SK24DG13

Process Sealed Keylocks Series SK Distinctive Characteristics Sealed body construction plus disposable boot protect contacts and allow automated processing. Molded-in terminals seal out flux, solvents, and other contaminants. Short body size for space-saving, behind panel dimensions. Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting. Bifurcated, self-wiping contact mechanism provides unequalled logic-level reliability and smoother, positive detent actuation. Crimped bracket legs ensure secure PCB mounting and prevent dislodging during automated wave soldering. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Actual Size N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Process Sealed Keylocks Series SK General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) See Supplement section to find explanation of operating range Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Torque: Contact Timing: Angle of Throw: 80 milliohms maximum 100 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 30,000 cycles minimum 10,000 cycles minimum .026Nm (.234 lb•in) for momentary action models .020Nm (.182 lb•in) for maintained action models Break-before-make 90° for 2-position & 45° for 3-position Materials & Finishes Boot: Key: Tumbler Barrel: Bushing: Bracket: Base: Movable Contactor: Stationary Contacts: Terminals: Polyvinyl chloride Brass alloy with bright nickel plating; brass alloy with bright nickel plating & ABS resin handle Polyacetal Zinc alloy with nickel plating Steel with tin plating Glass fiber reinforced polyamide Beryllium copper with gold plating Copper with gold plating Brass with tin plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: –25°C through +70°C (–13°F through +158°F) 90 ~ 95% humidity for 240 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. Boot must be on switch during processing. See Cleaning specifications in Supplement section. Standards & Certifications UL Recognition CSA Certification: These SK Series devices have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Process Sealed Keylocks TYPICAL SWITCH ORDERING EXAMPLE Series SK SK POLES 1 2 SPDT SP3T DPDT DP3T 2 4E G CONTACT MATERIAL G Gold Rated 0.4VA @ 28V AC/DC 30 CIRCUITS & KEY-REMOVABLE POSITIONS Code 2A 2B 5B *4D *4E Pos. 1 ON ON ON ON ON Pos. 2 NONE NONE NONE ON ON Pos. 3 ON ON (ON) ON ON Key Removes Positions 1 and 3 Position 1 Position 1 Positions 1, 2, 3 Position 2 13 30 PC TERMINALS Straight with Bracket Right Angle ( ) = Momentary *Can be used as ON-OFF-ON circuit DESCRIPTION FOR TYPICAL ORDERING EXAMPLE SK24EG30 Gold Contacts Rated 0.4VA DP3T ON-ON-ON Circuit Key Removable in Position 2 Supplied with Polyvinyl Chloride Boot Right Angle PC Terminals 2 keys supplied with each switch N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Process Sealed Keylocks P OLES, CIRCUITS & KEY-REMOVABLE POSITIONS Pole & Throw SPDT SPDT SPDT DPDT DPDT DPDT SP3T SP3T DP3T DP3T Key Positions Model SK12A SK12B SK15B SK22A SK22B SK25B SK14D SK14E SK24D SK24E Pos 1 ON ON ON ON ON ON ON ON ON ON Pos 2 NONE NONE NONE NONE NONE NONE ON ON ON ON Pos 3 ON ON (ON) ON ON (ON) ON ON ON ON Connected Terminals (Terminal numbers are not on switch) Series SK • = Key Removable = Not Removable = Maximum Arc POS 1 Pos 1 C1-1 C1-1 C1-1 C2-4 C1-1 C2-4 C1-1 C1-1 C1-1 C2-4 C1-1 C2-4 Pos 2 ____ ____ ____ Pos 3 C1-2 C1-2 C1-2 C2-5 C1-2 C2-5 C1-3 C1-3 C1-3 C2-6 C1-3 C2-6 1 1 Schematic C1 3 POS 1 1 2 POS 1 C1 C2 3 POS 1 2 45 3 C1 POS 1 2 3 3 ____ C1-2 C1-2 C1-2 C2-5 C1-2 C2-5 2 1 23 POS 1 3 C1 C2 POS 1 2 3 2 23 456 POS 1 3 KEY REMOVABLE A Positions 1 & 3 90° Angular Throw B Position 1 90° Angular Throw D Positions 1, 2 & 3 45° Angular Throw E Position 2 45° Angular Throw CONTACT MATERIAL & RATING G Gold over Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum TERMINALS 13 Straight PC Terminals with Bracket Double Throw Model Three Throw Model 30 Right Angle PC Terminals Double Throw Model Three Throw Model N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Process Sealed Keylocks KEYS AT4080 Standard Antistatic Plastic Handle Brass Alloy with Bright Nickel Plating & ABS Resin Handle 2 keys supplied with each switch (5.0) .197 (20.0) .787 Series SK (1.5) .059 (14.5) .571 (10.1) .398 PCB Suitable for all Straight PCB mount and for Right Angle PCB mount where clearance for key is obtainable. AT4079 for Right Angle Mid-board Mounting (Optional) All Metal Brass Alloy with Bright Nickel Plating Contact factory if metal keys needed (16.0) .630 (14.0) .551 (1.5) .059 (8.8) .346 (2.0) .079 PCB TYPICAL SWITCH DIMENSIONS Straight PC with Bracket • Double Throw Single & Double Pole POS 1 90ϒ (12.0) Dia .472 (1.0) .039 POS 3 (20.0) .787 (0.5) Typ .020 (2.54) .100 1 2 (0.7) Dia Typ .028 4 5 (5.08) Typ .200 (2.54) Typ .100 (10.5) .413 (3.5) .138 (15.74) .620 C1 C2 (3.0) .118 (14.5) .571 (14.8) .583 (0.3) .012 (10.5) .413 (0.7) Typ .028 (10.16) .400 SK12AG13 Single Pole models have only terminals 1, 2 & C1 Straight PC with Bracket • Three Throw Single & Double Pole POS 2 45ϒ POS 1 (12.0) Dia .472 45ϒ POS 3 (1.0) .039 (20.0) .787 (0.5) Typ .020 (2.54) .100 1 2 (0.7) Dia Typ .028 4 5 6 C2 (5.08) Typ .200 (2.54) Typ .100 (10.5) .413 (3.5) .138 3 C1 (15.74) .620 (14.5) .571 (3.0) .118 (14.8) .583 (0.3) .012 (10.5) .413 (0.7) Typ .028 (10.16) .400 SK24DG13 Single Pole models have only terminals 1, 2, 3 & C1 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Process Sealed Keylocks TYPICAL SWITCH DIMENSIONS Key in Position 1 (5.0) .197 Series SK Right Angle PC Terminals Double Throw Single Pole (16.3) .642 (9.0) .354 (10.5) .413 (0.7) Typ .028 (14.8) .583 (12.4) .488 (7.62) .300 1 2 C1 (12.0) Dia .472 POS 1 (0.7) Dia .028 (2.54) .100 (2.54) Typ .100 (2.54) .100 4 5 C2 (5.08) .200 (3.5) .138 90ϒ (0.5) Typ .020 POS 3 (15.24) .600 (1.0) .039 (20.0) .787 (9.0) .354 1 2 C1 (16.3) .642 (3.0) .118 (2.54) Typ .100 (2.54) .100 (3.5) (0.7) Dia Typ .138 .028 (5.08) .200 Key in Position 3 Key in Position 2 Double Pole Single Pole (16.3) .642 (9.0) .354 SK15BG30 (5.0) .197 Right Angle PC Terminals Three Throw POS 1 45ϒ (12.0) Dia .472 POS 2 45ϒ POS 3 (0.5) Typ .020 (15.24) .600 (3.0) .118 1 2 3 C1 (14.8) .583 (10.5) .413 (0.7) Typ .028 (12.4) .488 1 2 3 C1 (7.62) .300 (0.7) Dia .028 (2.54) .100 (2.54) Typ .100 (2.54) .100 4 5 6 C2 (5.08) .200 (3.5) .138 (9.0) .354 (16.3) .642 (2.54) Typ .100 (2.54) .100 (3.5) (0.7) Dia Typ .138 .028 (5.08) .200 Key in Position 1 Double Pole SK24EG30 Straight PC Footprints (2.54) Typ .100 1 4 1 2 (2.54) Typ .100 1 (2.54) Typ .100 4 1 2 3 C1 (2.54) Typ .100 SPDT 2 DPDT (5.08) .200 (0.8) Dia Typ .031 5 SP3T (5.08) .200 (0.8) Dia Typ .031 (10.16) .400 2 3 C1 DP3T (5.08) .200 (0.8) Dia Typ .031 5 6 C2 C1 C2 C1 (5.08) .200 (0.8) Dia Typ .031 (10.16) .400 (10.16) .400 (10.16) .400 Right Angle PC Footprints (5.08) .200 (2.54) .100 C1 2 1 SPDT (2.54) Typ .100 (2.54) .100 (7.62) .300 (5.08) .200 (2.54) .100 C2 C1 5 2 4 1 (2.54) Typ .100 (2.54) .100 (7.62) .300 C L (0.8) Dia Typ .031 DPDT SP3T (5.08) .200 (2.54) .100 C1 3 2 1 (2.54) Typ .100 (2.54) .100 (7.62) .300 (5.08) .200 (2.54) .100 C2 C1 6 3 5 2 4 1 (2.54) Typ .100 (2.54) .100 (7.62) .300 C L (0.8) Dia Typ .031 DP3T C L (0.8) Dia Typ .031 C L (0.8) Dia Typ .031 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08