S116

Low Capacity Standard Size Toggles GENERAL SPECIFICATIONS FOR S100s Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following table 10 milliohms maximum 200 megohms minimum @ 500V DC 1,500V AC minimum for 1 minute minimum 30,000 operations minimum 10,000 operations minimum –10°C through +70°C (+14°F through +158°F) Brass with chrome plating Brass with chrome or nickel plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy plus copper with silver plating Copper with silver plating 2.94Nm (26 lb•in) for double nut Manual Soldering: See Profile A in Supplement section. Series S Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Operating Temp Range: Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor Plate: Movable & Stationary Contacts: Terminals: Mounting Torque: Soldering Time & Temperature: Installation Standards & Certifications CSA Certified: Certified at 5A @ 125V AC & 2A @ 250V AC; CSA File No. 023535-0-000. Add “/C” to end of part number to order CSA mark on switch. S114, S116, & S116R Toggle Position/Connected Terminals Down Model S114 S116 S116R Approvals — — — — DPST 1 Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 Angle of Throw Pole & Throw DPST DPDT DPDT 2 Keyway ON ON ON (COM) 4 2-1 5-4 2-1 5-4 2-1 5-4 5 NONE NONE NONE DPDT OFF ON ON 2 1 — 2-3 5-6 2-3 5-6 (COM) 3 4 5 5A 5A 5A 2A 2A 2A 5A 5A 5A 3A 3A 3A 25° 25° 25° Throw & Schematics: 6 Note: Terminal numbers are actually on the switch • Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. S114 & S116 Keyway M12 P1 (2.0) Dia Typ .079 (10.35) Typ .407 (4.0) .157 (2.3) Dia .090 (3.8) Typ .150 S116R Black Polyamide Paddle (9.0) .354 6 5 4 3 2 1 (12.5) Dia .492 (27.8) 1.094 (1.5) .060 (0.8) Typ .031 (11.5) .453 25° (6.0) Dia .236 (17.6) .693 (18.0) .709 (10.0) .394 (22.9) .902 (5.5) .217 (4.0) .157 (29.0) 1.142 (0.3) Typ .012 S116 S114 does not have terminals 3 & 6 Maximum Panel Thickness: .158” (4.0mm) 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com