
TYPICAL SWITCH
01
15A
N
B
K
D
G03
15A SPST
OFF
(ON)
( ) = Momentary
Normally Open Contacts
Travel & Force
01
Stroke: 4.5mm (.177”)
Actuation Force: 1.9N
02
Stroke: 3.5mm (.138”)
Actuation Force: 1.6N
Black only
Plungers
Pole & Circuit
A
9.2mm Plunger
for 12.0mm Cap
B
11.6mm Plunger for
15.0mm & 17.4mm
Caps
Contacts & Terminals
G03
Gold Contacts and
Straight PC Terminals;
100mA @ 12V DC
Actuation
01
C
Tactile
N
Nontactile
02
C
Tactile
N
Nontactile
S
Tactile/Audible
Tilt
Tactiles
Slides
Rotaries
K
Housing
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
KP
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
KP0115ANBKG036CF-2SJB
Indicators
11.6mm Plunger and
15.0mm Sculptured Cap
Clear Lens and White Diffuser
Accessories
SPST
OFF-Momentary ON Circuit
Normally Open Contacts
Super Bright
Red/Green Bicolor LED
Nontactile Actuation
Black Housing
Gold Contacts with 100mA Rating
Supplement
Straight PC Terminals
D38
www.nkkswitches.com
Series KP
Toggles
Miniature Audio/Video Pushbuttons
ORDERING EXAMPLE
S
JB
11
Rockers
2
LEDs
6CF
Super Bright
Red/Green Bicolor
6DG
Super Bright
Amber/Blue Bicolor
RGB
Red/Green/Blue
Cap Colors
Cap Types
F
Flat
S
Sculptured
T
Home Key
JB
Clear Lens &
White Diffuser
D
Bicolor Alternating
Legend Caps
* See Note
JCF
Red/Green
JDG
Amber/Blue
2
15.0mm Square
3
17.4mm Square
** See Note
Rotaries
12.0mm Square
Alternating Legends
Notes
* RGB LED Page D44
** Rectangular Cap Page D45
11
ON (pos)
12
ON (neg) OFF (neg)
13
START
STOP
14
OPEN
CLOSE
OFF (pos)
Slides
1
Keylocks
Cap Sizes
Programmable Illuminated PB
Pushbuttons
6CF
Tilt
Tactiles
Contact factory for custom
options.
Part Numbers for Alternating Legends
Amber/Blue
Home Key Cap
Touch
Sculptured Cap
Part Number
Part Number
Part Number
12mm Square
AT3093JCF11 ~ AT3093JCF14
AT3090JCF11 ~ AT3090JCF14
AT3096JCF11 ~ AT3096JCF14
15mm Square
AT3094JCF11 ~ AT3094JCF14
AT3091JCF11 ~ AT3091JCF14
AT3097JCF11 ~ AT3097JCF14
17.4mm Square
AT3095JCF11 ~ AT3095JCF14
AT3092JCF11 ~ AT3092JCF14
AT3098JCF11 ~ AT3098JCF14
12mm Square
AT3093JDG11 ~ AT3093JDG14
AT3090JDG11 ~ AT3090JDG14
AT3096JDG11 ~ AT3096JDG14
15mm Square
AT3094JDG11 ~ AT3094JDG14
AT3091JDG11 ~ AT3091JDG14
AT3097JDG11 ~ AT3097JDG14
17.4mm Square
AT3095JDG11 ~ AT3095JDG14
AT3092JDG11 ~ AT3092JDG14
AT3098JDG11 ~ AT3098JDG14
Refer to Ordering Table for Alternating Legend that corresponds with last 2 digits of part number.
Indicators
Flat Cap
Accessories
Red/Green
Cap Size
Supplement
Color
www.nkkswitches.com
D39
Series KP
Toggles
Miniature Audio/Video Pushbuttons
POLE & CIRCUIT
Rockers
Plunger Position
( ) = Momentary
KP0115A
Down
Normal
(ON)
Normally
Open
Throw & Switch Schematic
Down
Note: Switch terminals “1” & “1a” are actually
marked on the switch.
1 (COM)
1-1a
SPST
1a
ACTUATION
D
C
Tactile
KP01 or KP02
N
HOUSING
S
Nontactile
KP01 or KP02
K
Tactile/Audible
KP02 only
Black only
CONTACTS, TERMINALS, & RATING
G03
Gold Contacts
Straight PC Terminals
100mA @ 12V DC
Rotaries
SUPER BRIGHT BICOLOR LED SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
Slides
Tactiles
Tilt
Touch
Indicators
OFF
KP0215A
(–) L1
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
(+) COM
6 CF
Red or Amber
6DG
(–) L2
Green or Blue
Colors
Red
Green
Amber
Blue
Unit
LEDs are an integral Minimum Luminous Intensity
part of the switch
and are not available Standard Luminous Intensity
separately.
IV
230
220
204
113
mcd
IV
290
270
340
188
mcd
Maximum Forward Current
LED circuit is
isolated and requires
an external power
Typical Forward Current
source.
I FM
30
25
mA
If the source voltage
exceeds the rated
voltage, a ballast
resistor is required.
The resistor value
can be calculated
by using the
formula in the
Supplement section.
30
25
25 for Amber 22 for Amber
IF
15
5
20
20
mA
Forward Voltage
VF
2.0
3.1
2.1
3.2
V
Power Peak Dissipation
PD
72
88
75
100
mW
VRM
5
7
4
4
V
λ
620 ~ 630
528 ~ 538
583 ~ 595
464 ~ 476
nm
∆I F
0.40
0.36
0.40
0.33
mA/°C
Maximum Reverse Voltage
Wavelength at Peak Emission
Current Reduction Rate Above 25°C
Ambient Temperature Range
Supplement
Accessories
Normal
Model
SP
Keylocks
Programmable Illuminated PB
Pushbuttons
Pole
Connected Terminals
–25 ~ +50
Amber can be achieved by simultaneous illumination of Red & Green.
Purple can be achieved by simultaneous illumination of Amber & Blue.
D40
www.nkkswitches.com
–25 ~ +50
°C
Series KP
Toggles
Miniature Audio/Video Pushbuttons
PLUNGERS
(11.6)
.457
(6.4)
.252
11.6mm Plunger is designed
with a wider neck to hold both
the 15.0mm and 17.4mm Caps.
Pushbuttons
(6.4)
.252
9.2mm Plunger is designed
with a narrower neck to hold
the 12.0mm Cap.
11.6mm Plunger
for 15.0mm & 17.4mm Caps
Rockers
B
(9.2)
.362
CAP TYPES & COLORS
D
Caps for Bicolor and RGB
(6.5)
.256
(6.5)
.256
(12.0) Sq
.472
2
15.0mm Square
F
T
AT3078 Sculptured Cap
AT3086 Home Key Cap
(2.6) Dia
.102
Keylocks
S
AT3083 Flat Cap
(6.5)
.256
(12.0) Sq
.472
(12.0) Sq
.472
Rotaries
F
Used on A Plunger
Used on B Plunger
S
AT3084 Flat Cap
T
AT3079 Sculptured Cap
Slides
12.0mm Square
AT3087 Home Key Cap
(7.0)
.276
(7.0)
.276
(7.0)
.276
Tactiles
1
Programmable Illuminated PB
9.2mm Plunger
for 12.0mm Cap
A
(2.6) Dia
.102
F
S
AT3085 Flat Cap
(7.0)
.276
Tilt
Touch
Used on B Plunger
T
AT3080 Sculptured Cap
AT3088 Home Key Cap
Indicators
17.4mm Square
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(17.4) Sq
.685
(17.4) Sq
.685
(17.4) Sq
.685
Supplement
3
(15.0) Sq
.591
(15.0) Sq
.591
Accessories
(15.0) Sq
.591
www.nkkswitches.com
D41
Toggles
Series KP
Caps for Alternating Legends
1
12.0mm Square
Rockers
F
F
(2.6) Dia
.102
(6.5)
.256
N
D
(6.5)
.256
N
15.0mm Square
AT3096 Home Key Cap
O
(6.5)
.256
(12.0) Sq
.472
2
T
AT3090 Sculptured Cap
O
Pushbuttons
S
AT3093 Flat Cap
N
(12.0) Sq
.472
(12.0) Sq
.472
Used on B Plunger
S
AT3094 Flat Cap
T
AT3091 Sculptured Cap
AT3097 Home Key Cap
(7.0)
.276
N
O
N
N
(7.0)
.276
O
(7.0)
.276
O
Programmable Illuminated PB
Used on A Plunger
O
(2.6) Dia
.102
(15.0) Sq
.591
(15.0) Sq
.591
3
Rotaries
Keylocks
Miniature Audio/Video Pushbuttons
17.4mm Square
Used on B Plunger
S
AT3095 Flat Cap
T
AT3092 Sculptured Cap
AT3098 Home Key Cap
(7.0)
.276
(7.0)
.276
N
O
N
N
O
(7.0)
.276
O
Slides
F
(15.0) Sq
.591
(2.6) Dia
.102
Tactiles
Tilt
JB
(17.4) Sq
.685
(17.4) Sq
.685
(17.4) Sq
.685
Lens & Diffuser Colors Available:
Clear Lens
Clear/White
Touch
Standard Alternating Legend Pairs
11
Accessories
Indicators
White Diffuser
Materials & Finishes: Lens - Polycarbonate with glossy finish
Diffuser - Polycarbonate with textured finish
Optional Protective Guard AT4170 available; contact factory.
ON
OFF
Green/Red or Blue/Amber
12
ON
OFF
13
Green/Red or Blue/Amber
START STOP
14
Green/Red or Blue/Amber
Supplement
Cap illumination is alternating Green/Red or Blue/Amber; legend text is black.
Contact factory for other Alternating Legends.
Legend illustrations are approximate representations of the actual characters on the filters.
D42
www.nkkswitches.com
OPEN CLOSE
Green/Red or Blue/Amber
Series KP
Toggles
Miniature Audio/Video Pushbuttons
TYPICAL SWITCH DIMENSIONS
COM
L2
(7.62)
.300
(1.3) Dia Typ
.051
1
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
L1
1a
L1
C
L2
(5.08) +– 0.5
.200
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(6.0)
.236
(4.5)
.177 (12.7)
.500
Pushbuttons
(0.6) Typ
.024
1
(12.0) Sq
.472
(1.1)
.043
(6.5) (5.0)
(11.5)
.256 .197
.453
(23.0)
.906
1a
(4.5)
.177 (12.7)
.500
(0.25)
.010
(7.62)
.300
(0.37) Typ
.015
(12.7)
.500
KP0115ACAKG036CF-1SJB
15.0mm Square Cap
(3.6)
.142
(0.3)
.012
(0.6) Typ
.024
COM
L2
(7.62)
.300
(1.3) Dia Typ
.051
1
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
1
(15.0) Sq
.591
(1.1)
.043
(7.0) (4.5)
(11.5)
.276 .177
.453
(23.0)
.906
(0.37) Typ
.015
1a
(4.5)
.177 (12.7)
.500
(0.25)
.010
(7.62)
.300
L1
1a
L1
C
L2
(5.08) +– 0.5
.200
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(6.0)
.236
(4.5)
.177 (12.7)
.500
Keylocks
(6.4)
.252
(12.7)
.500
KP0115ANBKG036CF-2SJB
17.4mm Square Cap
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
L2
COM
(7.62)
.300
(1.3) Dia Typ
.051
1
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
1
(17.4) Sq
.685
1a
(4.5)
.177 (12.7)
.500
(0.25)
.010
(1.1)
.043
(11.5)
(7.0) (4.5)
.453
.276 .177
(23.0)
.906
(7.62)
.300
L1
1a
L1
C
L2
(5.08) +– 0.5
.200
(4.5)
.177 (12.7)
.500
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(6.0)
.236
Tactiles
(3.6)
.142
(12.7)
.500
Tilt
(6.4)
.252
D
Programmable Illuminated PB
(0.3)
.012
Rotaries
(3.6)
.142
Slides
(6.4)
.252
Rockers
12.0mm Square Cap
Bicolor Alternating Legend • 15.0mm Square Cap
(0.6) Typ
.024
L2
COM
(7.62)
.300
(1.3) Dia Typ
.051
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
1
(15.0) Sq
.591
(1.1)
.043
(7.0) (4.5)
(11.5)
.276 .177
.453
(23.0)
.906
1a
(4.5)
.177 (12.7)
.500
(0.25)
.010
(7.62)
.300
(0.37) Typ
.015
L1
(5.08) +– 0.5
.200
(6.0)
.236
(12.7)
.500
(15.0) Sq
.591
1
Indicators
(0.3)
.012
1a
L1
C
L2
(4.5)
.177 (12.7)
.500
Accessories
(3.6)
.142
(2.54) Typ
.100
(12.7)
.500
KP0115ANBKG036DG-2SJDG
www.nkkswitches.com
D43
Supplement
(6.4)
.252
Touch
KP0115ANBKG036CF-3SJB
Series KP
Toggles
Miniature Audio/Video Pushbuttons
RGB
Note: For applications that require
white illumination, contact factory.
Red
ATTENTION
Common
Anode (+)
RGB
ELECTROSTATIC
SENSITIVE DEVICES
Green
Color
Red
Green
Blue
Unit
Maximum Forward Current
I FM
30
30
30
mA
Typical Forward Current
IF
20
14
9
mA
Forward Voltage
VF
2.0
2.9
2.9
V
Power Peak Dissipation
PD
60
80
80
mW
Maximum Reverse Voltage
VRM
5
5
5
V
Dominant Wavelength
λd
621.5
522.5
472.5
nm
Current Reduction Rate Above 25°C
∆ IF
0.50
0.50
0.50
mA/°C
Blue
Ambient Temperature Range
–25 ~ +50
°C
TYPICAL SWITCH DIMENSIONS
12.0mm Square Cap with RGB LED
Common Anode (+)
B(-)
1
Terminal Detail
R(-)
G(-)
Rotaries
D
The electrical specifications shown are
determined at a basic temperature of
25°C.
LEDs are an integral part of the switch
and are not available separately.
LED circuit is isolated and requires an
external power source.
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
The resistor value can be calculated by
using the formula in the Supplement
Section.
1a
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
LED SPECIFICATIONS
(6.4)
.252
(7.62)
.300
(0.3)
.012
(3.6)
.142
(0.5) Typ
.020
(0.6) Typ
.024
(7.62)
.300
(1.3) Dia Typ
.051
Tactiles
KP0115ACAKG03RGB-1SJB
(12.0) Sq
.472
(1.1)
.043
(11.5)
(6.5) (5.0)
.256 .197
.453
(23.0)
.906
(4.5)
.177
1
(3.81)
.150
1a
Slides
1
(12.7)
.500
See Terminal
Detail
(1.52) Typ
.060
(0.2)
.008
(0.9) Dia Typ
.035
(0.7) Dia Typ
.028
R(-) G(-)
(4.5)
.177 (12.7)
.500
(3.81)
.150
(1.52) Typ
.060
(12.7)
.500
(12.7)
.500
(15.0) Sq
.591
(4.0)
.157
1a
B(-) (+)
Tilt
15.0mm & 17.4mm Square Caps with RGB LED
Common Anode (+)
B(-)
1
1a
Touch
15.0mm Cap
Terminal Detail
R(-)
G(-)
(0.5) Typ
.020
(6.4)
.252
KP0115ANBKG03RGB-2SJB
(7.62)
.300
(0.3)
.012
(0.6) Typ
.024
(17.4) Sq
.685
KP0115ANBKG03RGB-3SJB
D44
(1.1)
.043
(11.5)
(7.0) (4.5)
.276 .177
.453
(23.0)
.906
1
(3.81)
.150
(12.7)
.500
1a
Supplement
(3.6)
.142
(7.62)
.300
(1.3) Dia Typ
.051
1
Accessories
Indicators
(15.0) Sq
.591
See Terminal
Detail
(1.52) Typ
.060
(0.2)
.008
(4.0)
.157
17.4mm Cap
www.nkkswitches.com
(4.5)
.177
(12.7)
.500
(15.0) Sq
.591
(0.9) Dia Typ
.035
(0.7) Dia Typ
.028
1a
B(-) (+)
R(-) G(-)
(1.52) Typ
.060
(12.7)
.500
(4.5)
.177 (12.7)
.500
(3.81)
.150
Series KP
Toggles
Miniature Audio/Video Pushbuttons
RECTANGULAR CAP ASSEMBLY
Switch/Rectangular Cap Assembly
1
L–
1a
(0.6)
.024
(0.45) Sq Typ
.018
D
(0.3)
.012
(7.0)
.276
(17.4)
.685
(23.0)
.906
(12.7)
.500
(15.0) Sq
.591
(6.0)
.236
KP0115ACBKG03CJB for Tactile
KP0115ANBKG03CJB for Nontactile
See below for complete assembly of switch, LEDs and LED holders.
(+)
(-)
Color
Red
Unit
Maximum Forward Current
I FM
30
mA
Typical Forward Current
IF
20
mA
Forward Voltage
VF
2.0
V
Maximum Reverse Voltage
VRM
4
V
Dominant Wavelength
λd
623
nm
Current Reduction Rate Above 25°C
∆I F
0.32
mA/°C
–25 ~ +50
°C
Ambient Temperature Range
Rotaries
The electrical specifications shown are
determined at a basic temperature of 25°C.
Center LED is an integral part of the switch.
LEDs are not sold separately.
LED circuits are isolated and require an
external power source.
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement Section.
Keylocks
LED SPECIFICATIONS
Tactiles
Contact factory for other LED colors.
ASSEMBLY & INSTALLATION INSTRUCTIONS
(0.9) Dia Typ
.035
(2.54)
.100
Cathode
LED
(4.5)
.177
Tilt
(3.1) Dia
.122
(1.3) Dia Typ
.051
(2.54)
.100
(5.9)
.232
(4.8)
.189
LED
(6.7)
.264
(10.4)
.409
1
L–
1a
(0.8) Dia Typ
.031
(12.7)
.500
(7.62) (12.7) (22.86)
.300 .500 .900
(2.54)
.100
LED Holder
Switch/Rectangular Cap assembly has 3 LEDs
to achieve bright and even illumination.
One LED (in center of switch bottom) is an
integral part of the switch; the other 2 LEDs
and 2 LED Holders are packaged separately.
Switch
L+
Touch
LED Holder
Footprint
Indicators
(12.7)
.500
PCB
www.nkkswitches.com
Slides
(2.54)
.100
L+
1
Install LED into LED Holder
(quantity 2).
2
Solder LEDs and LED Holders
into PCB.
3
Solder switch into PCB making
sure that the two outer LEDs
and LED Holders clear the bottom side opening of the cap.
D45
Accessories
(7.62)
.300
Supplement
(12.7)
.500
(34.8)
1.370
Programmable Illuminated PB
Pushbuttons
(4.5)
.177
(3.6)
.142
Rockers
CAP ASSEMBLY DIMENSIONS
Toggles
Series KP
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Rockers
ATTENTION
Cap Orientation
ELECTROSTATIC
SENSITIVE DEVICES
Notch
Pushbuttons
As shown in the accompanying illustration, the cap and
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
D
Tab
Step
Plunger
Notches
Removal of Cap Assembly & Separation of Lens & Diffuser
Holding the switch tightly, pull the cap off the switch. Once the
cap assembly is released from the plunger, the lens and diffuser can
be separated.
Pry up the lens with fingernail or flat tip screwdriver inserted at
the step on the diffuser.
Keylocks
Programmable Illuminated PB
Miniature Audio/Video Pushbuttons
Installation or Replacement of Cap
Rotaries
Cap
Assembly
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
After aligning notches with tabs, join the lens and diffuser.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
D46
www.nkkswitches.com
Plunger
Switch
Series KP
Toggles
Miniature Audio/Video Pushbuttons
LEGENDS
Rockers
NKK Switches can provide custom legends for caps. Contact factory for more information.
Suggested Printable Areas for KP Lens
OP
ST
Printing on Diffuser
is not advisable.
Film
Insert
Diffuser
D
Rectangular Cap Lens
Keylocks
Shaded areas are suggested printable areas for Lens.
Sculptured Cap Lens
(28.75)
1.132
(13.4) Sq
.528
(17.4) Sq
.685
(12.8) Sq
.504
(15.0) Sq
.591
(8.97) Dia
.353
(10.5) Dia
.413
(0.76) Typ
.030
(11.48) Dia
.452
(13.0) Dia
.512
(0.76) Typ
.030
(13.77) Dia
.542
(15.3) Dia
.602
(0.76) Typ
.030
(13.77)
.542
(15.3)
.602
(0.76) Typ
.030
Tactiles
(9.8) Sq
.386
(12.0) Sq
.472
Rotaries
(30.28)
1.192
Suggested Printable Areas for KP Film Insert
Shaded areas are suggested printable areas for Film Insert.
Rectangular Film Insert
(0.5) R
.020
(0.76) Typ
.030
(11.28) Sq
.444
(12.8) Sq
.504
(0.76) Typ
.030
(11.88) Dia
.468
(13.4) Sq
.528
(0.76) Typ
.030
(8.28)Dia
.326
(9.8) Sq
.386
(0.76) Typ
.030
(11.28) Dia
.444
(12.8) Sq
.504
(0.76) Typ
.030
(11.88) Dia
.468
(13.4) Sq
.528
Touch
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(28.75)
1.132
(33.0)
1.299
(0.76) Typ
.030
(13.77)
.542
(15.6)
.614
(0.91) Typ
.036
Film Insert Material and Thickness: Clear Polyester; 4 mil (100µ) maximum thickness
Supplement
(8.28) Sq
.326
(9.8) Sq
.386
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(2.125) Typ
.084
Accessories
Sculptured or Home Key Cap Film Inserts
Flat Cap Film Inserts
Slides
Flat Cap Lens
Tilt
Laser Etch on clear lens, Screen Print, or Pad Print on lens.
Laser Print on film insert.
Epoxy based ink is recommended.
Programmable Illuminated PB
Recommended Methods:
Indicators
Pushbuttons
Lens
www.nkkswitches.com
D47
很抱歉,暂时无法提供与“KP0215ANBKG036CF”相匹配的价格&库存,您可以联系我们找货
免费人工找货