SM5004

SM5004 Series NIPPON PRECISION CIRCUITS INC. Quartz Crystal Oscillator IC OVERVIEW The SM5004 Series crystal oscillator module ICs fabricated in NPC’s Molybdenum-gate CMOS. They comprise low-voltage low-current consumption oscillator circuits and output buffers. They incorporate built-in oscillation capacitance with superior frequency response to realize without any external components. FEATURES ⋅ Oscillation frequency up to 30MHz ⋅ Fundamentally oscillation ⋅ 4.5 to 5.5 V supply voltage ⋅ Inverter amplifier feedback resistance built-in (Rf ) ⋅ Oscillation capacitances built-in (CG and CD) ⋅ Output drive capability : 8 mA (VDD=4.5V) ⋅ Output frequency : fo, fo/2, fo/4, fo/8 ⋅ Output duty level CMOS, TTL, CMOS & TTL ⋅ Input level : TTL ⋅ 3 state function ⋅ Chip form (CF5004××) ⋅ 6 pin SOT (SM5004××H) DEVICE LIST Device SM5004A1H SM5004A3H SM5004A5H SM5004A7H SM5004B1H SM5004B3H Notes: CF5004×× is Chip form. SM5004××H is 6 pin SOT. Output duty level CMOS CMOS CMOS, TTL CMOS, TTL TTL TTL Output frequency f0 f0/2 f0/4 f0/8 f0 f0/2 Output (standby) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) Hi-Z (Stop oscillation) NIPPON PRECISION CIRCUITS-1 SM5004 Series PAD DIMENSIONS Q XT (1000,800) PAD COORDINATES Name VSS VDD XT INH VDD XT Q Coordinates (µm) X 150 570 850 850 850 150 Y 150 170 150 450 650 650 Y (0,0) VSS X XT INH Chip size : 1.00×0.80 mm Chip thickness : 250 ± 30 µm Chip reverse side : VDD level PIN CONFIGURATION (Top view) INH XT VSS 1 2 3 6 5 4 XT VDD Q TERMINAL DESCRIPTIONS Name XT XT INH VDD VSS Q Oscillator input pin Oscillator output pin Output state control input pin (with buit-in pull-up resistance) Supply voltage Ground Output pin Descriptions NIPPON PRECISION CIRCUITS-2 SM5004 Series PACKAGE DIMENSIONS (6 pin SOT) 1.60 −0.1 +2.0 2.9±0.2 0.40±0.1 1.1±0.1 +0.1 0.15 −0.05 0.95 1.9±0.2 0 to 0.15 2.8 +2.0 −0.3 (Unit:mm) BLOCK DIAGRAM XT CG Rf CD 1/2 1/2 1/2 XT Q VDD VSS INH NIPPON PRECISION CIRCUITS-3 SM5004 Series SPECIFICATIONS Absolute Maximum Ratings (VSS = 0V unless otherwise noted) Rating Unit -0.5 to 7.0 -0.5 to VDD + 0.5 -0.5 to VDD + 0.5 Chip form 6 pin SOT Power dissipation Output current Soldering temperture Soldering time PW IOUT TSLD tSLD 6 pin SOT 6 pin SOT 6 pin SOT -65 to 150 -55 to 125 250 13 255 10 V V V °C °C mW mA °C sec Parameter Supply voltage range Input voltage range Output voltage range Strage temperature ranges Symbol VDD VIN VOUT TSTG Condition Recommended Operating Conditions (VSS= 0V unless otherwise noted) Limit Parameter Supply Voltage Input voltage Operating temperature Symbol VDD VIN TOPR Condition MIN 4.5 VSS -20 TYP MAX 5.5 VDD +80 Unit V V °C Electrical Characteristics (VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80°C, unless otherwise noted ) Limit Parameter HIGH-level output voltage LOW-level output voltage Output leakage current Symbol Condition Q pin, test circuit 1, VDD= 4.5V, IOH= 8mA Q pin, test circuit 2, VDD= 4.5V, IOL= 8mA Q pin, test circuit 2, INH= Low, VDD= 5.5V INH pin INH pin INH= OPEN, test circuit 3, CL= 15pF, f= 30MHz SM5004A×H load circuit 1 SM5004B×H load circuit 2 VOH= VDD VOL= VSS MIN 3.9 TYP 4.2 0.3 MAX 0.4 10 10 Unit V V µA µA V V mA mA kΩ kΩ pF pF VOH VOL IZ VIH VIL IDD HIGH-level input voltage LOW-level input voltage Current consumption 2.0 0.8 9 9 25 100 17 17 100 200 20 20 14 14 250 400 23 23 Pull-up resistance AC feedback resistance RUP Rf CG CD INH pin, test circuit 4 test circuit 5 Design value, determined by the internal wafer pattern. Internal capacitance NIPPON PRECISION CIRCUITS-4 SM5004 Series Switching Characteristics Duty level CMOS Parameter Output rise time Output fall time Output duty cycle Output disable delay time Output enable delay time Duty level TTL Symbol tr tf DUTY tPLZ tPZL (VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80°C, unless otherwise noted) Limit Condition Test circuit 6, load circuit 1, CL= 15pF 0.1VDD to 0.9VDD Test circuit 6, load circuit 1, CL= 15pF 0.9VDD to 0.1VDD Test circuit 6, Ta= 25˚C, VDD=5.0V load circuit 1, CL= 15pF, f= 30MHz (*1) Test circuit 6, Ta= 25˚C, VDD= 5.0V load circuit 1, CL= 15pF 100 100 ns ns 45 55 % 3.5 7 ns MIN TYP 3.5 MAX 7 Unit ns (VDD= 4.5 to 5.5V, VSS = 0V, Ta= -20 to 80 C, unless otherwise noted) Limit Parameter Output rise time Output fall time Output duty cycle Output disable delay time Output enable delay time Note: Symbol tr tf DUTY tPLZ tPZL Condition Test circuit 6, load circuit 2, CL= 15pF 0.4VDD to 2.4VDD Test circuit 6, load circuit 2, CL= 15pF 2.4VDD to 0.4VDD Test circuit 6, Ta= 25˚C, VDD=5.0V load circuit 2, CL= 15pF, f= 30MHz (*1) Test circuit 6, Ta= 25˚C, VDD= 5.0V load circuit 2, CL= 15pF MIN TYP 2.5 2.5 MAX 7 7 55 100 100 Unit ns ns % ns ns 45 (*1) Determined by the lot monitor. NIPPON PRECISION CIRCUITS-5 SM5004 Series TEST CIRCUITS Test Circuit 1 3.5 VP-P, 10MHz sine wave input signal Test Circuit 2 VDD VDD Q Q R2 INH VSS IOL, IZ IZ Signal Generator R1 C1: 0.001µF R1: 50 Ω R2: 490 Ω C1 XT VSS A V VOL VOH Q output VOH 0V Test Circuit 3 3.5 VP-P, 30MHz sine wave input signal Test Circuit 4 VDD A VDD C1 XT R1 C1: 0.001µF R1: 50Ω VSS IDD RUP= VSS Q INH VDD IPR Signal Generator A IPR Test Circuit 5 Test Circuit 6 XT XT VDD Rf= VSS VDD IRf XT VDD R1 10kΩ Q R2 10kΩ CL VSS INH A IRf Notes R1 : SM5004 3H R2 : SM5004 1H SM5004 5H SM5004 7H CL : 15pF(Including proove capacity) Load Circuit 1 Load Circuit 2 VDD R Q output CL CL=15pF(Including proove capacity) Q output CL CL=15pF(Including proove capacity) R=800Ω NIPPON PRECISION CIRCUITS-6 SM5004 Series Switching Time Test Waveforms Duty level CMOS tr,tf DUTY 0.9VDD 0.1VDD 0.9VDD 0.1VDD DUTY measuring voltage (0.5VDD) Q output tr Output duty cycle time tf Q output TW T DUTY measuring voltage (0.5V DD) DUTY= (TW/ T) 100 (%) Duty level TTL tr,tf DUTY 2.4V 0.4V Q output 2.4V 0.4V DUTY measuring voltage (1.4V ) tr Output duty cycle time tf Q output TW T DUTY measuring voltage (1.4V) DUTY= (TW/ T) 100 (%) Output Disable/Enable Delay Times INH VIH VIL tPLZ Q output tPZL INH inputwaveform tr = tf 10ns Note : This waveform is provided by oscillating. NIPPON PRECISION CIRCUITS-7 SM5004 Series NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. The products described in this data sheet are not intended to use for the apparatus which influence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinafter, including compliance with export controls on the distribution or dissemination of the products. Customers shall not export, directly or indirectly, any products without first obtaining required licenses and approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. 4-3, 2-chome Fukuzumi, Koto-ku Tokyo, 135 -8430, JAPAN Telephon: 03-3642-6661 Facsimile: 03-3642-6698 NC9512BE 1996 10 NIPPON PRECISION CIRCUITS INC. NIPPON PRECISION CIRCUITS-8