MS12AFW01

Toggles Series MS Rockers General Specifications Electrical Capacity (Resistive Load) Programmable Illuminated PB Pushbuttons Power Level (silver): 6A @ 125V AC or 3A @ 250V AC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level: Combines silver & gold ratings (gold over silver) Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Keylocks Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Total Travel: Tilt Tactiles Slides Rotaries Materials & Finishes H Actuator: Frame: Dust Cover: Case: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Indicators Touch Processing Soldering: Cleaning: 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Nonshorting (break-before-make) On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm) Glass fiber reinforced PBT resin (UL94V-0) Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount Phosphor bronze with nickel plating Glass fiber reinforced diallyl phthalate resin (UL94V-0) Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver capped copper with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering recommended (PC Mount). See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 rated actuator & case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” to end of part number to order UL recognized switch. All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. All Double Throw & 3 Throw models certified at 6A @ 125V AC, 3A @ 250V AC, & 0.4VA maximum @ 28V DC. Supplement Accessories Miniature Slides H30 www.nkkswitches.com Toggles Series MS Miniature Slides Rockers Distinctive Characteristics Pushbuttons Available in flat frame and bracketed PC mounting types. Programmable Illuminated PB Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability. Keylocks Antijamming design protects contacts from damage due to excessive downward force on the actuator. Specially composed silver alloy contacts for power applications or gold contacts for logic level applications give high contact reliability. Tactiles H Slides Rotaries High internal barriers between poles and insulating sheet between case and actuator block give added protection to contacts. Prominent external insulating barriers increase insulation resistance and dielectric strength. Touch Actual Size Supplement Accessories Indicators Clinching of frame to case well above base and terminals provides 1,500V dielectric strength. Tilt Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. www.nkkswitches.com H31 Series MS Toggles Miniature Slides TYPICAL SWITCH ORDERING EXAMPLE Pushbuttons Rockers MS 2 A S Programmable Illuminated PB 1 SPDT 2 DPDT SP3T Actuators Keylocks NONE ON ON OFF ON 0 ON ON ON Rotaries ON 3 H 30 A .150” (3.8mm) Wide for Single or Double Pole W Silver; Rated 6A @ 125V AC & 3A @ 250V AC B .323” (8.2mm) Wide for Double Pole G Gold; Rated 0.4VA max. @ 28V AC/DC max. A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max. @ 28V AC/DC max. Circuits 2 G Contact Materials & Ratings Poles Mounting F Panel Mount (Terminal 01 only) N PCB Mount (Terminal 03 only) 01 Solder Lug 03 Straight PC S Bracket Mount (Terminals 13, 30, & 40 only) 13 Straight with Bracket 30 Right Angle PC 40 Vertical PC Terminals IMPORTANT: Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. Touch Tilt Tactiles Slides 1 DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Indicators MS12ASG30 Gold Contacts with 0.4VA Rating Accessories .150” (3.8mm) Wide Actuator Right Angle PC Terminals with Support Bracket Supplement SPDT ON-NONE-ON Circuit H32 www.nkkswitches.com Series MS Toggles Miniature Slides POLES & CIRCUITS DP Right MS12 ON NONE ON MS13 ON OFF ON MS22 ON NONE ON MS23 ON OFF ON Left Center Right 2-1 OPEN 2-3 Note: Model Terminal numbers are not actually on the switch. 2 (COM) SPDT 1 2-1 5-4 OPEN 2-3 5-6 Rockers Center 2 DPDT 1 Pushbuttons SP Left Throw & Schematics 3 (COM) 3 5 Programmable Illuminated PB Pole Connected Terminals 6 4 For 3 Throw (3-On) Connected Terminals & Schematics MS20 Left Center Right ON ON ON External Connection 2 (in) 5 3 4 (out) 6 (out) 1 (out) External Connection 2 (in) 5 1 (out) 2-1 5-4 External Connection The SP3T model utilizes a double pole base. External Connection 2 (in) 5 3 4 (out) 6 (out) 1 (out) 2-3 5-4 Keylocks SP Model (out) 3 4 (out) 6 (out) 2-3 5-6 External connections must be made during field installation. External Conn 6 3 5 2 4 1 (out) Common (in) Rotaries Pole (out) ACTUATORS .150” (3.8mm) Wide for Single Pole (3.8) .150 (3.8) .150 B .323” (8.2mm) Wide for Double Pole Only (3.8) .150 (3.8) .150 (8.2) .323 Tilt (3.8) .150 .150” (3.8mm) Wide for Double Pole Tactiles A H Slides Slide Position Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Indicators W Touch CONTACT MATERIALS & RATINGS Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. www.nkkswitches.com Supplement A Accessories Note: Complete explanation of operating range in Supplement section. H33 Series MS Toggles Miniature Slides MOUNTING TYPES & TERMINALS Rockers F Pushbuttons (4.19) .165 Programmable Illuminated PB Straight PC Mount (Combines with Straight PC Terminal 03 only) (9.0) .354 SP or DP with .150” (3.8mm) Actuator Maximum Panel Thickness: .197” (5.0mm) S (17.53) .690 (17.53) .690 Dimension A = .268” (6.8mm) for on-none-on .319” (8.1mm) for on-off-on & on-on-on N A A DP only with .323” (8.2mm) Actuator Support Bracket Mount (For Terminals 13, 30, & 40) Maximum Panel Thickness: For Straight PC with Bracket Terminal 13: .197” (5.0mm) For Angle Mount Terminals 30 & 40: .177” (4.5mm) Keylocks 01 03 Solder Lug Epoxy Seal (4.0) .157 Straight PC Rotaries (2.0) (1.1) .079 .043 Thk = (0.8) .031 (1.17) .046 Thk = (0.8) .031 13 Straight PC with Bracket 30 Right Angle PC 40 Vertical PC TYPICAL SWITCH DIMENSIONS Solder Lug Terminals Single Pole (1.2) R Typ .047 (1.1) x (2.0) Typ .043 x .079 (6.1) .240 (0.8) Typ .031 3 ON (17.53) .690 (12.7) .500 2 (3.8) .150 (4.7) Typ .185 1 Tilt (19.6) .772 ON H (6.35) (4.8) .250 .189 Epoxy Seal (2.0) .079 Tactiles Slides (2.4) Dia Typ .094 (2.4) Dia Typ .094 Panel Mount (Combines with Solder Lug Terminal 01 only) (3.8) .150 (6.6) .260 (0.4) .016 (5.1) (6.4) (4.5) .201 .252 .177 Touch MS12AFW01 (0.5) .020 (2.0) .079 Actuator in LEFT Position Solder Lug Terminals Double Pole (1.2) R Typ .047 Indicators (0.5) .020 (1.1) x (2.0) Typ .043 x .079 (1.2) R Typ .047 (2.0) Typ .079 (17.53) .690 (19.6) .772 (3.8) .150 Supplement (6.1) .240 (3.8) .150 (6.1) .240 (8.2) .323 MS22BFW01 H34 ON Accessories (17.53) .690 (19.6) .772 ON (0.8) Typ .031 (0.4) .016 (5.1) (6.4) (4.5) .201 .252 .177 (4.7) Typ .185 (0.5) .020 Actuator in LEFT Position www.nkkswitches.com 6 3 5 2 4 1 (4.8) .189 (11.4) .449 (12.7) .500 (0.5) .020 Series MS Toggles Miniature Slides TYPICAL SWITCH DIMENSIONS (0.8) Typ .031 Actuator in LEFT Position Double Pole 5 2 4 1 (4.8) .189 (6.35) .250 1 4 (0.5) .020 MS22BNG03 Single Pole (3.8) .150 (4.8) .189 Straight PC Terminals with Bracket (3.2) .126 (0.4) Typ .016 (1.2) Typ .047 ON ON Actuator in LEFT Position Double Pole (8.2) .323 ON (4.8) .189 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 ON (3.8) .150 (0.4) Typ .016 (0.36) .014 (10.4) .409 (10.4) .409 (5.1) .201 (6.7) .264 (14.3) .563 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (0.5) .020 (1.17) .046 Tilt (7.1) .280 (3.8) .150 (4.7) Typ .185 1 1 (6.7) .264 (13.1) .516 (5.1) .201 2 (12.7) .500 2 (0.36) .014 (5.6) .220 (7.9) Typ .311 3 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 H (1.6) Typ .063 3 (3.8) .150 Pushbuttons (1.8) Dia Typ .073 Actuator in LEFT Position (4.7) Typ .185 MS12ASG13 Straight PC Terminals with Bracket (3.2) .126 3 6 2 5 1 4 3 5 2 4 1 (1.17) Typ .046 (1.6) Typ .063 (2.4) Typ .095 (1.2) Typ .047 6 (12.7) .500 (0.5) .020 (4.8) .189 (11.9) .469 Actuator in LEFT Position www.nkkswitches.com Slides 5 Tactiles (7.6) .299 6 2 Rotaries (4.8) .189 (11.4) .449 (12.7) .500 CL Touch ON (5.1) .201 3 6 (4.7) Typ .185 (4.8) .189 3 Keylocks (1.17) Typ .046 ON (8.2) .323 (3.8) .150 MS12ANG03 Straight PC Terminals (0.8) Typ .031 (3.8) .150 (1.8) Dia Typ .073 (0.5) .020 (1.17) .046 Indicators (5.1) .201 1 1 (4.8) .189 (6.4) (6.35) .252 .250 (4.7) Typ .185 Programmable Illuminated PB ON ON (4.7) Typ .185 2 (12.7) .500 2 (3.8) .150 (6.6) .260 3 3 (7.9) Typ .311 (4.7) Typ .185 Accessories (3.8) .150 Straight PC Terminals Rockers Single Pole (1.8) Dia Typ .073 (1.5) Dia Typ .059 MS22BSG13 H35 Supplement Series MS Toggles Miniature Slides TYPICAL SWITCH DIMENSIONS Single Pole Rockers Right Angle PC Terminals (5.1) .201 (3.8) .150 (12.7) .500 1 Pushbuttons (3.8) .150 (5.7) .224 Programmable Illuminated PB MS12ASG30 (1.2) .047 (9.53) .375 (1.27) .050 (1.8) Dia Typ .073 (4.7) Typ .185 3 (6.6) .260 (3.2) (3.81) .126 .150 (0.4) Typ .016 (13.2) .520 2 3 2 (9.53) .375 (0.8) Typ .031 (4.7) Typ .185 (0.5) .020 Double Pole (3.8) .150 (5.1) .201 (3.8) .150 (12.7) .500 4 5 6 Keylocks 6 (8.2) .323 (3.8) .150 (0.4) Typ .016 (13.2) .520 (6.2) .245 (1.2) .047 (12.7) .500 (5.7) .224 (13.2) .520 MS22BSG30 (11.4) .449 (3.2) .126 (0.5) .020 1 Tactiles Tilt (0.8) Typ .031 (4.7) Typ .185 (1.5) Dia Typ .059 (6.6) Typ .260 3 3 ON (0.4) .016 (10.16) .400 (3.81) Typ .150 2 (12.7) .500 2 (6.9) .270 1 1 (10.16) .400 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 (6.6) .260 (1.27) .050 (0.5) .020 (4.45) Typ .175 (1.5) Dia Typ .059 Actuator in LEFT Position Vertical PC Terminals Double Pole (3.8) .150 (5.1) .201 (11.4) .449 ON (8.2) .323 (3.8) .150 (1.2) Typ .047 (4.45) .175 (1.2) Typ .047 (4.45) .175 (6.9) .270 ON Touch (12.7) .500 (1.8) Dia Typ .073 (5.3) .209 MS12ASG40 Indicators (3.81) .150 1 3 (5.1) .201 (1.2) Typ .047 (4.45) .175 Accessories 2 3 Single Pole (3.8) .150 (3.8) .150 Supplement (1.8) Dia Typ .073 (4.7) Typ .185 5 4 Actuator in LEFT Position Vertical PC Terminals H36 2 (1.27) Typ .050 (3.81) .150 ON Slides Rotaries (0.4) Typ .016 MS22BSG40 (6.6) Typ .260 (1.5) Dia Typ .059 Actuator in LEFT Position Right Angle PC Terminals H 1 (5.3) .209 (0.4) .016 (12.7) .500 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 Actuator in LEFT Position www.nkkswitches.com (0.5) .020 6 3 5 2 4 3 (12.7) .500 (1.8) Dia Typ .073 (4.8) .189 6 2 5 1 4 (3.81) Typ .150 1 (1.27) Typ .050 (4.8) .189 (12.7) .500 (4.45) Typ .175 (1.5) Dia Typ .059