S1AW-WL

Series S Medium Capacity Standard Size Toggle with Wire Leads S1AW-WL Shrink Tubing Red (17.0) Dia .669 Red Flat 3 (30.0) 1.181 (10.9) .429 (5.7) Dia .224 1 (18.0) .709 White White M12 P1 (19.05) .750 (7.5) .295 (12.5) .492 (17.5) .689 Dimensions in mm/inch (304.8) 12.00 (18.0) .709 SINGLE POLE SOLDER LUG WITH PANEL SEAL Electrical Capacity Toggle Position/Connected Terminals Base Switch Pole & Throw S1AW SPST Down Center Up Resistive Flat ON 1-3 NONE SPST Throw & Schematics: 1 OFF 3 Panel Cutout — AC 125V AC 250V DC 30V (11.1) .437 15A 6A 20A (12.5) Dia .492 Note: Terminal numbers are actually on the switch INTERNAL CONNECTION Wiring Wire Specifications Maximum Panel Thickness: .158” (4.0mm) Standard Hardware AT503M Hex Face Nut 600V Temperature Range: –40°C ~ +105°C (–40°F ~ +221°F) 14 AWG Stripped Wire Ends 1/4” AT537 O-ring No. of Wires Terminal 1 Terminal 2 Terminal 3 UL1015 2 White ––– Red AT508 Lockwasher Base Switch Specifications Electrical Capacity (Resistive & Inductive Load) Power Level: 15A @ 125V AC or 6A @ 250V AC or 20A @ 30V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum 24° Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Environmental Data Operating Temperature Range: –30°C ~ +70°C (–22°F ~ +158°F) Sealing: Splashproof panel seal model meets IP67 standard Installation Mounting Torque: 1.47Nm (13 lb•in) www.nkkswitches.com 03/01/18