SK13AEG13

Antistatic Process Sealed Keylocks Series SK Distinctive Characteristics Housing and bushing of high insulating material withstands over 15 kilovolts of electrostatic discharge, thus providing antistatic protection. Totally sealed construction with internal o-ring, with gasket between base and housing, and with insert-molded terminals, gives protection for automated processing techniques. Subminiature size allows high density mounting. Molded-in terminals prevent entry of flux and other contaminants. Crimped bracket legs ensure secure PCB mounting and prevent dislodging during automated wave soldering. Bifurcated, self-wiping contact mechanism provides unequalled logic-level reliability and smoother, positive detent actuation. Detent mechanism, with its spring-operated steel ball, gives distinct feel and crisp actuation for accurate switch setting. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 Antistatic Process Sealed Keylocks Series SK General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Torque: Contact Timing: Angle of Throw: 100 milliohms maximum 100 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 30,000 cycles minimum 20,000 cycles minimum Withstands 15 kilovolts ESD .0002Nm (.0017 lb•in) Break-before-make 45° for 3-position & 5-position Materials & Finishes Key: Housing/Bushing: Base: Rotor & Stopper: Tumbler Plate: Movable Contactor: Stationary Contacts: Terminals: Mounting Bracket: Polyacetal Glass fiber reinforced polyester (PBT) Glass fiber reinforced polyamide Polyacetal Brass Beryllium copper with gold plating Phosphor bronze with gold plating Phosphor bronze with gold plating Steel with tin plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: –25°C through +70°C (–13°F through +158°F) 90 ~ 95% humidity for 240 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications UL Recognition or CSA Certification: The SK Series devices have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 Antistatic Process Sealed Keylocks TYPICAL SWITCH ORDERING EXAMPLE Series SK 13 TERMINALS 13 30 Straight with Bracket Right Angle SK POLES 1 SP3T SP5T 1 3 KEY REMOVABLE A All Positions A E BUSHING E 9mm Diameter Smooth G POSITIONS Code 3 5 Pos. 1 ON ON Pos. 2 ON ON Pos. 3 ON ON Pos. 4 NONE ON Pos. 5 NONE ON CONTACT MATERIAL G Gold Rated 0.4VA @ 28V AC/DC DESCRIPTION FOR TYPICAL ORDERING EXAMPLE SK13AEG13 2 Keys Supplied with each Switch 9mm Diameter Smooth Bushing SP3T ON-ON-ON Circuit Key Removable in Positions 1, 2 & 3 Gold Contacts with 0.4VA Rating Straight PC Terminals with Bracket P OLES, CIRCUITS & KEY-REMOVABLE POSITIONS Pole & Throw Model Key Positions Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 (Terminal numbers are not on switch) Connected Terminals Schematic C1 • = Not Removable = Maximum Arc POS 1 2 3 = Key Removable SP3T SK13A ON ON ON ----- ----- C1-2 C1-3 C1-4 ----- ----2 34 C1 3 SP5T SK15A ON ON ON ON ON C1-1 C1-2 C1-3 C1-4 C1-5 1 2345 2 POS 1 4 5 KEY REMOVABLE A All Positions 45° Angular Throw BUSHING E 9mm Diameter Smooth 02-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Antistatic Process Sealed Keylocks CONTACT MATERIAL & RATING G Gold over Bronze or Copper Logic Level Series SK 0.4VA @ 28V AC/DC maximum TERMINALS 13 Straight PC with Bracket 1 C 5 2 3 4 30 (2.54) Typ .100 Right Angle PC 4 3 2 5 C 1 (2.54) Typ .100 (2.54) Typ .100 (5.08) .200 (1.0) Dia Typ .039 (5.08) .200 (1.0) Dia Typ .039 (2.54) Typ .100 KEY AT4094 Tubular Key Material: Polyacetal (9.0) .354 (3.0) .118 (16.0) .630 (21.6) .850 2 keys provided with each switch TYPICAL SWITCH DIMENSIONS Straight PC with Bracket POS 2 45ϒ 45ϒ POS 1 (10.7) .421 POS 3 POS 2 45ϒ (10.7) .421 POS 1 POS 3 45ϒ POS 4 45ϒ 45ϒ POS 5 (9.0) Dia .354 (10.7) .421 (9.0) .354 (2.0) .079 (6.7) .264 (0.5) Typ .020 (0.6) Typ .024 2 3 (0.7) Typ .028 (0.3) Typ .012 1 C 5 (9.0) Dia .354 (10.7) .421 (18.0) .709 (20.7) .815 (2.54) Typ .100 (3.5) .138 4 (5.08) .200 (10.16) .400 SK13AEG13 3 Position 5 Position On 3-position models terminals 1 & 5 are support pins. Right Angle PC POS 1 POS 1 45ϒ (12.0) .472 (4.0) .157 (0.5) Typ .020 (6.65) .262 POS 2 45ϒ POS 3 (4.0) .157 (0.5) Typ .020 (9.0) Dia .354 (10.16) .400 POS 5 (9.0) Dia .354 (10.16) .400 (2.0) .079 (18.0) .709 (12.0) .472 (6.65) .262 45ϒ POS 2 45ϒ POS 3 45ϒ 45ϒ POS 4 (0.7) .028 (9.5) .374 (6.7) .264 (0.3) .012 (2.54) .100 2 3 4 1 (10.7) .421 C5 (9.0) .354 (5.08) .200 (11.7) .461 (3.5) .138 (0.6) Typ .024 (2.54) Typ .100 (2.54) Typ .100 SK15AEG30 3 Position 5 Position On 3-position models terminals 1 & 5 are support pins. 02-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com