100364_09

100364 Low Power 16-Input Multiplexer OBSOLETE 100364 Low Power 16-Input Multiplexer General Description The 100364 is a 16-input multiplexer. Data paths are controlled by four Select lines (S0–S3). Their decoding is shown in the truth table. Output data polarity is the same as the seleted input data. All inputs have 50 kΩ pulldown resistors. May 15, 2009 ■ ■ ■ ■ ■ 2000V ESD protection Pin/function compatible with 100164 Voltage compensated operating range = −4.2V to −5.7V Available to industrial grade temperature range Standard Microcircuit Drawing (SMD) 5962-9459201 Features ■ 35% power reduction of the 100164 Logic Symbol Pin Names I0–I15 S0–S3 Z Description Data Inputs Select Inputs Data Output 10030101 Connection Diagrams 24-Pin DIP 24-Pin Quad Cerpak 10030103 10030102 © 2009 National Semiconductor Corporation 100301 Print Date/Time: 2009/05/15 10:45:59 www.national.com 100301 Version 2 Revision 2 100364 Logic Diagram 10030105 www.national.com 100301 Version 2 Revision 2 2 Print Date/Time: 2009/05/15 10:45:59 100364 Truth Table Select Inputs S0 L H L H L H L H L H L H L H L H H = HIGH Voltage Level L = LOW Voltage Level Output S2 L L L L H H H H L L L L H H H H S3 L L L L L L L L H H H H H H H H Z I0 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 I13 I14 I15 S1 L L H H L L H H L L H H L L H H 3 100301 Version 2 Revision 2 Print Date/Time: 2009/05/15 10:45:59 www.national.com 100364 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Above which the useful life may be impaired Storage Temperature (TSTG) −65°C to +150°C Maximum Junction Temperature (TJ) Ceramic +175°C Pin Potential to Ground Pin (VEE) −7.0V to +0.5V Input Voltage (DC) VEE to +0.5V Output Current (DC Output HIGH) ESD (Note 2) −50 mA ≥ 2000V Recommended Operating Conditions Case Temperature (TC) Military Supply Voltage (VEE) −55°C to +125°C −5.7V to −4.2V Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Military Version DC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −55°C to +125°C Symbol VOH Parameter Output HIGH Voltage Min −1025 −1085 VOL Output LOW Voltage −1830 −1830 VOHC Output HIGH Voltage −1035 −1085 VOLC Output LOW Voltage −1610 −1555 VIH VIL IIL IIH Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current −1165 −1830 0.50 300 450 IEE Power Supply Current −95 −35 −870 −1475 Max −870 −870 −1620 −1555 Units mV mV mV mV mV mV mV mV mV mV μA μA μA mA TC 0°C to +125°C −55°C 0°C to +125°C −55°C 0°C to +125°C −55°C 0°C to +125°C −55°C −55°C to +125°C −55°C to +125°C −55°C to +125°C 0°C to +125°C −55°C −55°C to +125°C Note 3: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals −55°C), then testing immediately without allowing for the junction temperature to stabilize due to heat dissipation after power-up. This provides “cold start” specs which can be considered a worst case condition at cold temperatures. Note 4: Screen tested 100% on each device at −55°C, +25°C, and +125°C, Subgroups, 1, 2, 3, 7 and 8. Note 5: Sampled tested (Method 5005, Table I) on each manufactured lot at −55°C, +25°C, and +125°C, Subgroups A1, 2, 3, 7 and 8. Note 6: Guaranteed by applying specified input condition and testing VOH/VOL. Conditions VIN = VIH (Max) or VIL (Min) Loading with 50Ω to −2.0V Notes (Notes 3, 4, 5) VIN = VIH (Min) or VIL (Max) Loading with 50Ω to −2.0V (Notes 3, 4, 5) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VEE = −4.2V VIN = VIL (Min) VEE = −5.7V VIN = VIH (Max) Inputs Open (Notes 3, 4, 5, 6) (Notes 3, 4, 5, 6) (Notes 3, 4, 5) (Notes 3, 4, 5) (Notes 3, 4, 5) www.national.com 100301 Version 2 Revision 2 4 Print Date/Time: 2009/05/15 10:45:59 100364 AC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay I0–I15 to Output Propagation Delay S0, S1 to Output Propagation Delay S2, S3 to Output Transition Time 20% to 80%, 80% to 20% 0.20 1.20 0.20 1.20 0.20 1.20 ns (Note 10) 0.50 2.90 0.70 2.60 0.60 3.00 ns 0.70 3.30 0.90 3.10 1.00 3.50 ns TC = −55°C Min 0.50 Max 2.60 TC = 25°C Min 0.60 Max 2.40 TC = +125°C Min 0.60 Max 2.80 ns Figures 1, 2 (Notes 7, 8, 9) Units Conditions Notes Note 7: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals −55°C), then testing immediately without allowing for the junction temperature to stabilize due to heat dissipation after power-up. This provides “cold start” specs which can be considered a worst case condition at cold temperatures. Note 8: Screen tested 100% on each device at +25°C, temperature only, Subgroup A9. Note 9: Sample tested (Method 5005, Table I) on each Mfg. lot at +25°C, Subgroup A9, and at +125°C, and −55°C temp., Subgroups A10 and A11. Note 10: Not tested at +25°C, +125°C and −55°C temperature (design characterization data). Test Circuit 10030106 FIGURE 1. AC Test Circuit 5 100301 Version 2 Revision 2 Print Date/Time: 2009/05/15 10:45:59 www.national.com 100364 Switching Waveforms 10030107 Note 11: VCC, VCCA = +2V, VEE = −2.5V Note 12: L1 and L2 = Equal length 50Ω impedance lines Note 13: RT = 50Ω terminator internal to scope Note 14: Decoupling 0.1 μF from GND to VCC and VEE Note 16: CL = Fixture and stray capacitance ≤ 3 pF Note 15: All unused outputs are loaded with 50Ω to GND Note 17: Pin numbers shown are for flatpak; for DIP see logic symbol FIGURE 2. Propagation Delay and Transition Times www.national.com 100301 Version 2 Revision 2 6 Print Date/Time: 2009/05/15 10:45:59 100364 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Ceramic Dual-In-Line Package (0.400″ Wide) (D) NS Package Number J24E 24-Lead Quad Cerpak (F) NS Package Number W24B 7 100301 Version 2 Revision 2 Print Date/Time: 2009/05/15 10:45:59 www.national.com 100364 Low Power 16-Input Multiplexer Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Amplifiers Audio Clock and Timing Data Converters Interface LVDS Power Management Switching Regulators LDOs LED Lighting Voltage Reference PowerWise® Solutions Temperature Sensors Wireless (PLL/VCO) www.national.com/amplifiers www.national.com/audio www.national.com/timing www.national.com/adc www.national.com/interface www.national.com/lvds www.national.com/power www.national.com/switchers www.national.com/ldo www.national.com/led www.national.com/vref www.national.com/powerwise WEBENCH® Tools App Notes Reference Designs Samples Eval Boards Packaging Green Compliance Distributors Quality and Reliability Feedback/Support Design Made Easy Solutions Mil/Aero PowerWise® Design University Design Support www.national.com/webench www.national.com/appnotes www.national.com/refdesigns www.national.com/samples www.national.com/evalboards www.national.com/packaging www.national.com/quality/green www.national.com/contacts www.national.com/quality www.national.com/feedback www.national.com/easy www.national.com/solutions www.national.com/milaero www.national.com/solarmagic www.national.com/training Serial Digital Interface (SDI) www.national.com/sdi www.national.com/wireless www.national.com/tempsensors SolarMagic™ THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2009 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com www.national.com Tel: 1-800-272-9959 National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com 100301 Version 2 Revision 2 Print Date/Time: 2009/05/15 10:46:00