LM4128AMFX-2.0

LM4128 SOT-23 Precision Micropower Series Voltage Reference November 2006 LM4128 SOT-23 Precision Micropower Series Voltage Reference General Description Ideal for space critical applications, the LM4128 precision voltage reference is available in the SOT-23 surface-mount package. The LM4128’s advanced design eliminates the need for an external stabilizing capacitor while ensuring stability with capacitive loads up to 10 µF, thus making the LM4128 easy to use. Series references provide lower power consumption than shunt references, since they do not have to idle the maximum possible load current under no load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4128 ideal for battery-powered solutions. The LM4128 is available in four grades (A, B, C, and D) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.1% with guaranteed temperature coefficient of 75 ppm/°C or less, while the lowest grade parts (D) have an initial accuracy of 1.0% and a tempco of 100 ppm/°C. Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Output voltage initial accuracy 0.1% Low temperature coefficient 75 ppm/°C Low Supply Current, 60 µA Enable pin allowing a 3 µA shutdown mode Up to 20 mA output current Voltage options 1.8V, 2.048V, 2.5V, 3.0V, 3.3V, 4.096V Custom voltage options available (1.8V to 4.096V) VIN range of VREF + 400 mV to 5.5V @10 mA Stable with low ESR ceramic capacitors SOT23-5 Package −40°C to 125°C junction temperature range Applications ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Instrumentation & Process Control Test Equipment Data Acquisition Systems Base Stations Servo Systems Portable, Battery Powered Equipment Automotive & Industrial Precision Regulators Battery Chargers Communications Medical Equipment Typical Application Circuit 20211001 *Note: The capacitor CIN is required and the capacitor COUT is optional. © 2006 National Semiconductor Corporation 202110 www.national.com LM4128 Connection Diagram Top View 20211002 SOT23-5 Package NS Package Number MF05A Ordering Information Input Output Voltage Accuracy at LM4128 Supplied as 1000 units, LM4128 Supplied as 3000 units, 25°C And Temperature Coefficient Tape and Reel Tape and Reel 0.1%, 75 ppm/°C (A grade) LM4128AMF-1.8 LM4128AMF-2.0 LM4128AMF-2.5 LM4128AMF-3.0 LM4128AMF-3.3 LM4128AMF-4.1 0.2%, 75 ppm/°C (B grade) LM4128BMF-1.8 LM4128BMF-2.0 LM4128BMF-2.5 LM4128BMF-3.0 LM4128BMF-3.3 LM4128BMF-4.1 0.5%, 100 ppm/°C (C grade) LM4128CMF-1.8 LM4128CMF-2.0 LM4128CMF-2.5 LM4128CMF-3.0 LM4128CMF-3.3 LM4128CMF-4.1 1.0%, 100 ppm/°C max (D grade) LM4128DMF-1.8 LM4128DMF-2.0 LM4128DMF-2.5 LM4128DMF-3.0 LM4128DMF-3.3 LM4128DMF-4.1 LM4128AMFX-1.8 LM4128AMFX-2.0 LM4128AMFX-2.5 LM4128AMFX-3.0 LM4128AMFX-3.3 LM4128AMFX-4.1 LM4128BMFX-1.8 LM4128BMFX-2.0 LM4128BMFX-2.5 LM4128BMFX-3.0 LM4128BMFX-3.3 LM4128BMFX-4.1 LM4128CMFX-1.8 LM4128CMFX-2.0 LM4128CMFX-2.5 LM4128CMFX-3.0 LM4128CMFX-3.3 LM4128CMFX-4.1 LM4128DMFX-1.8 LM4128DMFX-2.0 LM4128DMFX-2.5 LM4128DMFX-3.0 LM4128DMFX-3.3 LM4128DMFX-4.1 Part Marking R5AA R5BA R5CA R5DA R5EA R5FA R5AB R5BB R5CB R5DB R5EB R5FB R5AC R5BC R5CC R5DC R5EC R5FC R5AD R5BD R5CD R5DD R5ED R5FD Pin Descriptions Pin # 1 2 3 4 5 Name N/C GND EN VIN VREF Function No connect pin, leave floating Ground Enable pin Input supply Reference output www.national.com 2 LM4128 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Maximum Voltage on any input Output short circuit duration Power Dissipation (TA = 25°C) (Note 2) Storage Temperature Range  Lead Temperature (soldering, 10sec) Vapor Phase (60 sec) -0.3 to 6V Indefinite 350 mW −65°C to 150°C 260°C 215°C Infrared (15sec) ESD Susceptibility (Note 3) Human Body Model 220°C 2 kV Operating Ratings Maximum Input Supply Voltage Maximum Enable Input Voltage Maximum Load Current Junction Temperature Range (TJ) 5.5V VIN 20mA −40°C to +125°C Electrical Characteristics LM4128-1.8 (VOUT = 1.8V) Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-1.8 LM4128B-1.8 LM4128C-1.8 LM4128D-1.8 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-1.8 LM4128B-1.8 LM4128C-1.8 LM4128D-1.8 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 30 25 50 75 200 170 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit 3 www.national.com LM4128 Electrical Characteristics LM4128-2.0 (VOUT = 2.048V) Limits in standard type are for TJ = 25° C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-2.0 LM4128B-2.0 LM4128C-2.0 LM4128D-2.0 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-2.0 LM4128B-2.0 LM4128C-2.0 LM4128D-2.0 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 30 25 50 75 175 190 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit www.national.com 4 LM4128 Electrical Characteristics LM4128-2.5 (VOUT = 2.5V) Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-2.5 LM4128B-2.5 LM4128C-2.5 LM4128D-2.5 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-2.5 LM4128B-2.5 LM4128C-2.5 LM4128D-2.5 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 50 25 50 75 175 275 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit 5 www.national.com LM4128 Electrical Characteristics LM4128-3.0 (VOUT = 3.0V) Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-3.0 LM4128B-3.0 LM4128C-3.0 LM4128D-3.0 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-3.0 LM4128B-3.0 LM4128C-3.0 LM4128D-3.0 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 70 25 50 75 175 285 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit www.national.com 6 LM4128 Electrical Characteristics LM4128-3.3 (VOUT = 3.3V) Limits in standard type are for TJ = 25°C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-3.3 LM4128B-3.3 LM4128C-3.3 LM4128D-3.3 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-3.3 LM4128B-3.3 LM4128C-3.3 LM4128D-3.3 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 85 25 50 75 175 310 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit 7 www.national.com LM4128 Electrical Characteristics LM4128-4.1 (VOUT = 4.096V) Limits in standard type are for TJ = 25° C only, and limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C unless otherwise specified. Minimum and Maximum limits are guaranteed through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise specified VIN = 5V and ILOAD = 0A. Symbol VREF Parameter Output Voltage Initial Accuracy LM4128A-4.1 LM4128B-4.1 LM4128C-4.1 LM4128D-4.1 TCVREF / °C (Note Temperature Coefficient 6) (A Grade - 0.1%) (B Grade - 0.2%) (C Grade - 0.5%) (D Grade - 1.0%) LM4128A-4.1 LM4128B-4.1 LM4128C-4.1 LM4128D-4.1 IQ IQ_SD ΔVREF/ΔVIN ΔVREF/ΔILOAD ΔVREF VIN - VREF VN ISC VIL VIH Supply Current Supply Current in Shutdown Line Regulation Load Regulation Long Term Stability (Note 7) Thermal Hysteresis (Note 8) Dropout Voltage (Note 9) Output Noise Voltage Short Circuit Current Enable Pin Maximum Low Input Level Enable Pin Minimum High Input Level 65 EN = 0V VREF + 400 mV ≤ VIN ≤ 5.5V 0 mA ≤ ILOAD ≤ 20 mA 1000 Hrs -40°C ≤ TJ ≤ +125°C ILOAD = 10 mA 0.1 Hz to 10 Hz 60 3 100 25 50 75 175 350 75 35 400 mV µVPP mA %V %V 120 -0.1 -0.2 -0.5 -1.0 +0.1 +0.2 +0.5 +1.0 75 75 100 100 100 7 µA µA ppm / V ppm / mA ppm ppm / °C % Conditions Min Typ Max (Note 4) (Note 5) (Note 4) Unit Note 1: Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications, see Electrical Characteristics. Note 2: Without PCB copper enhancements. The maximum power dissipation must be de-rated at elevated temperatures and is limited by TJMAX (maximum junction temperature), θJ-A (junction to ambient thermal resistance) and TA (ambient temperature). The maximum power dissipation at any temperature is: PDissMAX = (TJMAX - TA) /θJ-A up to the value listed in the Absolute Maximum Ratings. θJ-A for SOT23-5 package is 220°C/W, TJMAX = 125°C. Note 3: The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. Note 4: Limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlation using Statistical Quality Control. Note 5: Typical numbers are at 25°C and represent the most likely parametric norm. Note 6: Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔVREF is divided by the maximum ΔT. Note 7: Long term stability is VREF @25°C measured during 1000 hrs. Note 8: Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C). Note 9: Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value measured with a 5V input. www.national.com 8 LM4128 Typical Performance Characteristics for 2.5V Output Voltage vs Temperature Load Regulation 20211054 20211055 Line Regulation 0.1 - 10 Hz Noise 20211021 20211056 Output Voltage Noise Spectrum Power Supply Rejection Ratio vs Frequency 20211057 20211058 9 www.national.com LM4128 Dropout vs Load to 0.5% Accuracy Typical Long Term Stability 20211008 20211030 Supply Current vs Input Voltage Shutdown IQ vs Input Voltage 20211053 20211010 Ground Current vs Load Current Line Transient Response VIN = 3V to 5V 20211051 20211018 www.national.com 10 LM4128 Load Transient Response ILOAD = 0 to 10mA Short-Circuit Protection and Recovery 20211082 20211050 Start-Up Response 20211083 11 www.national.com LM4128 Application Information THEORY OF OPERATION The foundation of any voltage reference is the band-gap circuit. While the reference in the LM4128 is developed from the gate-source voltage of transistors in the IC, principles of the band-gap circuit are easily understood using a bipolar example. For a detailed analysis of the bipolar band-gap circuit, please refer to Application Note AN-56. SUPPLY AND ENABLE VOLTAGES To ensure proper operation, VEN and VIN must be within a specified range. An acceptable range of input voltages is VIN > VREF + 400 mV (ILOAD ≤ 10 mA) The enable pin uses an internal pull-up current source (IPULL_UP ≊ 2 µA) that may be left floating or triggered by an external source. If the part is not enabled by an external source, it may be connected to VIN. An acceptable range of enable voltages is given by the enable transfer characteristics. See the Electrical Characteristics section and Enable Transfer Characteristics figure for more detail. Note, the part will not operate correctly for VEN > VIN. COMPONENT SELECTION A small ceramic (X5R or X7R) capacitor on the input must be used to ensure stable operation. The value of CIN must be sized according to the output capacitor value. The value of CIN must satisfy the relationship CIN ≥ COUT. When no output capacitor is used, CIN must have a minimum value of 0.1 µF. Noise on the power-supply input may affect the output noise. Larger input capacitor values (typically 4.7 µF to 22 µF) may help reduce noise on the output and significantly reduce overshoot during startup. Use of an additional optional bypass capacitor between the input and ground may help further reduce noise on the output. With an input capacitor, the LM4128 will drive any combination of resistance and capacitance up to VREF/20 mA and 10 µF respectively. The LM4128 is designed to operate with or without an output capacitor and is stable with capacitive loads up to 10 µF. Connecting a capacitor between the output and ground will significantly improve the load transient response when switching from a light load to a heavy load. The output capacitor should not be made arbitrarily large because it will effect the turn-on time as well as line and load transients. While a variety of capacitor chemistry types may be used, it is typically advisable to use low esr ceramic capacitors. Such capacitors provide a low impedance to high frequency signals, effectively bypassing them to ground. Bypass capacitors should be mounted close to the part. Mounting bypass capacitors close to the part will help reduce the parasitic trace components thereby improving performance. SHORT CIRCUITED OUTPUT The LM4128 features indefinite short circuit protection. This protection limits the output current to 75 mA when the output is shorted to ground. TURN ON TIME Turn on time is defined as the time taken for the output voltage to rise to 90% of the preset value. The turn on time depends on the load. The turn on time is typically 33.2 µs when driving a 1µF load and 78.8 µs when driving a 10 µF load. Some users may experience an extended turn on time (up to 10 ms) under brown out conditions and low temperatures (-40°C). THERMAL HYSTERESIS Thermal hysteresis is defined as the change in output voltage at 25ºC after some deviation from 25ºC. This is to say that thermal hysteresis is the difference in output voltage between two points in a given temperature profile. An illustrative temperature profile is shown in Figure 1. 20211038 FIGURE 1. Illustrative Temperature Profile This may be expressed analytically as the following: Where VHYS = Thermal hysteresis expressed in ppm VREF = Nominal preset output voltage VREF1 = VREF before temperature fluctuation VREF2 = VREF after temperature fluctuation. The LM4128 features a low thermal hysteresis of 190 µV from -40°C to 125°C. TEMPERATURE COEFFICIENT Temperature drift is defined as the maximum deviation in output voltage over the operating temperature range. This deviation over temperature may be illustrated as shown in Figure 2. 20211039 FIGURE 2. Illustrative Temperature Coefficient Profile Temperature coefficient may be expressed analytically as the following: www.national.com 12 LM4128 TD = Temperature drift VREF = Nominal preset output voltage VREF_MIN = Minimum output voltage over operating temperature range VREF_MAX = Maximum output voltage over operating temperature range ΔT = Operating temperature range. The LM4128 features a low temperature drift of 75 ppm (max) to 100 ppm (max), depending on the grade, from -40°C to 125°C. LONG TERM STABILITY Long-term stability refers to the fluctuation in output voltage over a long period of time (1000 hours). The LM4128 features a typical long-term stability of 50 ppm over 1000 hours. The measurements are made using 5 units of each voltage option, at a nominal input voltage (5V), with no load, at room temperature. EXPRESSION OF ELECTRICAL CHARACTERISTICS Electrical characteristics are typically expressed in mV, ppm, or a percentage of the nominal value. Depending on the application, one expression may be more useful than the other. To convert one quantity to the other one may apply the following: ppm to mV error in output voltage: VREF is in volts (V), VERROR is in milli-volts (mV), and n is the number of bits. mV to ppm error in output voltage: Where: VREF is in volts (V) and VERROR is in milli-volts (mV). Voltage error (mV) to percentage error (percent): Where: VREF is in volts (V) and VERROR is in milli-volts (mV). PRINTED CIRCUIT BOARD and LAYOUT CONSIDERATIONS References in SOT packages are generally less prone to PC board mounting than devices in Small Outline (SOIC) packages. To minimize the mechanical stress due to PC board mounting that can cause the output voltage to shift from its initial value, mount the reference on a low flex area of the PC board, such as near the edge or a corner. The part may be isolated mechanically by cutting a U shape slot on the PCB for mounting the device. This approach also provides some thermal isolation from the rest of the circuit. Bypass capacitors must be mounted close to the part. Mounting bypass capacitors close to the part will reduce the parasitic trace components thereby improving performance. Where: VREF is in volts (V) and VERROR is in milli-volts (mV). Bit error (1 bit) to voltage error (mV): 13 www.national.com LM4128 Typical Application Circuits 20211026 FIGURE 3. Voltage Reference with Complimentary Output 20211027 FIGURE 4. Precision Voltage Reference with Force and Sense Output 20211028 FIGURE 5. Programmable Current Source www.national.com 14 LM4128 Physical Dimensions inches (millimeters) unless otherwise noted SOT23-5 Package NS Package Number MF05A 15 www.national.com LM4128 SOT-23 Precision Micropower Series Voltage Reference Notes THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2006 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530-85-86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +49 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 www.national.com