S28AW45

Series S IP67 Rated Toggle with 45mm Lever S28AW45 Bushing Mount • Double Pole • Solder Lug Dimensions in mm/inch (2.4) Dia Typ .094 (17.0) Dia .669 Flat 6 (10.9) .429 3 (31.2) 1.228 (4.8) Typ .189 22° (5.7) .224 5 2 4 1 M12 P1 (18.6) .732 (7.5) .295 (12.5) .492 (45.0) 1.772 (5.7) .224 (25.7) 1.012 (0.8) Typ .031 PANEL CUTOUT BASE SWITCH Part Number Maximum Panel Thickness: .158” (4.0mm) Maximum S28AW (11.1) .437 (12.5) Dia .492 STANDARD HARDWARE Hexagon Face Nut Internal Tooth Lockwasher AT537 O-ring (12.1) .476 M12 P1 (14.0) .551 (12.5) Dia .492 (15.5) Dia .610 (15.8) Dia .622 (13.8) Dia .543 (0.5) .020 (1.0) .039 (2.4) .094 1 included with each switch Material: Brass with tin-cobalt alloy plating (1.5) .059 1 included with each switch Material: Phosphor bronze with chrome plating 1 included with each switch Material: Nitrile butadiene rubber POLE & CIRCUIT Toggle Position/ Connected Terminals ( ) = Momentary Down Pole Model DP S28AW Center Throw & Schematics Up Note: Terminal numbers are actually on the switch. Flat (ON) 2-3 5-6 OFF (ON) 2-1 5-4 DPDT 2 3 (COM) 1 5 6 4 CONTACT MATERIALS & RATINGS Silver over Silver Power Level www.nkkswitches.com 15A @ 125V AC & 6A @ 250V AC 1 02/27/20 Series S IP67 Rated Toggle with 45mm Lever Base Switch Specifications Electrical Capacity (Resistive & Inductive Load) Power Level: 15A @ 125V AC & 6A @ 250V AC; 20A @ 30V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 30,000 operations minimum 25,000 operations minimum 22° Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Environmental Data Operating Temperature Range: –30°C through +70°C (–22°F through +158°F) Front Panel Sealing: IP67 of IEC 60529, dust tight & water protected during temporary immersion Installation Mounting Torque: 1.47Nm (13 lb•in) for single nut Soldering Time & Temperature: Manual Soldering: 390°C maximum for 4 seconds maximum, 2 cycles www.nkkswitches.com 2 02/27/20