UB204KW035D-2B

Complement to UB2 Pushbuttons UB2 Indicators 4J 01 TYPICAL INDICATOR ORDERING EXAMPLE UB2 01 K W03 6CF LEDS CAP TYPES & COLORS Sculptured Cap Lens/Diffuser Colors 1JB 1JC 1JD 1JF 2B Clear/White Clear/Red Clear/Amber Clear/Green Beveled Cap & Colors White Red Amber Green Clear/White Clear/Red Clear/Amber Clear/Green 2C 2D 2F 3JB 3JC MOUNTING T YPES PCB Mounting 01 04 Square Square Snap-in Mounting Bright LED 5C 5D 5F Red Amber Green HOUSING K Black Flat Cap Lens/Diffuser Colors TERMINALS W03 Silver PC/Turret 3JD 3JF Super Bright LED 6B 6F 6G White Green Blue Sculptured Cap Lens/Diffuser Color 1JB 2B 3JB Clear/White Beveled Cap & Color White Clear/White Flat Cap Lens/Diffuser Color Super Bright Bicolor LED 6CF Red/Green Sculptured Cap Lens/Diffuser Color 1JB 2B 3JB Clear/White Beveled Cap & Color White Clear/White Sculptured Cap with Alternating Legend DESCRIPTION FOR TYPICAL ORDERING EXAMPLE UB201KW036CF-4J01 Flat Cap Lens/Diffuser Color Sculptured Cap with ONOFF Dual Legend Filter Red/Green Super Bright Bicolor LED Square with PCB Mounting Black Housing Silver PC/Turret Terminals 4J Clear Lens Flat Cap with Alternating Legend ALTERNATING L EGENDS 01 02 04 ON/OFF START/STOP OPEN/CLOSE 03-07 5J Clear Lens N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Complement to UB2 Pushbuttons UB2 Indicators Terminals MOUNTING TYPES, SHAPES, & TERMINALS PCB Mounting Snap-in Mounting 01 Square 04 Square with Built-in Bezel W03 Silver PC/Turret (0.2) .008 (4.0) .157 (1.0) .039 Thk = (0.5) .020 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm) LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. Polarity marks are on the bottom of the device. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. The LED is an integral part of the indicator and not available separately. Note for Super Bright: Bright Super Bright Super Bright Electrostatic Sensitive Devices Attention 5C Color IFM IF VF VRM ∆IF Red 30 20 1.85 5 0.40 5D Amber 30 20 2.0 5 0.42 –25° ~ +50 5F Green 25 20 2.1 5 0.46 6B White 25 20 3.6 5 0.40 6F Green 25 20 3.5 5 0.40 –20° ~ +50 6G Blue 25 20 3.6 5 0.40 6CF Red/Green 30/25 Amber 25/22 20/20 2.1/3.5 4/4 0.40/0.33 –25° ~ +50 Unit mA mA V V mA/°C °C Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25°C Ambient Temperature Range Bright Single Color LED with 1 element (+) (-) Super Bright Single Color LED with 1 element (+) (-) Super Bright Bicolor LED with 2 elements LC (+) L1 (-) Red L2 (-) Green Amber color can be achieved by lighting red and green simultaneously on the bicolor LED (not suitable for Alternating Legends). N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to UB2 Pushbuttons UB2 Indicators 3 AT3076 Flat Lens/Diffuser Colors Available: (5.6) .220 CAP TYPES & COLOR COMBINATIONS 1 AT3074 Scupltured Lens/Diffuser Colors Available: (6.1) .240 2 AT3075 Beveled Cap Colors Available: (5.6) .220 JB JC JD JF Clear/ White Clear/ Red Clear/ Amber Clear/ Green B C D White Red Amber Green JB JC JD JF Clear/ White Clear/ Red Clear/ Amber Clear/ Green (15.0) Sq .591 (15.0) Sq .591 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy Material: Polycarbonate Finish: Glossy F Material: Polycarbonate Finish: Glossy Alternating Legend Caps for Super Bright Bicolor LED 4J AT3069J Sculptured Cap with Alternating Legend (6.1) .240 5J AT3070J Flat Cap with Alternating Legend (5.6) .220 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF N N N N N N N N N N N N N N N N N N N N N N N N N O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O OFFFFFFFFFFFFFFFFFFFFFFFFFF Clear Lens Alternating Legend Filter EEEEEEEEEEEEEEEEE OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOEEEEEEEEEEEEEEESSSSSSSSSSSSSSSSSSSSNNNNNNNNNNNNNNN OOOOOOOOOOCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCLLLLLLLLLLLLLLLLLLLLLLLLLLLLLPPPPPPPPPPPPP Clear Lens Alternating Legend Filter Finish: Glossy (15.0) Sq .591 (15.0) Sq .591 Material: Polycarbonate Standard Alternating Legend Pairs 01 ON Green OFF Red 02 START Green STOP Red 04 OPEN Green CLOSE Red Cap illumination is alternating green/red; legend text is black. Contact factory for other Alternating Legends. Legend illustrations are approximate representations of the actual characters on the filters. TYPICAL INDICATOR DIMENSIONS PCB Mount L+ N.C. L+ (15.0) Sq .591 (2.54) Typ .100 (0.5) Typ .020 (15.24) Sq .600 (8.5) .335 (0.5) .020 (10.0) .394 (4.0) .157 N.O. COM L– (5.08) .200 L- (5.08) .200 (1.2) Dia Typ .047 (1.0) .039 UB201KW035C-1JC Snap-in Mount L+ (15.0) Sq .591 N.C. (2.54) Typ .100 (0.5) Typ .020 (1.4) .055 (15.5) .610 N.O. COM L– (5.08) .200 (17.4) Sq .685 UB204KW035C-1JC (19.0) Sq .748 (3.0) .118 (4.0) .157 (1.0) .039 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm) 03-07 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com