CF5002LD

SM5002L series NIPPON PRECISION CIRCUITS INC. Crystal Oscillator Module ICs OVERVIEW The SM5002L series crystal oscillator module ICs fabricated in NPC’s Molybdenum-gate CMOS. They comprise low-voltage low-current consumption oscillator circuits and output buffers. They incorporate built-in oscillation capacitance with superior frequency response to realize stable 3rd overtone oscillation without any external components. FEATURES s s s s s s s Oscillation frequency up to 100 MHz Third harmonic Capacitors CG and CD built-in Standby function (oscillator stops) 3 µA (typ) low standby current Inverter amplifier feedback resistance built-in INH pin pull-up resistance built-in • INH= L : 2MΩ typ • INH= H : 90kΩ typ s s s s s s s s CMOS input level 8 mA (VDD = 3.0 V) output drive capability CMOS output duty level Output three-state function 2.7 to 3.6 V supply voltage Oscillator frequency output 8-pin SOP (SM5002L×S) Chip form (CF5002L×) SERIES CONFIGURATION Recommended operating frequency range (MHz) 30 to 40 40 to 50 50 to 70 70 to 90 85 to 100 25 to 30 gm (relative value) 1.0 1.5 1.5 2.0 2.0 1.0 Built-in capacitance CG (pF) 8 8 8 8 8 10 CD (pF) 15 15 10 10 10 15 Rf 1 (kΩ) Cf (pF) Output duty level Output current (mA) 8 8 8 8 8 8 Standby function Version CF5002LA SM5002LAS CF5002LB SM5002LBS CF5002LC SM5002LCS CF5002LD SM5002LDS CF5002LE SM5002LES CF5002LF SM5002LFS 5.6 4.7 3.9 3.9 2.7 8.5 22 22 22 22 22 22 CMOS CMOS CMOS CMOS CMOS CMOS Yes Yes Yes Yes Yes Yes ORDERING INFORMATION Device SM5002L×S CF5002L× Package 8-pin SOP Chip form NIPPON PRECISION CIRCUITS—1 SM5002L series PACKAGE DIMENSIONS (UNIT : mm) • 8-pin SOP + 0.15 − 0.1 0.05 4.4 0.2 6.2 0.3 0.695TYP 0.1 5.2 0.3 1.5 0.05 0.05 0 to 10 1.27 0.10 0.4 0.1 0.12 M NIPPON PRECISION CIRCUITS—2 0.4 0.2 SM5002L series PAD LAYOUT (Unit : µm) VDD Q (920,1310) PINOUT (Top View) Y INH XT XT 1 8 VDD NC NC Q (0,0) INH XT XT VSS X Chip size: 0.92 × 1.31 mm Chip thickness: 400 ± 30 µm Chip base: VDD level PIN DESCRIPTION and PAD DIMENSIONS Number 1 2 3 4 5 6 7 8 Name INH XT XT VSS Q NC NC VDD I/O I I O – O – – – Description Output state control input. Oscillator stopped when LOW. Power-saving pull-up resistor built in Amplifier input. Amplifier output. Ground Output. Output frequency. High impedance at standby operation No connection No connection Supply voltage Crystal oscillator connection pins. Crystal oscillator connected between XT and XT Pad dimensions [µm] X 195 385 575 766 765 – – 162 Y 188 188 188 188 1159 – – 1159 BLOCK DIAGRAM VDD VSS XT CG Rf 1 Cf CD INH HA5002L 5002L 2 3 4 7 6 5 VSS XT Rf 2 Q RUP1/RUP2 NIPPON PRECISION CIRCUITS—3 SM5002L series SPECIFICATIONS Absolute Maximum Ratings VSS = 0 V unless otherwise noted. Parameter Supply voltage range Input voltage range Output voltage range Operating temperature range Storage temperature range Output current Power dissipation Soldering temperature Soldering time Symbol VDD VIN VOUT Topr Tstg1 Tstg2 IOUT PD Tsld tsld Ta ≤ 85°C, 8-pin SOP 8-pin SOP 8-pin SOP Chip form 8-pin SOP Condition Rating −0.5 to 7.0 −0.5 to VDD + 0.5 −0.5 to VDD + 0.5 −40 to 85 −65 to 150 −40 to 125 25 200 255 10 Unit V V V °C °C mA mW °C s Recommended Operating Conditions CF5002L× series (Chip form) VSS = 0 V unless otherwise noted. Limits Parameter Symbol Conditions min CL ≤ 15pF, f ≤ 70 MHz Supply voltage VDD CL ≤ 15pF, 70 < f ≤ 100 MHz CL ≤ 30pF, f ≤ 70 MHz Input voltage Operating temperature VIN TOPR 2.7 3.0 3.0 VSS −20 typ – – – – – max 3.6 3.6 3.6 VDD 80 V V V V °C Units SM5002L×S series (8-pin SOP) VSS = 0 V unless otherwise noted. Limits Parameter Symbol Conditions min CL ≤ 15pF, f ≤ 50 MHz Supply voltage VDD CL ≤ 15pF, 50 < f ≤ 70 MHz CL ≤ 30pF, f ≤ 50 MHz Input voltage Operating temperature VIN TOPR 2.7 3.0 3.0 VSS −20 typ – – – – – max 3.6 3.6 3.6 VDD 80 V V V V °C Units NIPPON PRECISION CIRCUITS—4 SM5002L series Electrical Characteristics VDD = 2.7 to 3.6 V, VSS = 0 V, Ta = −20 to 80 °C, unless otherwise noted. Limits Parameter HIGH-level output voltage LOW-level output voltage Output leakage current HIGH-level input voltage LOW-level input voltage Symbol VOH VOL IZ VIH VIL Conditions min Q: Measurement cct 1, VDD = 2.7 V, IOH = 8 mA Q: Measurement cct 2, VDD = 2.7 V, IOL = 8 mA Q: Measurement cct 2, INH = LOW, VDD = 3.6V INH pin INH pin SM5002LAS, SM5002LFS CF5002LA, CF5002LF CL = 30 pF, f = 30 MHz INH = open, Measurement cct 3, load cct 1, VDD = 3.0 to 3.6 V SM5002LBS, CF5002LB CL = 30 pF, f = 50 MHz SM5002LCS, CF5002LC CL = 30 pF, f = 70 MHz SM5002LDS, SM5002LES CF5002LD, CF5002LE CL = 15 pF, f = 100 MHz Standby current INH pull-up resistance IST RUP1 RUP2 INH = LOW, Measurement cct 3 Measurement cct 4, INH = LOW Measurement cct 4, INH = 0.7VDD SM5002LAS, CF5002LA SM5002LBS, CF5002LB AC feedback resistance Rf1 Design value, determined by the internal wafer pattern SM5002LCS, SM5002LDS CF5002LC, CF5002LD SM5002LES, CF5002LE SM5002LFS, CF5002LF DC feedback resistance AC feedback capacitance Rf2 Cf Measurement cct 5 Design value, determined by the internal wafer pattern SM5002LAS, CF5002LA SM5002LBS, CF5002LB SM5002LCS, CF5002LC SM5002LDS, CF5002LD SM5002LES, CF5002LE Design value, determined by the internal wafer pattern CD SM5002LFS, CF5002LF SM5002LAS, CF5002LA SM5002LBS, CF5002LB SM5002LFS, CF5002LF SM5002LCS, CF5002LC SM5002LDS, CF5002LD SM5002LES, CF5002LE VOH = VDD VOL = VSS 2.2 – – – 0.7VDD – – typ 2.4 0.3 – – – – 10 max – 0.4 10 10 – 0.3VDD 18 V V µA µA V V mA Units – – 15 20 25 35 mA mA Current consumption IDD – – 0.4 50 4.7 4.0 3.3 2.2 7.2 50 19.8 25 3 – – 5.6 4.7 3.9 2.7 8.5 – 22 45 10 4 150 6.5 5.4 4.5 3.2 9.8 150 24.2 mA µA MΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ pF 7.2 8 8.8 pF CG 9 13.5 10 15 11 16.5 pF pF Built-in capacitance 9 10 11 pF NIPPON PRECISION CIRCUITS—5 SM5002L series Switching Characteristics VSS = 0 V, Ta = −20 to 80 °C unless otherwise noted. Limits Parameter Symbol Conditions min tr1 Output rise time tr2 tf1 Output fall time tf2 Measurement cct 3, load cct 1, 0.1VDD → 0.9VDD VDD = 2.7 to 3.6 V, CL = 15 pF VDD = 3.0 to 3.6 V, CL = 30 pF VDD = 2.7 to 3.6 V, CL = 15 pF VDD = 3.0 to 3.6 V, CL = 30 pF SM5002LAS, SM5002LFS CF5002LA, CF5002LF CL = 30 pF, f = 30 MHz Measurement cct 3, load cct 1, Ta = 25 °C, VDD = 3.0 V SM5002LBS, CF5002LB CL = 30 pF, f = 50 MHz SM5002LCS, CF5002LC CL = 30 pF, f = 70 MHz SM5002LDS, SM5002LES CL = 15 pF, f = 100 MHz CF5002LD, CF5002LE CL = 15 pF, f = 100 MHz Output disable delay time2 Output enable delay time2 tPLZ tPZL Measurement cct 6, Ta = 25 °C, VDD = 2.7 V, load CL ≤ 15 pF – – – – typ 2 2.5 2 2.5 max 4 5 4 5 ns ns ns ns Units Measurement cct 3, load cct 1, 0.9VDD → 0.1VDD 45 – 55 % 45 45 40 45 – – – – – – – – 55 55 60 55 100 100 % % % % ns ns Output duty cycle1 DUTY 1. Monitored in sample lots. 2. Oscillator stop function is built-in. When INH goes LOW, normal output stops. When INH goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed. Current consumption and Output waveform with NPC’s standard crystal Cb f (MHz) 30 50 70 100 R (Ω) 18.62 22.17 25.42 16.60 L (mH) 16.24 7.40 4.18 3.56 Ca (fF) 1.733 1.370 1.254 0.726 Cb (pF) 5.337 4.105 5.170 5.394 L Ca R FUNCTIONAL DESCRIPTION Standby Function The oscillator stops when INH goes LOW. When the oscillator stops, the oscillator output on Q goes high impedance. INH HIGH (or open) LOW Q fO output frequency High impedance Oscillator Normal operation Stopped NIPPON PRECISION CIRCUITS—6 SM5002L series MEASUREMENT CIRCUITS Measurement cct 1 Measurement cct 4 Signal Generator R1 C1 XT VDD VDD Q VSS R2 RUP1= VSS INH VDD IPR (VPR = VSS) V Q output VOH 0V RUP2= VDD 0.7VDD (VPR = 0.7V DD) IPR VPR A IPR 2.5VP−P , 10MHz sine wave input signal C1 : 0.001µF R1 : 50Ω R2 : 275Ω Measurement cct 2 Measurement cct 5 IOL, IZ VDD Q INH VSS IZ XT XT VDD Rf 2 = VSS VDD IRf A V VOL A IRf Measurement cct 3 Measurement cct 6 A XT X'tal XT INH VSS VDD IDD IST VDD Signal Generator R1 XT VSS Q INH Q R1 : 50Ω NIPPON PRECISION CIRCUITS—7 SM5002L series Load cct 1 Q output CL (Including probe capacity) CL = 15pF: tr1, tf1 /DUTY, IDD (70MHz < f ≤ 100MHz) CL = 30pF: tr2 , tf2 /DUTY, IDD (f ≤ 70MHz) Switching Time Measurement Waveform Output duty level (CMOS) Q output 0.9VDD 0.1VDD TW 0.9VDD 0.1VDD DUTY measuring voltage (0.5V DD) tr Output duty cycle (CMOS) tf Q output TW T DUTY measuring voltage (0.5V DD) DUTY= TW/ T 100 (%) Output Enable/Disable Delay The following figure shows the oscillator timing during normal operation. Note that when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay. INH VIL VIH tPLZ Q output INH inputwaveform tr = tf tPZL 10ns NIPPON PRECISION CIRCUITS—8 SM5002L series NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. The products described in this data sheet are not intended to use for the apparatus which influence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinafter, including compliance with export controls on the distribution or dissemination of the products. Customers shall not export, directly or indirectly, any products without first obtaining required licenses and approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome Koto-ku, Tokyo 135-8430, Japan Telephone: 03-3642-6661 Facsimile: 03-3642-6698 NC9505DE 1999.10 NIPPON PRECISION CIRCUITS INC. NIPPON PRECISION CIRCUITS—9