S331

Rockers Toggles Series S A GENERAL SPECIFICATIONS FOR S301 ~ S339 Electrical Capacity (Resistive & Inductive Load) Power Level: Rotaries Keylocks Programmable Illuminated PB Pushbuttons Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): Slides Tilt 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 6,000 operations minimum for S331F; 15,000 operations minimum for all other S331s; 25,000 operations minimum for all others Shown on following tables Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable & Stationary Contacts: Terminals: PBT for flatted lever; brass with chrome plating for all others Brass with chrome plating Melamine phenol Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Environmental Data Operating Temperature Range: –10°C ~ +70°C (+14°F ~ +158°F) Installation Mounting Torque: 2.94Nm (26 lb•in) for double nut; 1.47Nm (13 lb•in) for single nut Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications UL: CSA: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” to end of part number to order UL recognized switch. UL or cULus recognition designated beside part numbers on following pages. See Supplement section to find UL or cULus rating details. File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details Supplement Accessories Indicators Touch Shown in the following tables Other Ratings Tactiles Medium/High Capacity Standard Size Toggles A108 www.nkkswitches.com A SINGLE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary AC 250V DC 30V AC 125V PF 0.6 Angle of Throw S301 SPST ON 1-3 NONE OFF — 15A 6A 20A 10A 32° S302 SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 10A 32° S303 SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 10A 32° S305 –– –– SPDT ON 2-3 NONE (ON) 2-1 15A 6A 20A 8A 32° S308 –– –– SPDT (ON) 2-3 OFF (ON) 2-1 15A 6A 20A 8A 32° S309 –– –– SPDT ON 2-3 OFF (ON) 2-1 15A 6A 20A 8A 32° Throw & Schematics: SPST 1 3 2 (COM) INTERNAL CONNECTION SPDT 3 Note: Terminal numbers are actually on the switch 1 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (3.2) Dia Typ .126 3 (6.0) Typ .236 32° (17.5) .689 (16.0) .630 2 (12.0) .472 (17.4) .685 (9.0) .354 1 (1.6) Typ .063 (6.1) Dia .240 (12.5) Dia .492 (28.5) 1.122 (9.6) Max .378 Keylocks M12 P1 (3.0) Dia .118 Maximum Panel Thickness: .185” (4.7mm) S301 does not have terminal 2 Rotaries Keyway S301 Toggle Position/Connected Terminals ( ) = Momentary Down *Approvals Model Pole & Throw R R C US Center Slides DOUBLE POLE WITH SOLDER LUG * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Electrical Capacity Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw S331 DPST ON 1-3 4-6 NONE OFF 25A 25A 25A 10A 25° S332 DPDT ON 2-3 5-6 NONE ON 2-1 5-4 25A 15A 25A 10A 25° S333 DPDT ON 2-3 5-6 OFF ON 2-1 5-4 25A 15A 25A 10A 30° S335 DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 6A 20A 8A 25° — S338 –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° S339 –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° DPST 1 3 4 6 INTERNAL CONNECTION DPDT 3 (COM) 1 5 6 4 Note: Terminal numbers are actually on the switch Touch Throw & Schematics: 2 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (2.4) Dia Typ .094 M12 P1 6 (33.2) 1.307 (4.8) Typ .189 α (12.5) Dia .492 3 5 2 4 1 (9.0) .354 (5.7) .224 (17.5) .689 (12.0) .472 (25.1) .988 S331 does not have terminals 2 & 5 www.nkkswitches.com Maximum Panel Thickness: .185” (4.7mm) Supplement (3.0) Dia .118 (6.1) Dia .240 (19.0) .748 Accessories Keyway Rockers Inductive AC 125V Pushbuttons US Resistive Up Programmable Illuminated PB C R Center Keyway Tactiles Model Down Pole & Throw R Tilt *Approvals Electrical Capacity Indicators * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Toggles Series S Medium/High Capacity Standard Size Toggles S331 A109 Medium/High Capacity Standard Size Toggles A DOUBLE POLE WITH SOLDER LUG & FLATTED LEVER * UL & cULus recognized only when ordered with marking on switch (see General Specs) Rockers Toggles Series S *Approvals Down Pole & Throw R Pushbuttons Model R C US Center Electrical Capacity Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw S331R –– DPST ON 1-3 4-6 NONE OFF — 25A 25A 25A 10A 25° S332R –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 25A 15A 25A 10A 25° S333R –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 25A 15A 25A 10A 30° S338R –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° S339R –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° Throw & Schematics: DPST 1 3 4 6 2 DPDT INTERNAL CONNECTION 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch 4 Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keylocks Programmable Illuminated PB Toggle Position/Connected Terminals ( ) = Momentary (2.4) Dia Typ .094 Keyway M12 P1 6 Rotaries α (4.0) .157 Slides (9.0) .354 (12.0) .472 5 2 4 1 (25.1) .988 (9.0) .354 (5.7) .224 (19.0) .748 S331R does not have terminals 2 & 5 Supplement Accessories Indicators Touch Tilt Tactiles S331R A110 (33.2) 1.307 (3.0) Dia .118 (8.15) .321 (27.0) 1.063 (12.5) Dia .492 3 (4.8) Typ .189 www.nkkswitches.com Maximum Panel Thickness: .220” (5.6mm) A SINGLE POLE WITH SCREW LUG Toggle Position/Connected Terminals ( ) = Momentary AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw S301T SPST ON 1-3 NONE OFF — 15A 6A 20A 10A 32° S302T SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 10A 32° S303T SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 10A 32° S305T –– –– SPDT ON 2-3 NONE (ON) 2-1 15A 6A 20A 8A 32° S308T –– –– SPDT (ON) 2-3 OFF (ON) 2-1 15A 6A 20A 8A 32° S309T –– –– SPDT ON 2-3 OFF (ON) 2-1 15A 6A 20A 8A 32° Throw & Schematics: SPST 1 3 2 (COM) SPDT INTERNAL CONNECTION 3 Note: Terminal numbers are actually on the switch 1 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. Keyway M12 P1 M3.5 P0.5 (28.5) 1.122 (9.0) .354 (5.0) Typ .197 (17.5) .689 (16.0) .630 (17.4) .685 (12.0) .472 (3.0) Dia .118 (9.6) Max .378 S301T does not have terminal 2 Maximum Panel Thickness: .185” (4.7mm) Rotaries (6.1) Dia .240 Keylocks (12.5) Dia .492 (6.0) Typ .236 32° S301T Toggle Position/Connected Terminals ( ) = Momentary Down *Approvals Pole & Throw R Model R C US Center Slides DOUBLE POLE WITH SCREW LUG * UL & cULus recognized only when ordered with marking on switch (see General Specs) Electrical Capacity Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw S331T –– DPST ON 1-3 4-6 NONE OFF 15A 15A 15A 10A 25° S332T –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 15A 15A 15A 10A 25° S333T –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 15A 15A 15A 10A 30° S335T –– DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 6A 20A 8A 25° S338T –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° S339T –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 8A 25° DPST 1 3 4 6 2 DPDT INTERNAL CONNECTION 3 (COM) 1 5 6 4 Note: Terminal numbers are actually on the switch Touch Throw & Schematics: — Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. M3.5 x 5 (6.6) .260 25° 6 3 5 2 4 1 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 (6.1) Dia .240 (19.0) .748 Accessories M12 P1 (6.6) .260 (17.5) .689 (12.0) .472 (26.0) 1.024 (1.0) Typ .039 S331T does not have terminals 2 & 5 www.nkkswitches.com Maximum Panel Thickness: .185” (4.7mm) Supplement Keyway Rockers US Inductive Pushbuttons C R Resistive Up Programmable Illuminated PB R Center Keyway Tactiles Model Pole & Throw Tilt Down *Approvals Electrical Capacity Indicators * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Toggles Series S Medium/High Capacity Standard Size Toggles S331T A111 Toggles Series S Medium/High Capacity Standard Size Toggles A SINGLE POLE WITH QUICK CONNECT Model Pole & Throw R R C US S301F SPST ON 1-3 1 3 NONE OFF — Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw 15A 6A 20A 10A 32° Note: Terminal numbers are actually on the switch INTERNAL CONNECTION (1.5) Dia Typ .060 Keyway M12 P1 (0.8) Typ .031 3 (12.5) Dia .492 (28.5) 1.122 32° (9.0) .354 1 (6.1) Dia .240 (17.5) .689 (16.0) .630 Rotaries Slides Tactiles Tilt Resistive Up Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (12.0) .472 (6.35) Typ .250 (7.5) Typ .295 (9.42) .371 (11.0) .433 (17.4) .685 (3.0) Dia .118 Maximum Panel Thickness: .185” (4.7mm) S301F DOUBLE POLE WITH QUICK CONNECT Toggle Position/Connected Terminals ( ) = Momentary * UL & cULus recognized only when ordered with marking on switch (see General Specs) Down *Approvals Model Pole & Throw R R C US Center Electrical Capacity Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw S331F –– DPST ON 1-3 4-6 NONE OFF 25A 25A 25A 10A 25° S332F –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 25A 15A 25A 10A 25° S333F –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 25A 15A 25A 10A 30° S335F –– DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 6A 20A 8A 25° Throw & Schematics: DPST 1 3 4 6 INTERNAL CONNECTION — 2 DPDT 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch 4 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (7.9) .311 Keyway Indicators Touch Center Keyway SPST Throw & Schematics: Electrical Capacity Toggle Position/Connected Terminals Down *Approvals Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) M12 P1 (1.5) Dia Typ .060 (7.5) Typ .295 6 (33.2) 1.307 5 4 Accessories (12.5) Dia .492 3 (6.35) Typ .250 α 2 1 (6.1) Dia .240 Supplement (19.0) .748 (11.7) .461 (17.5) .689 (12.0) .472 S332F A112 (9.0) .354 (3.0) Dia .118 (30.3) 1.193 (0.8) Typ .031 S331F does not have terminals 2 & 5 www.nkkswitches.com Maximum Panel Thickness: .185” (4.7mm) Series S A GENERAL SPECIFICATIONS FOR S31 ~ S49 Rockers Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum Shown on following tables Programmable Illuminated PB Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): Pushbuttons Other Ratings Materials & Finishes Keylocks PBT resin for flatted lever; brass with chrome plating for all others Brass with chrome plating Phenolic resin Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Rotaries Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Slides Toggles Medium/High Capacity Standard Size Toggles Installation Tactiles Mounting Torque: 2.94Nm (26 lb•in) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. Indicators File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” to end of part number to order UL recognized switch. UL or cULus recognition designated beside part numbers on following pages. See Supplement section to find UL or cULus rating details. Supplement Accessories UL: Touch Tilt Standards & Certifications www.nkkswitches.com A113 Medium/High Capacity Standard Size Toggles A THREE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) *Approvals Model C R Down Pole & Throw R US Center Electrical Capacity Resistive Up Keyway AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw 3PST ON 1-3 4-6 7-9 NONE OFF 25A 9A 20A 10A 25° S32 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 25A 9A 20A 10A 25° S33 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 25A 9A 20A 10A 30° S35 3PDT ON 2-3 5-6 8-9 NONE (ON) 2-1 5-4 8-7 15A 6A 20A 8A 25° S38 3PDT (ON) 2-3 5-6 8-9 OFF (ON) 2-1 5-4 8-7 15A 6A 15A 8A 25° S39 3PDT ON 2-3 5-6 8-9 OFF (ON) 2-1 5-4 8-7 15A 6A 15A 8A 25° Throw & Schematics: 3PST 1 3 4 6 7 2 3PDT INTERNAL CONNECTION 9 — 3 5 1 (COM) 6 4 M12 P1 Note: Terminal numbers are on the switch 7 6 (0.8) Typ .031 9 (4.8) Typ .189 α 3 5 8 (9.0) .354 1 (3.0) Dia .118 4 (6.1) Dia .240 (30.0) 1.181 S32 (12.5) Dia .492 (33.8) 1.331 2 7 Rotaries Slides Tactiles 9 (2.4) Dia Typ .094 Keyway (17.5) .689 (12.0) .472 Maximum Panel Thickness: .181” (4.6mm) S31 does not have terminals 2, 5, & 8 (27.3) 1.075 FOUR POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Model Suffix R = Flatted Lever *Approvals C R Down Pole & Throw R US Center Electrical Capacity Resistive Up Keyway AC 125V AC 250V DC 30V Inductive α= Angle AC 125V of Throw PF 0.6 S41/S41R 4PST ON 1-3 4-6 7-9 10-12 NONE OFF 25A 9A 20A 10A 25° S42/S42R 4PDT ON 2-3 5-6 8-9 11-12 NONE ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 25° S43/S43R 4PDT ON 2-3 5-6 8-9 11-12 OFF ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 30° –– 4PDT ON 2-3 5-6 8-9 11-12 NONE (ON) 2-1 5-4 8-7 11-10 15A 6A 20A 8A 25° S48/S48R –– 4PDT (ON) 2-3 5-6 8-9 11-12 OFF (ON) 2-1 5-4 8-7 11-10 15A 6A 20A 8A 25° S49/S49R –– 4PDT ON 2-3 5-6 8-9 11-12 OFF (ON) 2-1 5-4 8-7 11-10 15A 6A 20A 8A 25° S45 Tilt 8 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (5.0) .197 – Throw & Schematics: Touch Inductive AC 125V S31 Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series S 4PST 1 3 4 6 7 9 10 12 INTERNAL CONNECTION 4PDT 3 — (COM) 5 2 1 9 4 6 11 8 7 12 10 Note: Terminal numbers are on the switch Notes: Standard Hardware for Bat Lever: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut; for Flatted Lever (R): AT504M Knurled Face Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies (only for bat lever models): AT401 & AT4181 boots plus hex nut and o-ring. See Accessories & Hardware section. Indicators (12.5) Dia .492 M12 P1 (0.8) Typ .031 Accessories (11.5) .453 (2.4) Dia Typ .094 Keyway (1.5) .060 12 6 11 10 (4.0) .157 Supplement (9.0) .354 S42R A114 (8.15) .321 (27.0) 1.063 3 8 (4.8) Typ .189 α 9 7 5 2 4 1 (34.2) 1.346 Bat lever dimensions are same as on S30 models above. (27.1) 1.067 (36.5) 1.437 S41 and S41R do not have terminals 2, 5, 8, & 11. www.nkkswitches.com (12.5) Dia .492 (9.0) .354 (5.8) .228 (12.0) .472 Max. Panel Thickness: .220” (5.6mm) (3.0) Dia .118 Max. Panel Thickness: .181” (4.6mm) A THREE POLE WITH SCREW LUG C R US Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle AC 250V PF 0.6 of Throw S31T 3PST ON 1-3 4-6 7-9 NONE OFF 25A 9A 20A 10A 5A 25° S32T 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 25A 9A 20A 10A 5A 25° S33T 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 25A 9A 20A 10A 5A 30° 3PST Throw & Schematics: 1 3 4 6 7 9 — 3PDT INTERNAL CONNECTION 2 5 3 1 (COM) 6 4 8 9 Note: Terminal numbers are on the switch 7 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. Keyway M12 P1 M3.5 x 5 6 3 (12.5) Dia .492 (33.8) 1.331 25° 5 8 (9.0) .354 2 7 1 Keylocks 9 (3.0) Dia .118 4 (6.1) Dia .240 Rockers Model Pole & Throw Pushbuttons Down *Approvals R Electrical Capacity Toggle Position/Connected Terminals Programmable Illuminated PB * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Toggles Series S Medium/High Capacity Standard Size Toggles (30.0) 1.181 (17.5) .689 (12.0) .472 Maximum Panel Thickness: .181” (4.6mm) (29.8) 1.173 S31T does not have terminals 2, 5, & 8 Rotaries (7.5) .295 S32T R C R US Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 AC 250V PF 0.6 α= Angle of Throw S41T 4PST ON 1-3 4-6 7-9 10-12 NONE OFF — 25A 9A 20A 10A 5A 25° S42T 4PDT ON 2-3 5-6 8-9 11-12 NONE ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 5A 25° S43T 4PDT ON 2-3 5-6 8-9 11-12 OFF ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 5A 30° Throw & Schematics: 4PST 1 4PDT 3 4 6 7 9 10 12 INTERNAL CONNECTION 3 (COM) 5 2 1 4 6 11 8 9 7 12 10 Note: Terminal numbers are on the switch Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. M12 P1 12 9 6 (34.2) 1.346 11 10 (12.5) Dia .492 3 8 25° 7 5 2 4 1 Indicators M3.5 x 5 (9.0) .354 Accessories Keyway (3.0) Dia .118 (6.1) Dia .240 (17.5) .689 (12.0) .472 (29.6) 1.165 (36.5) 1.437 S41T does not have terminals 2, 5, 8, & 11 www.nkkswitches.com Maximum Panel Thickness: .181” (4.6mm) Supplement (8.3) .327 (38.0) 1.496 Tactiles Model Down Pole & Throw Tilt *Approvals Electrical Capacity Toggle Position/Connected Terminals Touch * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Slides FOUR POLE WITH SCREW LUG S42T A115 Toggles Series S Medium/High Capacity Standard Size Toggles A THREE POLE WITH QUICK CONNECT Programmable Illuminated PB Pushbuttons Rockers * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Down *Approvals Model Pole & Throw R C R US Electrical Capacity Toggle Position/Connected Terminals Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw 25A 9A 20A 10A 25° S31F 3PST ON 1-3 4-6 7-9 NONE OFF S32F 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 25A 9A 20A 10A 25° S33F 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 25A 9A 20A 10A 30° Throw & Schematics: 3PST 1 3 4 6 7 9 — 2 3PDT INTERNAL CONNECTION 3 5 1 (COM) 6 4 8 9 Note: Terminal numbers are on the switch 7 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (7.9) .311 Keyway (1.5) Dia Typ .060 (7.5) Typ .295 M12 P1 (33.8) 1.331 5 8 7 (9.0) .354 2 1 (3.0) Dia .118 4 (0.8) Typ .031 (6.1) Dia .240 (12.5) Dia .492 3 (6.35) Typ .250 25° Keylocks 6 9 (11.0) .433 Rotaries (30.0) 1.181 (17.5) .689 (12.0) .472 (33.3) 1.311 S32F Maximum Panel Thickness: .181” (4.6mm) S31F does not have terminals 2, 5, & 8 Slides FOUR POLE WITH QUICK CONNECT * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Down Tilt Tactiles *Approvals Model US Center Resistive Up Keyway Inductive α= AC 125V Angle PF 0.6 of Throw AC 125V AC 250V DC 30V 25A 9A 20A 10A 25° S41F 4PST ON 1-3 4-6 7-9 10-12 NONE OFF S42F 4PDT ON 2-3 5-6 8-9 11-12 NONE ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 25° S43F 4PDT ON 2-3 5-6 8-9 11-12 OFF ON 2-1 5-4 8-7 11-10 25A 9A 20A 10A 30° 4PST Throw & Schematics: 1 4PDT 3 4 6 7 9 10 12 INTERNAL CONNECTION — 5 2 3 1 6 (COM) 9 4 11 8 7 12 10 Note: Terminal numbers are on the switch Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (7.9) .311 Keyway Indicators Touch Pole & Throw R C R Electrical Capacity Toggle Position/Connected Terminals M12 P1 (1.5) Dia Typ .060 (7.5) Typ .295 Accessories 12 11 10 (0.8) Typ .031 (6.0) Dia .236 9 6 5 7 4 (12.5) Dia .492 3 8 (6.35) Typ .250 25° (34.2) 1.346 2 1 (9.0) .354 (3.0) Dia .118 (11.8) .465 Supplement (36.5) 1.437 (17.5) .689 (12.0) .472 S42F A116 www.nkkswitches.com (33.1) 1.303 Maximum Panel Thickness: S41F does not have terminals 2, 5, 8, & 11 .181” (4.6mm) Series S A GENERAL SPECIFICATIONS FOR S421 ~ S429 Power Level: Rockers Electrical Capacity (Resistive & Inductive Load) Shown in the following tables 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 15,000 operations minimum Shown in tables on following pages Programmable Illuminated PB Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): Pushbuttons Other Ratings Materials & Finishes Keylocks Brass with chrome plating Brass with chrome plating Melamine phenol Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Rotaries Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Slides Installation Accessories Indicators Touch Tilt Tactiles Mounting Torque: 2.94Nm (26 lb•in) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Supplement Toggles Medium/High Capacity Standard Size Toggles www.nkkswitches.com A117 DOUBLE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary Pushbuttons Down Approvals Model R Center Up AC 125V AC 250V PF 0.75 - 0.8 AC 125V AC 250V AC 125V α= Angle of Throw –– –– DPST ON 1-3 4-6 NONE OFF — 25A 25A 25A 25A 750W 24° –– –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 25A 25A 25A 25A 750W 24° S423 –– –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 25A 25A 25A 25A 750W 28° S425 –– –– DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° S428 –– –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° S429 –– –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° Throw & Schematics: DPST 1 3 4 DPDT INTERNAL CONNECTION 6 2 (COM) 3 1 5 6 Note: Terminal numbers are on the switch 4 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. Keyway (2.4) Dia Typ .094 M12 P1 (4.8) Typ .189 α Rotaries (6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 6 3 5 4 2 1 (5.7) .224 (25.1) .988 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 Maximum Panel Thickness: .185” (4.7mm) (0.8) Typ .031 S421 does not have terminals 2 & 5 DOUBLE POLE WITH SCREW LUG Slides Tactiles Tilt Motor Load S422 Toggle Position/Connected Terminals ( ) = Momentary Down Approvals Touch Inductive Resistive S421 S422 Indicators Electrical Capacity Keyway Pole & Throw Keylocks Programmable Illuminated PB Medium/High Capacity Standard Size Toggles A Rockers Toggles Series S Model Pole & Throw R Center Electrical Capacity Up Inductive Motor Load PF 0.75 - 0.8 AC 125V AC 250V AC 125V α= Angle of Throw Resistive Keyway AC 125V AC 250V S421T –– –– DPST ON 1-3 4-6 NONE OFF — 20A 20A 20A 20A 750W 24° S422T –– –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 20A 20A 20A 750W 24° S423T –– –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 20A 20A 20A 20A 750W 28° S425T –– –– DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° S428T –– –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° S429T –– –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 15A 15A 15A 400W 24° Throw & Schematics: DPST 1 3 4 6 INTERNAL CONNECTION 2 DPDT 3 (COM) 1 5 6 Note: Terminal numbers are on the switch 4 Notes: Standard Hardware: AT503M Face Hex Nut, AT506M Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. Keyway M4 X 5 M12 P1 6 (12.5) Dia .492 Accessories 3 5 (33.2) 1.307 α 2 4 1 Supplement (6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 (11.0) .433 S421T does not have terminals 2 & 5 S423T A118 (31.1) 1.224 www.nkkswitches.com (9.0) .354 (3.0) Dia .118 Maximum Panel Thickness: .185” (4.7mm)