MB2511S4G01-BC

Series MB2500 Toggles General Specifications Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity (Resistive Load) Power Level (code W): Logic Level (code G): C Logic/Power Level (code A): Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Travel: Materials & Finishes Plunger: Bushing: Mounting & Body Frames: Support Bracket: Case: Base: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Tactiles Operating Temp Range: Humidity: Vibration: Tilt Shock: Installation Touch Mounting Torque: Cap Installation Force: Processing 3A @ 125V AC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines W & G ratings Note: See Supplement section to find explanation of operating range. 20 milliohms maximum for silver; 30 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1minute minimum; 1,500V AC minimum between contacts & case for 1minute minimum 200,000 operations minimum 25,000 operations minimum for silver; 100,000 operations minimum for gold Single pole 2.45N; double pole 3.92N Pretravel .024” (0.6mm); Overtravel .016” (0.4mm); Total Travel .039” (1.0mm) Brass with nickel plating Brass with nickel plating Stainless steel Brass with tin plating Polybutylene terephthalate (PBT) (UL94V-0) Diallyl phthalate resin Phosphor bronze with silver or gold plating Silver alloy (code W); copper with gold plating (code G) Silver with silver plating (code W); copper or brass with gold plating (code G) Copper with silver plating; copper or brass with gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 100 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) 1.5Nm (13 lb•in) for double nut; 0.7Nm (6 lb•in) for single nut 80N (18 lbf) maximum downward force on actuator Soldering: Wave Soldering Recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL : UL94V-0 Case File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” before dash in part number to order UL recognized switch. All single & double pole models recognized at 3A @ 125V AC or 0.4VA max. @ 28V AC/DC max. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” before dash in part number to order CSA certified switch. Single pole & double pole models certified at 3A @ 125V AC or 0.4VA max. @ 28V AC/DC max. Supplement Accessories Indicators Snap-Action Pushbuttons C116 www.nkkswitches.com 11/10/20 Series MB2500 Snap-Action Pushbuttons Short stroke and light touch. Antijamming design protects contacts from damage due to excessive downward force on the actuator. C Programmable Illuminated PB High torque bushing construction prevents rotation or separation from frame during installation. Pushbuttons Rockers Toggles Distinctive Characteristics Stainless steel frame resists corrosion. Keylocks Longer center solder lug terminal simplifies wiring and soldering. Patented silver contacts of specially composed alloy for hardness. Rotaries Epoxy sealed terminals prevent entry of solder flux and other contaminants. Slides Snap-acting mechanism gives smooth actuation and audible feedback. Bushing Mount Page C118 Bracket PC Mount Page C121 Snap-in Mount Page C124 Touch Tilt Tactiles Prominent external insulating barriers increase insulation resistance and dielectric strength. www.nkkswitches.com C117 Supplement Accessories Indicators Actual Size Toggles Series MB2500 TYPICAL SWITCH ORDERING EXAMPLE C 11 S4 Poles & Circuits Programmable Illuminated PB Pushbuttons Rockers MB25 11 SPDT ON (ON) 21 DPDT ON (ON) W Contact Materials & Ratings B Silver Rated 3A @ 125V AC G Gold Rated 0.4VA max @ 28V AC/DC max B .315” (8.0mm) Diameter C .394” (10.0mm) Diameter Terminals Bushing .315” (8.0mm) Threaded with Keyway Solder Lug A Black 03 .250” (6.35mm) Straight PC B White C Red E Yellow F Green G Blue Slides Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. Touch DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Indicators MB2511S4W01-BC Red .315” (8.0mm) Diameter Cap SPDT ON-(ON) Circuit Accessories Cap Colors 01 IMPORTANT: Supplement Silver Contacts with 3-Amp Rating C118 C Caps W ( ) = Momentary S4 01 Rotaries Keylocks Snap-Action Bushing Mount Pushbuttons www.nkkswitches.com .315” (8.0mm) Threaded Bushing with Keyway Solder Lug Terminals Series MB2500 Toggles Snap-Action Bushing Mount Pushbuttons POLES & CIRCUITS Normal Down Note: Terminal numbers are not actually on the switch. Pole Model SP MB2511 ON (ON) 3-1 3-2 SPDT DP MB2521 ON (ON) 3-1 6-4 3-2 6-5 DPDT Keyway Rockers Down Throw & Switch Schematics Keyway 3 (COM) 1 2 6 4 Programmable Illuminated PB 3 (COM) 1 C 2 5 BUSHING S4 .315” (8.0mm) Threaded with Keyway (0.6) .024 (2.85) Dia .112 M6 P0.75 Keylocks (8.0) .315 (8.0) .315 (0.8) .031 Rotaries (7.8) .307 Panel Cutouts With Optional Locking Ring Slides With Keyway (5.6) .220 (6.5) Dia .256 (6.5) Dia .256 (6.5) .256 (6.5) Dia .256 (2.2) Dia .087 (0.6) .024 Tactiles Without Keyway Maximum Panel Thickness with Standard Hardware: .134” (3.4mm) AT509 Lockwasher (8.0) .315 2 included with each switch AT507M Locking Ring (6.4) Dia .252 M6 P0.75 1 included with each switch (1.5) .059 (9.0) .354 Brass with  nickel plating Steel with zinc/chromate (10.2) Dia .402 Steel with zinc/chromate (0.5) .020 (0.9) .035 (2.0) .079 Tilt AT513M Threaded Hex Nut Optional Hardware (5.5) or .229 .250 Dia or 6.0mm (0.8) .031 (12.0) Dia .472 Indicators Standard Hardware Power Level 3A @ 125V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Supplement Silver over Silver Accessories CONTACT MATERIALS & RATINGS W Note: Complete explanation of operating range in Supplement section. www.nkkswitches.com Touch Normal Connected Terminals Pushbuttons Plunger Position ( ) = Momentary C119 Series MB2500 Toggles Snap-Action Bushing Mount Pushbuttons TERMINALS Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers 01 .250” (6.35mm) Straight PC 03 Solder Lug (4.0) .157 Epoxy Seal (2.0) .079 (2.0) (1.1) .079 .043 Thk = (0.8) .031 C (4.8) .189 3 2 (6.35) (4.8) .250 .189 Epoxy Seal (4.7) Typ .185 3 6 2 5 1 4 1 (1.8) Dia Typ .073 (1.17) .046 Thk = (0.8) .031 (4.7) Typ .185 (1.8) Dia Typ .073 Single Pole Double Pole CAPS & CAP COLORS B AT443 .315” (8.0mm) Diameter Cap C AT442 .394” (10.0mm) Diameter Cap (8.0) Dia .315 (7.6) .299 (8.8) .346 Material: Polycarbonate (10.0) Dia .394 Finish: Glossy Cap Colors Available: (9.0) .354 Material: Polycarbonate (8.0) .315 Finish: Glossy A Black B White C E Red F Yellow Green G Blue Solder Lug Single Pole Keyway Tactiles Slides TYPICAL SWITCH DIMENSIONS (8.0) Dia .315 (2.85) Dia .112 (1.2) .047 M6 P0.75 (13.0) .512 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.7) Typ .185 3 COM 2 NO 1 NC Tilt (4.0) .157 (8.8) .346 (8.8) .346 (2.0) .079 (0.8) (4.5) .031 .177 (14.0) .552 (7.9) .311 Solder Lug Indicators Touch MB2511S4W01-BC Keyway (8.0) Dia .315 (2.85) Dia .112 (1.2) .047 M6 P0.75 (13.0) .512 Accessories Supplement Double Pole (4.7) Typ .185 (8.8) .346 MB2521S4W01-BC C120 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 www.nkkswitches.com (8.8) .346 (0.8) (4.5) .031 .177 (14.0) .552 6 3 COM 5 2 NO 4 1 (4.0) .157 (4.8) .189 (12.7) .500 NC (2.0) Typ .079 Toggles Series MB2500 TYPICAL SWITCH ORDERING EXAMPLE (ON) W Silver Rated 3A @ 125V AC G Gold Rated 0.4VA max @ 28V AC/DC max ( ) = Momentary Bushing .315” (8.0mm) Diameter C .394” (10.0mm) Diameter Terminals .300” (7.6mm) Smooth with Keyway Rockers Cap Colors 13 .250” (6.35mm) Straight PC with Bracket 30 Right Angle (Single Pole only) 45 Vertical PC A Black B White C Red E Yellow F Green G Blue IMPORTANT: Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch S2 B Programmable Illuminated PB ON (ON) C Caps MB2511S2G13-BC Indicators DPDT ON C Red .315” (8.0mm) Diameter Cap SPDT ON-(ON) Circuit Gold Contacts with 0.4VA Rating .300” (7.6mm) Smooth Bushing with Keyway Accessories 21 SPDT Contact Materials & Ratings B .250” (6.35mm) Straight PC Terminals with Bracket www.nkkswitches.com Supplement 11 13 Keylocks Poles & Circuits G Rotaries S2 Slides 11 MB25 Pushbuttons Snap-Action Bracket PC Mount Pushbuttons C121 Series MB2500 Toggles Snap-Action Bracket PC Mount Pushbuttons POLES & CIRCUITS Normal C Connected Terminals Down Normal Throw & Switch Schematics Down Note: Terminal numbers are not actually on the switch. Pole Model SP MB2511 ON (ON) 3-1 3-2 SPDT DP MB2521 ON (ON) 3-1 6-4 3-2 6-5 DPDT Keyway Keyway 3 (COM) 1 2 3 (COM) 1 2 6 4 5 BUSHING S2 .300” (7.6mm) Smooth with Keyway (2.85) Dia .112 (0.6) .024 (6.2) Dia .244 Panel Cutout Keylocks Programmable Illuminated PB Pushbuttons Rockers Plunger Position ( ) = Momentary (5.6) .220 Rotaries (8.0) .315 (7.8) .307 (7.6) .300 (6.5) Dia .256 (0.9) .035 (0.6) .024 Tactiles Slides CONTACT MATERIALS & RATINGS W Silver over Silver Power Level 3A @ 125V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: Complete explanation of operating range in Supplement section. Tilt TERMINALS .250” (6.35mm) Terminal with .465” (11.8mm) Bracket Right Angle PC Single Pole only 30 45 Vertical PC Indicators Touch 13 (1.6) Typ .063 (2.4) Typ .095 Accessories (1.6) Typ .063 3 2 Supplement 1 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 C122 3 6 2 5 1 4 CL (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 3 2 1 (4.7) Typ .185 (2.54) Typ .100 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 www.nkkswitches.com (2.54) Typ .100 3 3 6 2 2 5 1 1 4 (12.7) .500 (2.54) Typ .100 (4.8) .189 (1.8) Dia Typ .073 (12.7) .500 (2.54) Typ .100 (1.8) Dia Typ .073 Series MB2500 Toggles Snap-Action Bracket PC Mount Pushbuttons CAPS & CAP COLORS Material: Polycarbonate (7.6) .299 (8.8) .346 Finish: Glossy Cap Colors Available: (8.0) .315 (9.0) .354 Finish: Glossy A B Black C White E Red C F Yellow Green G Blue TYPICAL SWITCH DIMENSIONS (1.2) .047 (6.2) Dia .244 (6.35) .250 (15.8) .622 (4.7) Typ .185 (0.9) .035 (8.0) .315 (8.8) .346 (8.5) .335 (3.2) .126 (0.8) Typ .031 (4.8) .189 (3.2) .126 (1.17) Typ .046 (13.0) .512 3 COM 2 NO 1 NC (0.5) Typ .020 (13.0) .512 (1.17) Typ .046 6 3 COM 5 2 NO 4 1 NC (1.17) .146 (1.17) Typ .046 (4.8) .189 (12.7) .500 (7.9) .311 (16.6) .654 Straight PC • Bracket Keylocks (8.0) Dia .315 (2.85) Dia .112 Keyway Double Pole Rotaries Single Pole Pushbuttons (10.0) Dia .394 (8.0) Dia .315 Material: Polycarbonate Rockers AT442 .394” (10.0mm) Diameter Cap C Programmable Illuminated PB AT443 .315” (8.0mm) Diameter Cap B (8.0) Dia .315 (2.85) Dia .112 Keyway (1.2) .047 (6.2) Dia .244 Right Angle PC Tactiles Single Pole NC NO COM (7.9) .311 1 2 3 (13.0) .512 (8.8) .346 (8.7) .342 (0.4) .016 (1.27) .500 (1.27) .050 (0.8) Typ .031 (4.7) Typ .185 MB2511S2G30-BC Single Pole Vertical PC Indicators (1.2) .047 (8.0) Dia .315 (2.85) Dia .112 (7.6) .299 (8.8) .346 (8.7) .342 (0.4) .016 (12.7) .500 (2.7) .106 (0.8) Typ .031 (2.54) Typ .100 3 COM 6 3 COM 2 NO 5 2 NO 1 NC 4 1 NC (1.27) .050 (7.9) .311 (12.7) .500 Accessories (6.2) Typ .244 (13.0) .512 (1.4) Typ .055 (5.08) .200 Double Pole (1.27) Typ .050 (4.8) .189 MB2511S2G45-BC www.nkkswitches.com Touch (5.08) .200 (7.6) .299 C123 Supplement (1.4) Typ .055 Tilt (4.3) .169 (2.9) .114 Keyway Slides MB2511S2G13-BC Toggles Series MB2500 TYPICAL SWITCH ORDERING EXAMPLE Rockers Pushbuttons 11 MB25 J W 01 A C Poles & Circuits 11 SPDT ON (ON) 21 DPDT ON (ON) Contact Materials & Ratings W Silver Rated 3A @ 125V AC G Gold Rated 0.4VA max @ 28V AC/DC max ( ) = Momentary Mounting Frame Keylocks Programmable Illuminated PB Snap-Action Snap-in Mount Pushbuttons Snap-in Frame Rotaries J Terminals 01 Solder Lug IMPORTANT: Tilt Tactiles Slides Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch MB2511JW01-A Indicators Black Cap Snap-in Frame SPDT ON-(ON) Circuit Supplement Accessories Silver Contacts with 3-Amp Rating C124 www.nkkswitches.com Solder Lug Terminals Cap & Cap Colors A Black B White C Red E Yellow F Green G Blue H Gray Series MB2500 Toggles Snap-Action Snap-in Mount Pushbuttons POLES & CIRCUITS Normal Down Normal Down MB2511 ON (ON) 3-1 3-2 SPDT MB2521 ON (ON) 3-1 6-4 3-2 6-5 DPDT Pole Model SP DP Rockers Throw & Switch Schematics Note: Terminal numbers are not actually on the switch. 3 (COM) 1 3 (COM) 1 C 2 2 6 4 5 MOUNTING FRAME (18.0) .709 Panel Cutout for Single Pole without Bezel Panel Cutout for Double Pole without Bezel (15.0) .591 (12.5) .492 (2.85) Dia .112 (15.0) .591 Keylocks Snap-in Frame (13.1) .516 Panel Thickness without Bezel: .039” ~ .157” (1.0mm ~ 4.0mm) Panel Thickness with Bezel: .039” ~ .126” (1.0mm ~ 3.2mm) (12.2) .480 Rotaries J Pushbuttons Connected Terminals Programmable Illuminated PB Plunger Position ( ) = Momentary CONTACT MATERIALS & RATINGS Silver over Silver Power Level 3A @ 125V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Tactiles Slides W Note: Complete explanation of operating range in Supplement section. Tilt TERMINALS (4.0) .157 Epoxy Seal (2.0) .079 Touch (2.0) (1.1) .079 .043 Thk = (0.8) .031 AT465 .453” (11.5mm) Square Cap (3.8) .150 (11.5) Sq .453 (8.4) .331 Material: Polycarbonate Finish: Glossy Cap Colors Available: A Black Indicators CAP & CAP COLORS Contact factory for matte finish. B White C Red E Yellow www.nkkswitches.com F Green G Blue H Gray C125 Accessories Solder Lug Supplement 01 Toggles Series MB2500 Snap-Action Snap-in Mount Pushbuttons TYPICAL SWITCH DIMENSIONS Single Pole NKK PN on Opposite Side (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (11.5) Sq .453 (18.0) .709 (4.7) Typ .185 C (12.2) .480 MB2511JW01-A (3.3) .130 (14.0) .551 Solder Lug 3 COM 2 NO 1 NC (2.0) .079 (7.9) .311 (24.9) .980 Double Pole NKK PN on Opposite Side (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (11.5) Sq .453 (18.0) .709 (4.7) Typ .185 (3.3) .130 (12.2) .480 MB2521JW01-C (13.0) .512 (14.0) .551 6 3 COM 5 2 NO 4 1 NC (4.0) .157 (4.5) .177 (0.5) .020 Rotaries (13.0) .512 (4.0) .157 (4.5) .177 (0.5) .020 Keylocks Programmable Illuminated PB Pushbuttons Rockers Solder Lug (4.8) .189 (12.7) .500 (24.9) .980 (2.0) .079 Slides OPTIONAL SNAP-IN BEZELS & BEZEL COLORS AT207 Bezel (11.8) .465 Tactiles Material: Polycarbonate Finish: Glossy (2.2) .087 Colors: Black, White, Red, Yellow, Green, Blue, Gray (15.0) .591 (12.0) .472 (15.6) .614 (21.5) .846 Double Pole (12.5mm) .492” (13.1mm) .516” Single Pole Double Pole A (12.5mm) .492” (13.1mm) .516” B (6.25mm) .246” (6.55mm) .258” Single Pole Double Pole (18.4mm) .724” (18.7mm) .736” A A Tilt Contact factory for matte finish. Single Pole Touch AT208 Bezel for AT070 LED (12.0) .472 Indicators Accessories (15.6) .614 Contact factory for matte finish. AT212 Bezel for AT617 LED C126 (30.2) 1.19 (15.0) .591 A (12.0) .472 (10.0) .394 (2.2) .087 (8.0) .315 (8.8) Dia .346 (13.8) .543 (5.4) Dia .213 Material: Polycarbonate Finish: Semi-glossy Color: Black B (2.2) .087 (13.5) .531 Material: Polycarbonate Finish: Glossy Color: Black Supplement (11.8) .465 (19.0) .748 (3.0) Dia Typ .118 (7.8) .307 (11.8) .465 (21.5) Sq .846 www.nkkswitches.com (15.0) .591 A A Toggles Series MB2500 OPTIONAL SNAP-IN BEZELS & BEZEL COLORS (2.0) Typ .079 (2.2) .087 (7.8) .307 (11.8) .465 (8.0) .315 Color: Black (15.0) .591 Double Pole (18.4mm) .724” (18.7mm) .736” A C A (21.5) Sq .846 (5.0) Typ .197 Single Pole Bezel Assembly 1. Pry out tab on bezel to a 45° angle. Tab 2. Insert switch frame under tab and snap on the bezel. 45° Tab 3. Push tab back into place. 4. Snap assembled bezel and switch into panel. Keylocks LED COLORS & SPECIFICATIONS Bezel Orientation on Switch AT617 LED For Bezel AT212 with 2 Round LEDs (5.3) .209 (7.0) .276 Top LED Bottom LED Circuit Mark This Side Top LED Circuit Mark This Side (5.0) .197 (+) (-) Bottom LED Slides (7.7) .303 AT618 LED For Bezel AT213 with 2 Rectangular LEDs (3.7) .146 (+) (-) (-) Tactiles (5.08) Dia .200 Circuit Mark This Side AT070 LED For Bezel AT208 with 1 LED Rockers Material: Polycarbonate Finish: Semi-glossy (12.0) .472 Pushbuttons (10.0) .394 Programmable Illuminated PB AT213 Bezel for AT618 LED Rotaries Snap-Action Snap-in Mount Pushbuttons (+) Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). Tilt AT618 F C E F C E F Color Red Green Red Yellow Green Red Yellow Green Maximum Forward Current IFM 25mA 50mA 30mA 30mA 30mA 25mA 30mA 25mA Typical Forward Current IF 20mA 30mA 20mA 20mA 20mA 20mA 20mA 20mA Forward Voltage VF 2.8V 2.1V 2.1V 2.1V 2.2V 2.25V 2.1V 2.2V Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.33 mA/°C 0.40 mA/°C 0.40 mA/°C 0.40 mA/°C 0.40 mA/°C 0.33 mA/°C 0.40 mA/°C 0.33 mA/°C (-) Ambient Temperature Range (when used with a bezel) –10° ~ +70°C –15° ~ +70°C Accessories C (+) –25° ~ +70°C Supplement The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is independent of switch operation. LED is colored in OFF state. If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the LED. The ballast resistor calculation and more lamp detail are shown in the Supplement section. www.nkkswitches.com Touch AT617 Indicators AT070 C127