74F00PC

54F/74F00 Quad 2-Input NAND Gate 54F/74F00 December 1994 54F/74F00 Quad 2-Input NAND Gate General Description This device contains four independent gates, each of which performs the logic NAND function. Features n Guaranteed 4000V minimum ESD protection Ordering Code: Commercial 74F00PC See Section 0 Military Package Number N14A 54F00DM (Note 2) J14A M14A M14D 54F00FM (Note 2) 54F00LM (Note 2) W14B E20A 14-Lead (0.300" Wide) Molded Dual-In-Line 14-Lead Ceramic Dual-In-Line 14-Lead (0.150" Wide) Molded Small Outline, JEDEC 14-Lead (0.300" Wide) Molded Small Outline, EIAJ 14-Lead Cerpack 20-Lead Ceramic Leadless Chip Carrier, Type C Package Description DSXXX 74F00SC (Note 1) 74F00SJ (Note 1) Note 1: Devices also available in 13" reel. Use suffix = SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix = DMQB, FMQB and LMQB. Logic Symbol IEEE/IEC Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak DS009454-3 DS009454-2 Pin Assignment for LCC DS009454-1 TRI-STATE ® is a registered trademark of National Semiconductor Corporation. © 1997 National Semiconductor Corporation DS009454 www.national.com 1 PrintDate=1997/08/27 PrintTime=13:03:35 9738 ds009454 Rev. No. 1 cmserv Proof 1 Unit Loading/Fan Out See Section 0 for U.L. definitions 54F/74F Pin Names An, Bn On Description Inputs Outputs U.L. HIGH/LOW 1.0/1.0 50/33.3 Input IIH/IIL Output IOH/IOL 20 µA/−0.6 mA −1 mA/20 mA DSXXX www.national.com 2 PrintDate=1997/08/27 PrintTime=13:03:36 9738 ds009454 Rev. No. 1 cmserv Proof 2 Absolute Maximum Ratings Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias Plastic VCC Pin Potential to Ground Pin Input Voltage (Note 4) Input Current (Note 4) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output TRI-STATE ® Output Current Applied to Output (Note 3) to to to to +150˚C +125˚C +175˚C +150˚C −65˚C −55˚C −55˚C −55˚C in LOW State (Max) ESD Last Passing Voltage (Min) twice the rated IOL (mA) 4000V Recommended Operating Conditions Free Air Ambient Temperature Commercial Supply Voltage Commercial 0˚C to +70˚C +4.5V to +5.5V −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA −0.5V to VCC −0.5V to +5.5V Note 3: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 4: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol VIH VIL VCD VOH Parameter Min Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage VOL IIH IBVI ICEX VID IOD IIL IOS ICCH ICCL Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current Power Supply Current −60 1.9 6.8 −0.6 −150 2.8 10.2 mA mA mA mA Max Max Max Max 74F 3.75 µA 0.0 54F 10% VCC 74F 10% VCC 74F 5% VCC 54F 10% VCC 74F 10% VCC 54F 74F 54F 74F 54F 74F 74F 4.75 2.5 2.5 2.7 0.5 0.5 20.0 5.0 100 7.0 250 50 V 0.0 IID = 1.9 µA All other pins grounded VIOD = 150 mV All other pins grounded VIN = 0.5V VOUT = 0V VO = HIGH VO = LOW µA Max VOUT = VCC µA Max VIN = 7.0V µA Max V Min V Min 2.0 0.8 −1.2 54F/74F Typ Max V V V Min Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −1 mA IOH = −1 mA IOL = 20 mA IOL = 20 mA VIN = 2.7V Units VCC Conditions AC Electrical Characteristics See Section 0 for Waveforms and Load Configurations 74F TA = +25˚C VCC = +5.0V CL = 50 pF Min tPLH tPHL Propagation Delay An, Bn to On 2.4 1.5 Typ 3.7 3.2 Max 5.0 4.3 Min 2.0 1.5 Max 7.0 6.5 Min 2.4 1.5 Max 6.0 5.3 ns kk-kk DSXXX DSXXX Symbol Parameter 54F TA, VCC = Mil CL = 50 pF 74F TA, VCC = Com CL = 50 pF Fig. Units No. Book Extract End 3 www.national.com PrintDate=1997/08/27 PrintTime=13:03:42 9738 ds009454 Rev. No. 1 cmserv Proof 3 THIS PAGE IS IGNORED IN THE DATABOOK 4 PrintDate=1997/08/27 PrintTime=13:03:43 9738 ds009454 Rev. No. 1 cmserv Proof 4 Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: Book Extract End DS009454-4 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 5 www.national.com PrintDate=1997/08/27 PrintTime=13:03:44 9738 ds009454 Rev. No. 1 cmserv Proof 5 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 14-Lead (0.150" Wide) Molded Small Outline Package, JEDEC (S) NS Package Number M14A www.national.com 6 PrintDate=1997/08/27 PrintTime=13:03:44 9738 ds009454 Rev. No. 1 cmserv Proof 6 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead (0.300" Wide) Molded Small Outline Package, EIAJ (SJ) NS Package Number M14D 14-Lead (0.300" Wide) Molded Dual-In-Line Package (P) NS Package Number N14A 7 www.national.com 7 PrintDate=1997/08/27 PrintTime=13:03:45 9738 ds009454 Rev. No. 1 cmserv Proof 7 54F/74F00 Quad 2-Input NAND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. PrintDate=1997/08/27 PrintTime=13:03:46 9738 ds009454 Rev. No. 1 cmserv Proof 8