CLC231AK

Comlinear CLC231 Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5) August 1996 N General Description Not Intended For New Designs Comlinear CLC231 Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5) Features s s s s s 165MHz closed-loop – -3dB bandwidth 15ns settling to 0.05% 1mV input offset voltage, 10µV/°C drift 100mA output current Excellent AC and DC linearity Driving flash A/D converters Precision line driving (a gain of 2 cancels matched-line losses) DAC current-to-voltage conversion Low-power, high-speed applications (50mW @ ±5V) Applications s s s s The CLC231 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions: CLC231AI -25°C to +85°C 12-pin TO-8 can CLC231A8C -55°C to +125°C 12-pin TO-8 can, MIL-STD-883, Level B CLC231AK -55°C to +125°C 12-pin TO-8 can, features burn-in and hermetic testing CLC231AM -55°C to +125°C 12-pin TO-8 can, screened to Comlinear’s M standard for high reliability DESC SMD number: 5962-89594 Typical Performance Bottom View Package Dimensions © 1996 National Semiconductor Corporation Printed in the U.S.A. http://www.national.com CLC231 Electrical Characteristics (Av = +2, Vcc = ±15V, RL = 100Ω, Rf = 250Ω; unless specified) Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Absolute Maximum Ratings http://www.national.com 2 CLC231 Typical Performance Characteristics (TA = 25°, Av = +2, VCC = ±15V, RL = 100W; unless specified) 3 http://www.national.com http://www.national.com 4 This page intentionally left blank. 5 http://www.national.com Comlinear CLC231 Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5) Customer Design Applications Support National Semiconductor is committed to design excellence. For sales, literature and technical support, call the National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018. Life Support Policy National’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of National Semiconductor Corporation. As used herein: 1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. N National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 National Semiconductor Europe Fax: (+49) 0-180-530 85 86 E-mail: europe.support.nsc.com Deutsch Tel: (+49) 0-180-530 85 85 English Tel: (+49) 0-180-532 78 32 Francais Tel: (+49) 0-180-532 93 58 Italiano Tel: (+49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block Ocean Centre, 5 Canton Road Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. http://www.national.com 6 Lit #150231-006