CLC414AJP

CLC414 Quad, Low-Power Monolithic Op Amp June 1999 N CLC414 Quad, Low-Power Monolithic Op Amp General Description Features s s s s s s s s 90MHz small signal bandwidth 2mA quiescent current per amplifier 70dB channel isolation @ 5MHz 0.1%/0.12° differential gain/phase 16ns settling to 0.1% 100V/µs slew rate 3.3ns rise and fall time (2Vpp) 70mA output current Composite video distribution amps HDTV amplifiers RGB-video amplifiers CCD signal processing Active filters Instrumentation diff. amps General purpose high density requirements Applications s s s s s s s CLC414AJP CLC414AJE CLC414ALC CLC414A8B -40°C -40°C -40°C -55°C to to to to +85°C +85°C +85°C +125°C 14-pin plastic DIP 14-pin plastic SOIC dice 14-pin hermetic CERDIP, MIL-STD-883, Level B DESC SMD number: 5962-91693 Pinout DIP & SOIC © 1999 National Semiconductor Corporation Printed in the U.S.A. http://www.national.com CLC414 Electrical Characteristics (Av = +6, Vcc = ±5V, RL = 100Ω, Rf = 500Ω; unless specified) Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Absolute Maximum Ratings Miscellaneous Ratings Package Thermal Resistance Package AJP AJE θJC 60°C/W 45°C/W θJA 110°C/W 115°C/W Reliability Information Transistor count http://www.national.com 152 2 CLC414 Typical Performance Characteristics Non-Inverting Frequency Response Vout = 2Vpp Av = 2 Rf = 1.74kΩ Vout = 2Vpp (TA = 25°, Av = +6, VCC = ±5V, RL = 100Ω, Rf = 500Ω) Inverting Frequency Response Av = -1 Rf = 1kΩ Av = -2 Rf = 1kΩ Phase (deg) Magnitude (1dB/div) Magnitude (1dB/div) 0 -90 Av = 10 Rf = 200Ω -180 -270 Av = 6 Rf = 499Ω -360 -450 100 1 Phase (deg) -180 -270 Av = -10 Rf = 499Ω -360 Av = -6 Rf = 499Ω -450 -540 -630 100 1 Frequency (MHz) 10 10 Frequency (MHz) 3 http://www.national.com http://www.national.com 4 This page intentionally left blank. 5 http://www.national.com CLC414 Quad, Low-Power Monolithic Op Amp Customer Design Applications Support National Semiconductor is committed to design excellence. For sales, literature and technical support, call the National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018. Life Support Policy National’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of National Semiconductor Corporation. As used herein: 1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. N National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 National Semiconductor Europe Fax: (+49) 0-180-530 85 86 E-mail: europe.support.nsc.com Deutsch Tel: (+49) 0-180-530 85 85 English Tel: (+49) 0-180-532 78 32 Francais Tel: (+49) 0-180-532 93 58 Italiano Tel: (+49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 2501 Miramar Tower 1-23 Kimberley Road Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. http://www.national.com 6