MS13ANA

Miniature Slides Series MS Distinctive Characteristics Available in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability. Antijamming design protects contacts from damage due to excessive downward force on the actuator. High internal barriers between poles and insulating sheet between case and actuator block give added protection to contacts. Specially composed silver alloy contacts for power applications or gold contacts for logic level applications give high contact reliability. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of frame to case well above base and terminals provides 1,500V dielectric strength. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS General Specifications Electrical Capacity (Resistive Load) Power Level (code W): Logic Level (code G): Logic/Power Level (code A): 6A @ 125V AC or 3A @ 250V AC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines W & G ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Total Travel: 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Nonshorting (break-before-make) On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm) Materials & Finishes Actuator: Frame: Dust Cover: Case: Movable Contacts: Stationary Contacts: Terminals: Glass fiber reinforced polyester Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount Phosphor bronze with nickel plating Glass fiber reinforced diallyl phthalate resin (UL94V-0) Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver capped copper with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Cleaning: Wave Soldering recommended (PC Mount). See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL Recognized: C-UL Recognized: R CSA Certified: UL94V-0 rated case All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. All Double Throw & 3 Throw models certified at 6A @ 125V AC, 3A @ 250V AC, & 0.4VA maximum @ 28V DC; CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides TYPICAL SWITCH ORDERING EXAMPLE Series MS MS 1 2 A S G 30 POLES 1 2 SPDT DPDT SP3T F N TERMINALS MOUNTING Panel Mount (Terminal 01 only) PCB Mount (Terminal 03 only) Bracket Mount (Terminals 13, 30, & 40 only) 01 03 13 30 40 Solder Lug Straight PC Straight with Bracket Right Angle PC Vertical PC CIRCUITS 2 3 0 ON ON ON NONE OFF ON ON ON ON S CONTACT MATERIALS & R ATINGS ACTUATORS A B .150” (3.8mm) Wide for Single or Double Pole .323” (8.2mm) Wide for Double Pole W G A Silver; Rated 6A @ 125V AC & 3A @ 250V AC Gold; Rated 0.4VA max. @ 28V AC/DC max. Gold over Silver; Rated 6A @ 125V AC & 0.4VA max. @ 28V AC/DC max. IMPORTANT: Switches are supplied without UL, C-UL & CSA markings unless specified. Specific models & ratings are noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE MS12ASG30 .150” (3.8mm) Wide Actuator SPDT ON-NONE-ON Circuit Gold Contacts with 0.4VA Rating Right Angle PC Terminals with Support Bracket N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides POLES & CIRCUITS Slide Position Left Pole SP Model MS12 MS13 MS22 MS23 ON ON ON ON NONE OFF NONE OFF ON ON ON ON 2-1 OPEN 2-3 SPDT Center Right Connected Terminals Left Center Right Note: Series MS Throw & Schematics Terminal numbers are not actually on the switch. 2 (COM) 1 2 1 (COM) 3 4 3 5 6 DP 2-1 5-4 OPEN 2-3 5-6 DPDT For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Left ON External Connection 5 2 (in) Center ON External Connection 5 2 (in) Right ON External Connection 5 2 (in) External Connection The SP3T model utilizes a double pole base. (out) SP MS20 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) 2-1 5-4 2-3 5-4 2-3 5-6 External connections must be made during field installation. External Conn 6 5 4 3 2 1 Common (in) (out) (out) ACTUATORS A .150” (3.8mm) Wide for Single Pole .150” (3.8mm) Wide for Double Pole B .323” (8.2mm) Wide for Double Pole Only (8.2) .323 (3.8) .150 (3.8) .150 (3.8) .150 (3.8) .150 (3.8) .150 CONTACT MATERIALS & RATINGS W G Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: Complete explanation of operating range in Supplement section. A Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides MOUNTING TYPES & TERMINALS F Panel Mount (Combines with Solder Lug Terminal 01 only) (2.4) Dia Typ .094 (2.4) Dia Typ .094 Series MS Straight PC Mount (Combines with Straight PC Terminal 03 only) N A A (17.53) .690 (17.53) .690 Dimension A = .268” (6.8mm) for on-none-on .319” (8.1mm) for on-off-on & on-on-on Maximum Panel Thickness: .197” (5.0mm) (4.19) .165 (9.0) .354 SP or DP with .150” (3.8mm) Actuator DP only with .323” (8.2mm) Actuator S Support Bracket Mount (For Terminals 13, 30, & 40) Maximum Panel Thickness: For Straight PC with Bracket Terminal 13: .197” (5.0mm) For Angle Mount Terminals 30 & 40: .177” (4.5mm) 01 Solder Lug Epoxy Seal (2.0) .079 (4.0) .157 03 Straight PC Epoxy Seal (6.35) (4.8) .250 .189 13 30 40 Straight PC with Bracket Right Angle PC Vertical PC (2.0) (1.1) .079 .043 Thk = (0.8) .031 (1.17) .046 Thk = (0.8) .031 TYPICAL SWITCH DIMENSIONS Solder Lug Terminals (1.2) R Typ .047 Single Pole (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (17.53) .690 (19.6) .772 ON 3 2 ON (3.8) Sq .150 (4.7) Typ .185 (12.7) .500 1 (6.1) .240 (6.6) .260 (0.4) .016 (5.1) (6.4) (4.5) .201 .252 .177 (0.5) .020 (0.5) .020 (2.0) .079 MS12AFW01 Actuator in LEFT Position Solder Lug Terminals (1.2) R Typ .047 Double Pole (1.2) R Typ .047 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (17.53) .690 (19.6) .772 (17.53) .690 (19.6) .772 ON 6 5 ON 3 2 (2.0) Typ .079 (3.8) .150 (4.7) Typ .185 (12.7) .500 4 1 (3.8) .150 (6.1) .240 (6.1) .240 (8.2) .323 (5.1) .201 (0.5) (0.4) .020 .016 (7.6) (4.5) .299 .177 (4.8) .189 (11.4) .449 (0.5) .020 MS22BFW01 Actuator in LEFT Position 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Miniature Slides TYPICAL SWITCH DIMENSIONS Straight PC Terminals Single Pole (0.8) Typ .031 ON 3 2 ON Series MS 3 (3.8) Sq .150 (4.7) Typ .185 (12.7) .500 2 1 (4.7) Typ .185 (1.8) Dia Typ .073 1 (6.6) .260 (4.8) .189 (5.1) (6.4) (6.35) .201 .252 .250 (0.5) .020 (1.17) .046 MS12ANG03 Actuator in LEFT Position Straight PC Terminals Double Pole (0.8) Typ .031 ON 6 5 ON (1.17) Typ .046 3 2 3 2 1 (4.8) .189 6 5 4 (3.8) .150 (4.7) Typ .185 (12.7) .500 (4.7) Typ .185 4 1 (1.8) Dia Typ .073 (3.8) .150 (8.2) .323 (5.1) .201 (7.6) .299 (4.8) .189 (6.35) .250 (4.8) .189 (11.4) .449 (0.5) .020 MS22BNG03 Actuator in LEFT Position Straight PC Terminals with Bracket (3.8) .150 Single Pole (4.8) .189 (0.4) Typ .016 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 (3.2) .126 (1.2) Typ .047 3 (1.6) Typ .063 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 ON 3 2 ON (3.8) .150 (12.7) .500 2 1 1 (0.36) .014 (5.6) .220 (5.1) .201 (6.7) .264 (13.1) .516 (7.1) .280 (0.5) .020 (1.17) .046 MS12ASG13 Actuator in LEFT Position Straight PC Terminals with Bracket (3.8) .150 (8.2) .323 Double Pole (4.8) .189 (0.4) Typ .016 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 (3.2) .126 (1.2) Typ .047 3 2 3 (1.6) Typ .063 (2.4) Typ .095 6 5 4 ON 6 5 ON (3.8) .150 (12.7) .500 2 1 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 4 1 (0.36) .014 (10.4) .409 (10.4) .409 (5.1) .201 (6.7) .264 (14.3) .563 (1.17) Typ .046 (0.5) .020 (4.8) .189 (11.9) .469 C L MS22BSG13 Actuator in LEFT Position 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Miniature Slides TYPICAL SWITCH DIMENSIONS Right Angle PC Terminals Single Pole (5.1) .201 1 Series MS (12.7) .500 2 3 (3.8) Sq .150 (3.2) (3.81) .126 .150 (1.2) .047 (9.53) .375 (1.27) .050 (0.5) .020 (6.6) .260 3 2 (1.8) Dia Typ .073 (4.7) Typ .185 1 (9.53) .375 (0.8) Typ .031 (4.7) Typ .185 (6.6) Typ .260 (0.4) Typ .016 (13.2) .520 (5.7) .224 (1.5) Dia Typ .059 MS12ASG30 Actuator in LEFT Position Right Angle PC Terminals (3.8) .150 (3.8) .150 Double Pole (5.1) .201 4 (12.7) .500 5 6 6 (1.8) Dia Typ .073 (4.7) Typ .185 5 4 2 1 (3.8) .150 (8.2) .323 (6.2) .245 (3.2) .126 (0.5) .020 (11.4) .449 1 2 3 3 (3.81) .150 (12.7) .500 (0.4) Typ .016 (13.2) .520 (0.4) Typ .016 (13.2) .520 (5.7) .224 (1.2) .047 (12.7) .500 (1.27) Typ .050 (3.81) .150 (0.8) Typ .031 (4.7) Typ .185 (1.5) Dia Typ .059 (6.6) Typ .260 MS22BSG30 Actuator in LEFT Position Vertical PC Terminals Single Pole (5.1) .201 ON 3 2 3 (1.8) Dia Typ .073 (12.7) .500 2 1 ON (3.8) Sq .150 (3.81) Typ .150 (6.9) .270 1 (10.16) .400 (1.2) Typ .047 (4.45) .175 (5.3) .209 (0.4) .016 (10.16) .400 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 (6.6) .260 (1.27) .050 (0.5) .020 (4.45) Typ .175 (1.5) Dia Typ .059 MS12ASG40 Actuator in LEFT Position Vertical PC Terminals (3.8) .150 (8.2) .323 Double Pole (5.1) .201 ON 6 5 (11.4) .449 3 2 (0.5) .020 3 (1.8) Dia Typ .073 (4.8) .189 6 5 4 ON (3.8) .150 (6.9) .270 (12.7) .500 2 1 (3.81) Typ .150 4 1 (1.2) Typ .047 (4.45) .175 (1.2) Typ .047 (4.45) .175 (5.3) .209 (0.4) .016 (12.7) .500 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 (1.27) Typ .050 (4.8) .189 (12.7) .500 (4.45) Typ .175 (1.5) Dia Typ .059 MS22BSG40 Actuator in LEFT Position 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com