SM5009CN2S

SM5009 series Crystal Oscillator Module ICs OVERVIEW The SM5009 series are crystal oscillator module ICs that incorporate low crystal current type oscillating circuit to limit oscillator-stage current, so that they can reduce crystal current lower than the existing products. Since the oscillating circuit has oscillator capacitors with excellent frequency response and feedback resistor built-in, just connecting crystal realizes stable fundamental oscillation responding up to 40MHz. The SM5009 series are ideal for SMD type crystal oscillator using a strip-shaped crystal blank. FEATURES I I I I I I I I Low crystal current oscillator Up to 40MHz operating frequency range (fundamental oscillation) Operating supply voltage range • 3V operation: 2.7 to 3.6V • 5V operation: 4.5 to 5.5V –40 to 85°C operating temperature range Oscillation capacitors CG, CD built-in Inverter amplifier feedback resistor built-in Standby function • Oscillator stops (AL series), high impedance in standby mode Low standby current I I I I I I I • Power-save pull-up resistor built-in (AL series) Frequency divider built-in (fO, fO/2, fO/4, fO/8, fO/16, fO/32 determined by internal connection) Output drive capability • AL×, AN×, AK×, CN×: 16mA (VDD = 4.5V) • AH×: 4mA (VDD = 4.5V) Output load: CL = 50pF max. Output duty level • CMOS level (1/2 VDD): AL×, AN×, AH×, CN× • TTL level (1.4V): AK× Molybdenum-gate CMOS process 8-pin SOP (SM5009×××S) Chip form (CF5009×××) Standby mode Output frequency fO fO/2 fO/4 fO/8 fO/16 fO/32 fO fO/2 fO/4 fO/8 fO/16 fO/32 fO fO/2 fO fO/2 fO fO/2 fO/4 fO/8 INH Input level Oscillator stop function Output state SERIES CONFIGURATION Version1 3V operation 5V operation Recommended Recommended Output Output Output operating operating load3 (max) load3 (max) duty level frequency frequency [pF] [pF] range2 [MHz] range2 [MHz] CF5009AL1 CF5009AL2 CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 CF5009AN1 CF5009AN2 CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 CF5009CN1 CF5009CN2 CF5009AK1 CF5009AK2 CF5009AH1 CF5009AH2 CF5009AH3 CF5009AH4 Up to 40 50 Up to 40 50 CMOS CMOS Yes Hi-Z CMOS Up to 40 30 Up to 40 50 CMOS/TTL TTL No Hi-Z Up to 30 – 15 – Up to 30 Up to 40 50 15 CMOS TTL TTL TTL No No Hi-Z Hi-Z Up to 16 15 Up to 30 15 CMOS TTL No Hi-Z 1. Package devices (8-pin SOP) have designation SM5009×××S. 2. The recommended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the oscillation characteristics of components must be carefully evaluated. 3. Output load value is the maximum load capacitance that allows drive. APPLICATIONS I ORDERING INFORMATION Device SM5009×××S CF5009×××–1 Package 8-pin SOP Chip form SMD type crystal oscillator module NIPPON PRECISION CIRCUITS INC.—1 SM5009 series PAD LAYOUT (Unit: µm) PINOUT (Top view) VDD Q (920,1220) Y INH XT XT 1 2 3 4 8 7 6 5 VDD NC NC Q (0,0) INH XT XT VSS X Chip size: 0.92 × 1.22 mm Chip thickness: 300 ± 30 µm Chip base: VDD level PIN DESCRIPTION and PAD DIMENSIONS Number Name I/O Description Output state control input. Standby mode when LOW, pull-up resistor built-in. In the case of the CF5009AL×, the oscillator stops and power-save pull-up resistor built in to reduce current consumption at standby mode. Amplifier input. Amplifier output. Ground Output. Output frequency (fO, fO/2, fO/4, fO/8, fO/16, fO/32) determined by internal connection No connection No connection Supply voltage Crystal oscillator connection pins. Crystal oscillator connected between XT and XT Pad dimensions [µm] X 195 385 575 766 765 – – 162 Y 212 212 212 212 1062 – – 1062 1 2 3 4 5 6 7 8 INH XT XT VSS Q NC NC VDD HA5009 I I O – O – – – VSS NIPPON PRECISION CIRCUITS INC.—2 SM5009 series PACKAGE DIMENSIONS (Unit: mm) • 8-pin SOP 0.15 + 0.1 − 0.05 4.4 0.2 6.2 0.3 0.695typ 5.2 0.3 0.05 0.05 1.5 0.1 1.27 0.10 0.4 0.1 0.12 M 0.4 0.2 0 to 10 BLOCK DIAGRAM VDD VSS XT CGp Rf CDp 1/2 1/2 1/2 1/2 1/2 XT CGn CDn Q INH Notes. The SM5009 series reduce crystal current by limiting driving current of oscillating-stage inverter and inhibiting oscillating amplitude. Depending on the characteristics of using crystal or the mounting condition, they may not oscillate normally. Please evaluate the oscillation start-up characteristics adequately with your actual device. NIPPON PRECISION CIRCUITS INC.—3 SM5009 series FUNCTIONAL DESCRIPTION Standby Function 5009 AL× series When INH goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance. 5009AH×, AK×, AN×, CN× series When INH goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop. Version AL× series AH×, AK×, AN×, CN× series INH HIGH (or open) LOW HIGH (or open) LOW Q Any fO , fO/2, fO/4, fO/8, fO/16 or fO/32 output frequency High impedance Any fO , fO/2, fO/4, fO/8, fO/16 or fO/32 output frequency High impedance Oscillator Normal operation Stopped Normal operation Normal operation Power-save Pull-up Resistance (AL× series only) The INH pull-up resistance changes in response to the input level (HIGH or LOW). When INH goes LOW (standby state), the pull-up resistance becomes large to reduce the current consumption during standby. Current consumption and Output waveform with NPC’s standard crystal Cb f [MHz] 30 40 R [ Ω] 17.2 16.8 L [mH] 4.36 2.90 Ca [fF] 6.46 5.47 Cb [pF] 2.26 2.08 L Ca R NIPPON PRECISION CIRCUITS INC.—4 SM5009 series SPECIFICATIONS Absolute Maximum Ratings VSS = 0V unless otherwise noted. Parameter Supply voltage range Input voltage range Output voltage range Operating temperature range Storage temperature range Output current Power dissipation Symbol VDD VIN VOUT Topr Tstg IOUT PD 8-pin SOP Chip form 8-pin SOP Condition Rating −0.5 to +7.0 −0.5 to VDD + 0.5 −0.5 to VDD + 0.5 −40 to +85 −65 to +150 −55 to +125 25 500 Unit V V V °C °C mA mW Recommended Operating Conditions VSS = 0V unless otherwise noted. Parameter Symbol Version AH× AK× AN× Supply voltage VDD CN× f ≤ 30MHz f ≤ 16MHz f ≤ 40MHz f ≤ 40MHz f ≤ 30MHz f ≤ 40MHz Chip form AL× 8-pin SOP Input voltage VIN All version AH× AK× f ≤ 30MHz, 4.5V ≤ VDD ≤ 5.5V f ≤ 16MHz, 2.7V ≤ VDD ≤ 3.6V f ≤ 30MHz 30MHz < f ≤ 40MHz Chip form AN× 8-pin SOP Operating temperature TOPR CN× f ≤ 40MHz, 2.7V ≤ VDD < 4.5V f ≤ 40MHz, 4.5V ≤ VDD ≤ 5.5V f ≤ 40MHz, 2.7V ≤ VDD < 4.5V f ≤ 40MHz, 4.5V ≤ VDD ≤ 5.5V f ≤ 30MHz, 4.5V ≤ VDD ≤ 5.5V f ≤ 30MHz, 2.7V ≤ VDD < 4.5V f ≤ 30MHz, 4.5V ≤ VDD ≤ 5.5V f ≤ 40MHz, 2.7V ≤ VDD ≤ 5.5V Chip form AL× 8-pin SOP f ≤ 30MHz, 2.3V ≤ VDD ≤ 2.7V f ≤ 20MHz, 2.25V ≤ VDD ≤ 2.75V f ≤ 40MHz, 2.7V ≤ VDD ≤ 5.5V f ≤ 30MHz, 2.7V ≤ VDD ≤ 5.5V f ≤ 14.4MHz, 2.4V ≤ VDD ≤ 2.7V f ≤ 30MHz f ≤ 20MHz f ≤ 40MHz f ≤ 14.4MHz Condition Rating min 4.5 2.7 4.5 2.7 2.7 2.7 2.3 2.25 2.7 2.4 VSS − 40 − 20 − 40 − 20 − 20 − 40 − 20 − 20 − 40 − 10 − 40 − 40 − 20 − 20 − 20 − 40 − 20 typ – – – – – – – – – – – – – – – – – – – – – – – – – – – – max 5.5 3.3 5.5 5.5 5.5 5.5 2.7 2.75 5.5 2.7 VDD + 85 + 80 + 85 + 80 + 80 + 85 + 80 + 80 + 85 + 70 + 85 + 85 + 80 + 80 + 80 + 85 + 80 °C °C °C V °C °C V Unit V V V V NIPPON PRECISION CIRCUITS INC.—5 SM5009 series Electrical Characteristics 5009AL× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 8mA Q: Measurement cct 1, IOL = 8mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AL1 CF5009AL2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption IDD SM5009AL1S SM5009AL2S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = –20 to +80°C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 −RL Rf CG CD INH = VSS, Measurement cct 3 Measurement cct 4, VDD = 3V, INH = VSS Measurement cct 4, VDD = 3V, INH = 2.1V VDD = 3V, Ta = 25°C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF 2.2 – 0.7VDD – – – – – – – – – – – – – – – – 0.6 40 – 0.4 5.58 typ – – – – – – 8 5 4 3 3 2 8 5 4 3 3 2 2 – – –200 – 6 max – 0.4 – 0.3VDD 10 µA 10 17 11 9 7 6 5 mA 17 11 9 7 6 5 5 12 200 – 1.1 6.42 µA MΩ kΩ Ω MΩ pF V V V V Unit NIPPON PRECISION CIRCUITS INC.—6 SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 16mA Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AL1 CF5009AL2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AL3 CF5009AL4 CF5009AL5 CF5009AL6 Current consumption IDD SM5009AL1S SM5009AL2S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = –20 to +80°C SM5009AL3S SM5009AL4S SM5009AL5S SM5009AL6S Standby current INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance IST RUP1 RUP2 −RL Rf CG CD INH = VSS, Measurement cct 3 Measurement cct 4, VDD = 5V, INH = VSS Measurement cct 4, VDD = 5V, INH = 3.5V VDD = 5V, Ta = 25°C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF 4.0 – 0.7VDD – – – – – – – – – – – – – – – – 0.3 40 – 0.4 5.58 typ – – – – – – 12 8 6 5 5 4 12 8 6 5 5 4 6 – – –400 – 6 max – 0.4 – 0.3VDD 10 µA 10 26 17 13 11 10 9 mA 26 17 13 11 10 9 15 6 200 – 1.1 6.42 µA MΩ kΩ Ω MΩ pF V V V V Unit NIPPON PRECISION CIRCUITS INC.—7 SM5009 series 5009AN×/CN× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −20 to 80°C unless otherwise noted. Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, IOH = 8mA SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 2.2 typ – max – Unit V 2.1 – – LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current VOL VIH VIL IZ Q: Measurement cct 1, IOL = 8mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator, Ta = –10 to +70°C SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 – 2.0 – – – – – – – – – – – 40 – 0.4 5.58 – – – – – 8 5 4 3 3 2 7 4 – –100 – 6 10 0.4 – 0.3 10 V V V µA 10 17 11 9 7 6 5 15 9 200 – 1.1 6.42 10.7 kΩ Ω MΩ pF pF mA Current consumption IDD INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP −RL Rf CG CD Measurement cct 4, VDD = 3V, INH = VSS VDD = 3V, Ta = 25°C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 NIPPON PRECISION CIRCUITS INC.—8 SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 HIGH-level output voltage VOH Q: Measurement cct 1, IOH = 16mA SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 4.0 typ – max – Unit V 3.9 – – LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current VOL VIH VIL IZ Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS CF5009AN1 CF5009AN2 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator CF5009AN3 CF5009AN4 CF5009AN5 CF5009AN6 SM5009AN1S – 2.0 – – – – – – – – – – – – – – – – – 40 – 0.4 5.58 – – – – – 12 8 6 5 5 4 12 8 6 5 5 4 10 7 – –210 – 6 10 0.4 – 0.8 10 V V V µA 10 26 17 13 11 10 9 26 17 13 11 10 9 22 15 200 – 1.1 6.42 10.7 kΩ Ω MΩ pF pF mA Current consumption IDD INH = open, Measurement cct 3, load cct 2, CL = 15pF, 40MHz crystal oscillator, Ta = –20 to +80°C SM5009AN2S SM5009AN3S SM5009AN4S SM5009AN5S SM5009AN6S INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP −RL Rf CG CD Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25°C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 NIPPON PRECISION CIRCUITS INC.—9 SM5009 series 5009AK× series VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 16mA Q: Measurement cct 1, IOL = 16mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AK1S Current consumption IDD INH = open, Measurement cct 3, load cct 1, CL = 15pF, 40MHz crystal oscillator, Ta = –20 to +80°C Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25°C, 40MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 9.3 10 10.7 pF CF5009AK1 SM5009AK2S CF5009AK2 INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP −RL Rf CG CD 4.0 – 2.0 – – – – – – – 40 – 0.4 5.58 typ – – – – – – 12 12 8 8 – –210 – 6 max – 0.4 – 0.8 10 µA 10 26 26 mA 17 17 200 – 1.1 6.42 kΩ Ω MΩ pF V V V V Unit NIPPON PRECISION CIRCUITS INC.—10 SM5009 series 5009AH× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −20 to 80°C unless otherwise noted. Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 2mA Q: Measurement cct 1, IOL = 2mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AH1S CF5009AH1 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 16MHz crystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 2.2 – 2.0 – – – – – typ – – – – – – 4.5 3 max – 0.4 – 0.3 10 µA 10 10 7 mA – 1.5 3.5 kΩ Ω MΩ pF pF V V V V Unit Current consumption IDD INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP −RL Rf CG CD Measurement cct 4, VDD = 3V, INH = VSS VDD = 3V, Ta = 25°C, 16MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 40 – 0.4 5.58 9.3 – –450 – 6 10 200 – 1.1 6.42 10.7 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter HIGH-level output voltage LOW-level output voltage HIGH-level input voltage LOW-level input voltage Output leakage current Symbol VOH VOL VIH VIL IZ Condition min Q: Measurement cct 1, IOH = 4mA Q: Measurement cct 1, IOL = 4mA INH INH Q: Measurement cct 2, INH = LOW, VOH = VDD Q: Measurement cct 2, INH = LOW, VOL = VSS SM5009AH1S CF5009AH1 INH = open, Measurement cct 3, load cct 2, CL = 15pF, 30MHz crystal oscillator SM5009AH2S CF5009AH2 SM5009AH3S CF5009AH3 SM5009AH4S CF5009AH4 4.0 – 2.0 – – – – – typ – – – – – – 9 6 max – 0.4 – 0.8 10 µA 10 20 13 mA – 4 9 kΩ Ω MΩ pF pF V V V V Unit Current consumption IDD INH pull-up resistance Negative resistance Feedback resistance Built-in capacitance RUP −RL Rf CG CD Measurement cct 4, VDD = 5V, INH = VSS VDD = 5V, Ta = 25°C, 30MHz Measurement cct 5 Design value. A monitor pattern on a wafer is tested. 40 – 0.4 5.58 9.3 – –340 – 6 10 200 – 1.1 6.42 10.7 NIPPON PRECISION CIRCUITS INC.—11 SM5009 series Switching Characteristics 5009AL× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Symbol Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF tr1 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 2.3 to 2.7V, Ta = –20 to +80°C, CL = 15pF Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 30pF Output rise time tr2 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 2.4 to 2.7V, Ta = –20 to +80°C, CL = 30pF Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , VDD = 3.0 to 3.6V, f ≤ 30MHz, CL = 50pF Measurement cct 3, load cct 2, 0.2VDD to 0.8VDD , VDD = 3.0 to 3.6V, f ≤ 40MHz, CL = 50pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF tf1 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 2.3 to 2.7V, Ta = –20 to +80°C, CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 30pF Output fall time tf2 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 2.4 to 2.7V, Ta = –20 to +80°C, CL = 30pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , VDD = 3.0 to 3.6V, f ≤ 30MHz, CL = 50pF Measurement cct 3, load cct 2, 0.8VDD to 0.2VDD , VDD = 3.0 to 3.6V, f ≤ 40MHz, CL = 50pF Measurement cct 3, load cct 2, VDD = 3V, f ≤ 40MHz, Ta = 25°C, CL = 30pF Duty1 Output duty cycle1 Measurement cct 3, load cct 2, VDD = 2.4V, f ≤ 14.4MHz, Ta = 25°C, CL = 30pF CF5009AL× only, Measurement cct 3, load cct 2, VDD = 2.5V, f ≤ 30MHz, Ta = 25°C, CL = 15pF CF5009AL× only, Measurement cct 3, load cct 2, VDD = 3.3V, f ≤ 30MHz, Ta = 25°C, CL = 50pF CF5009AL× only, Measurement cct 3, load cct 2, VDD = 3.3V, f ≤ 40MHz, Ta = 25°C, CL = 50pF Measurement cct 6, load cct 2, VDD = 3V, Ta = 25°C, CL ≤ 15pF CF5009AL× SM5009AL×S SM5009AL×S VDD = 2.4 to 2.7V, SM5009AL×S Measurement cct 3, Ta = –20 to +80°C VDD = 2.3 to 2.7V, CF5009AL× VDD = 2.25 to 2.75V, CF5009AL× – – – – – – – – – – – – 45 40 40 45 40 – – 40 30 40 14.4 30 20 typ 3.5 4 5 5.5 5 3.5 3.5 4 5 5.5 5 3.5 – – – – – – – – – – – – – max 9 13 12 16 12 12 9 13 12 16 12 12 55 60 60 55 60 100 100 – – – – – – MHz ns ns % ns ns Unit tr3 tf3 Duty2 Output disable delay time2 Output enable delay time2 tPLZ tPZL Measurement cct 3 Measurement cct 3, Ta = –20 to +80°C Maximum operating frequency fmax 1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INH goes LOW, normal output stops. When INH goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed. NIPPON PRECISION CIRCUITS INC.—12 SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle1 Output disable delay time2 Output enable delay time2 Maximum operating frequency Duty tPLZ tPZL Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD Condition min CL = 15pF CL = 30pF CL = 50pF CL = 15pF CL = 30pF CL = 50pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25°C, CL = 50pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25°C, CL ≤ 15pF CF5009AL× SM5009AL×S SM5009AL×S – – – – – – 45 – – 40 30 40 typ 2 3.5 4 2 3.5 4 – – – – – – max 4 7 8 4 7 8 55 100 100 – – – MHz % ns ns ns ns Unit Measurement cct 3 fmax Measurement cct 3, Ta = –20 to +80°C 1. The duty cycle characteristic is checked the sample chips of each production lot. 2. Oscillator stop function is built-in. When INH goes LOW, normal output stops. When INH goes HIGH, normal output is not resumed until after the oscillator start-up time has elapsed. NIPPON PRECISION CIRCUITS INC.—13 SM5009 series 5009AN×/CN× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −20 to 80°C unless otherwise noted. Rating Parameter Symbol Condition min SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tr1 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD ,CL = 15pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tr2 Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD ,CL = 30pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tf1 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD ,CL = 15pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 SM5009AN1S, CF5009AN1 SM5009AN2S, CF5009AN2 tf2 Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD ,CL = 30pF SM5009AN3S, CF5009AN3 SM5009AN4S, CF5009AN4 SM5009AN5S, CF5009AN5 SM5009AN6S, CF5009AN6 SM5009CN1S, CF5009CN1 SM5009CN2S, CF5009CN2 CL = 30 pF, SM5009AN×S, CF5009AN× CL = 15 pF, SM5009CN×S, CF5009CN× – typ 3.5 max 9 Unit – 5 13 Output rise time – 5 12 ns – 7 16 – 3.5 9 – 5 13 Output fall time – 5 12 ns – 7 16 45 40 – – 40 30 – – – – – – 55 % 60 100 100 – MHz – ns ns Output duty cycle1 Duty Measurement cct 3, load cct 2, VDD = 3V, Ta = 25°C Output disable delay time Output enable delay time Maximum operating frequency tPLZ tPZL fmax Measurement cct 6, load cct 2, VDD = 3V, Ta = 25°C, CL ≤ 15pF SM5009AN×S, CF5009AN× Measurement cct 3 Ta = –10 to +70°C, SM5009CN×S, CF5009CN× 1. The duty cycle characteristic is checked the sample chips of each production lot. NIPPON PRECISION CIRCUITS INC.—14 SM5009 series 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Symbol tr1 Output rise time tr2 tr3 tf1 Output fall time tf2 tf3 Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Duty tPLZ tPZL fmax Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD Condition min CL = 15pF CL = 30pF CL = 50pF CL = 15pF CL = 30pF CL = 50pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25°C, CL = 50pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25°C, CL ≤ 15pF SM5009AN×S, CF5009AN× SM5009CN×S, CF5009CN× – – – – – – 45 – – 40 30 typ 2 3.5 4 2 3.5 4 – – – – – max 4 7 8 4 7 8 55 100 100 – MHz – % ns ns ns ns Unit Measurement cct 3 1. The duty cycle characteristic is checked the sample chips of each production lot. 5009AK× series VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr tf Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 1, 0.4V to 2.4V, CL = 15pF Measurement cct 3, load cct 1, 2.4V to 0.4V, CL = 15pF Measurement cct 3, load cct 1, VDD = 5V, Ta = 25°C, CL = 15pF Measurement cct 6, load cct 1, VDD = 5V, Ta = 25°C, CL ≤ 15pF Ta = –20 to +80°C Ta = –40 to +85°C – – 45 – – 40 30 typ 2 2 – – – – – max 6 6 55 100 100 – MHz – ns ns % ns ns Unit Measurement cct 3 1. The duty cycle characteristic is checked the sample chips of each production lot. NIPPON PRECISION CIRCUITS INC.—15 SM5009 series 5009AH× series 3V operation: VDD = 2.7 to 3.3V, VSS = 0V, Ta = −20 to 80°C unless otherwise noted. Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr1 tf1 Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF Measurement cct 3, load cct 2, VDD = 3V, Ta = 25°C, CL = 15pF Measurement cct 6, load cct 2, VDD = 3V, Ta = 25°C, CL ≤ 15pF Measurement cct 3 – – 45 – – 16 typ 6 6 – – – – max 18 18 55 100 100 – ns ns % ns ns MHz Unit 1. The duty cycle characteristic is checked the sample chips of each production lot. 5V operation: VDD = 4.5 to 5.5V, VSS = 0V, Ta = −40 to 85°C unless otherwise noted. Rating Parameter Output rise time Output fall time Output duty cycle1 Output disable delay time Output enable delay time Maximum operating frequency Symbol tr1 tf1 Duty tPLZ tPZL fmax Condition min Measurement cct 3, load cct 2, 0.1VDD to 0.9VDD , CL = 15pF Measurement cct 3, load cct 2, 0.9VDD to 0.1VDD , CL = 15pF Measurement cct 3, load cct 2, VDD = 5V, Ta = 25°C, CL = 15pF Measurement cct 6, load cct 2, VDD = 5V, Ta = 25°C, CL ≤ 15pF Measurement cct 3 – – 45 – – 30 typ 4 4 – – – – max 12 12 55 100 100 – ns ns % ns ns MHz Unit 1. The duty cycle characteristic is checked the sample chips of each production lot. NIPPON PRECISION CIRCUITS INC.—16 SM5009 series MEASUREMENT CIRCUITS Measurement cct 1 When measuring VOL VDD R3 Q VSS Measurement cct 4 3.0V or 5.0V VDD RUP = RUP1 When measuring VOH VDD 0V VDD VOH 0V VDD VOL 0V R2 Signal Generator R1 XT VDD IPR (VIL = 0V) VSS INH V VIH VIL XT input waveform (10MHz) RUP2 = VDD VIH IPR VIH : 2.1V(V DD = 3.0V) VIH : 3.5V(V DD = 5.0V) IPR Q output A Q output • 5009AK×, AL×, AN1, AN2 R1: 50Ω R2: 250Ω(VDD = 4.5V), 275Ω(VDD = 2.7V) R3: 256Ω(VDD = 4.5V), 288Ω(VDD = 2.7V) • 5009AN3 to AN6, CN× R1: 50Ω R2: 245Ω(VDD = 4.5V), 262Ω(VDD = 2.7V) R3: 256Ω(VDD = 4.5V), 288Ω(VDD = 2.7V) • 5009AH× R1: 50Ω R2: 1000Ω(VDD = 4.5V), 1100Ω(VDD = 2.7V) R3: 1025Ω(VDD = 4.5V), 1150Ω(VDD = 2.7V) Measurement cct 5 VDD XT Rf = XT VSS VDD IRf Measurement cct 2 IRf IZ VDD Q VSS IZ A A Measurement cct 6 V VOH VOL VDD Signal Generator XT VSS Q INH Measurement cct 3 IDD IST R1 A XT X'tal XT INH VDD Q VSS R1: 50Ω NIPPON PRECISION CIRCUITS INC.—17 SM5009 series Load cct 1 Load cct 2 R Q output CL (Including probe capacitance) Q output CL (Including probe capacitance) CL = 15pF: DUTY, IDD, tr, tf R = 400Ω CL = 15pF: DUTY, IDD, tr1, tf1 CL = 30pF: tr2, tf2 CL = 50pF: tr3, tf3 Switching Time Measurement Waveform Output duty level (CMOS) Q output 0.9VDD 0.1VDD TW 0.9VDD 0.1VDD DUTY measurement voltage (0.5V DD ) tr Output duty level (TTL) tf Q output 2.4V 0.4V TW 2.4V 0.4V DUTY measurement voltage (1.4V ) tr Output duty cycle (CMOS) tf Q output TW T DUTY measurement voltage (0.5V DD) DUTY= TW/ T 100 (%) Output duty cycle (TTL) Q output TW T DUTY measurement voltage (1.4V ) DUTY= TW/ T 100 (%) NIPPON PRECISION CIRCUITS INC.—18 SM5009 series Output Enable/Disable Delay INH VIL VIH tPLZ Q output INH input waveform tr = tf tPZL 10ns Note (AL× series only): when the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay. NIPPON PRECISION CIRCUITS INC.—19 SM5009 series Please pay your attention to the following points at time of using the products shown in this document. The products shown in this document (hereinafter “Products”) are not intended to be used for the apparatus that exerts harmful influence on human lives due to the defects, failure or malfunction of the Products. Customers are requested to obtain prior written agreement for such use from NIPPON PRECISION CIRCUITS INC. (hereinafter “NPC”). Customers shall be solely responsible for, and indemnify and hold NPC free and harmless from, any and all claims, damages, losses, expenses or lawsuits, due to such use without such agreement. NPC reserves the right to change the specifications of the Products in order to improve the characteristic or reliability thereof. NPC makes no claim or warranty that the contents described in this document dose not infringe any intellectual property right or other similar right owned by third parties. Therefore, NPC shall not be responsible for such problems, even if the use is in accordance with the descriptions provided in this document. Any descriptions including applications, circuits, and the parameters of the Products in this document are for reference to use the Products, and shall not be guaranteed free from defect, inapplicability to the design for the mass-production products without further testing or modification. Customers are requested not to export or re-export, directly or indirectly, the Products to any country or any entity not in compliance with or in violation of the national export administration laws, treaties, orders and regulations. Customers are requested appropriately take steps to obtain required permissions or approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome, Koto-ku, Tokyo 135-8430, Japan Telephone: +81-3-3642-6661 Facsimile: +81-3-3642-6698 http://www.npc.co.jp/ Email: sales@npc.co.jp NC9801GE 2003.07 NIPPON PRECISION CIRCUITS INC.—20