54ACT00

54AC00/54ACT00 Quad 2-Input NAND Gate July 2003 54AC00/54ACT00 Quad 2-Input NAND Gate General Description The ’AC/’ACT00 contains four 2-input NAND gates. n Standard Microcircuit Drawing (SMD) — ’AC00: 5962-87549 — ’ACT00: 5962-87699 n 54AC00 now qualified to 300Krad RHA designation, refer to the SMD for more information Features n ICC reduced by 50% n Outputs source/sink 24 mA n ’ACT00 has TTL-compatible inputs Logic Symbol IEEE/IEC Pin Names A n, B n On Description Inputs Outputs 10025701 Connection Diagrams Pin Assignment for DIP and Flatpak Pin Assignment for LCC 10025703 10025702 FACT ® is a registered trademark of Fairchild Semiconductor Corporation. © 2003 National Semiconductor Corporation DS100257 www.national.com 54AC00/54ACT00 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) CDIP 175˚C −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V −0.5V to +7.0V Recommended Operating Conditions Supply Voltage (VCC) ’AC ’ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC/ACT Minimum Input Edge Rate (∆V/∆t) ’AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate (∆V/∆t) ’ACT Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 125 mV/ns 125 mV/ns −55˚C to +125˚C 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC ± 50 mA ± 50 mA −65˚C to +150˚C Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT ® circuits outside databook specifications. DC Characteristics for ’AC Family Devices 54AC Symbol Parameter VCC (V) VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 TA = −55˚C to +125˚C Guaranteed Limits 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 2.4 3.7 4.7 0.1 0.1 0.1 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 IIN Maximum Input Leakage Current 5.5 0.5 0.5 0.5 V µA IOL = 12 mA IOL = 24 mA IOL = 24 mA VI = VCC, GND V V IOH = −12 mA IOH = −24 mA IOH = −24 mA IOUT = 50 µA V IOUT = −50 µA V VOUT = 0.1V or VCC − 0.1V V VOUT = 0.1V or VCC − 0.1V Units Conditions ± 1.0 www.national.com 2 54AC00/54ACT00 DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) IOLD IOHD ICC Minimum Dynamic Output Current (Note 4) Maximum Quiescent Supply Current Note 2: All outputs loaded; thresholds on input associated with output under test. (Continued) 54AC TA = −55˚C to +125˚C Guaranteed Limits 5.5 5.5 5.5 50 −50 40.0 mA mA µA VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND Units Conditions Note 3: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54AC @ 25˚C is identical to 74AC @ 25˚C. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54AC @ 25˚C is identical to 74AC @ 25˚C. DC Characteristics for ’ACT Family Devices 54ACT Symbol Parameter VCC (V) VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 4.5 5.5 4.5 5.5 4.5 5.5 TA = −55˚C to +125˚C Guaranteed Limits 2.0 2.0 0.8 0.8 4.4 5.4 (Note 6) VIN = VIL or VIH 4.5 5.5 VOL Maximum Low Level Output Voltage 4.5 5.5 3.70 4.70 0.1 0.1 (Note 6) VIN = VIL or VIH 4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input Minimum Dynamic Output Current (Note 7) Maximum Quiescent Supply Current Note 6: All outputs loaded; thresholds on input associated with output under test. Note 7: Maximum test duration 2.0 ms, one output loaded at a time. Note 8: ICC for 54ACT @ 25˚C is identical to 74ACT @ 25˚C. Units Conditions V V V VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50 µA V V IOH = −24 mA IOH = −24 mA IOUT = 50 µA 0.50 0.50 V µA mA mA mA µA IOL = 24 mA IOL = 24 mA VI = VCC, GND VI = VCC − 2.1V VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND 5.5 5.5 5.5 5.5 5.5 ± 1.0 1.6 50 −50 40.0 3 www.national.com 54AC00/54ACT00 AC Electrical Characteristics 54AC VCC Symbol Parameter (V) (Note 9) Min tPLH tPHL Propagation Delay Propagation Delay 3.3 5.0 3.3 5.0 Note 9: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V TA = −55˚C to +125˚C CL = 50 pF Max 11.0 8.5 9.0 7.0 ns ns 1.0 1.5 1.0 1.5 Units Fig. No. AC Electrical Characteristics 54ACT VCC Symbol Parameter (V) (Note 10) Min tPLH tPHL Propagation Delay Propagation Delay 5.0 5.0 1.5 1.5 TA = −55˚C to +125˚C CL = 50 pF Max 9.5 8.0 ns ns Units Fig. No. Note 10: Voltage Range 5.0 is 5.0V ± 0.5V Capacitance Symbol CIN CPD Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 30.0 Units pF pF Conditions VCC = Open VCC = 5.0V www.national.com 4 54AC00/54ACT00 Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 14 Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 5 www.national.com 54AC00/54ACT00 Quad 2-Input NAND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14 Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.