LMH0344_09

LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer July 15, 2009 LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer General Description The LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates from 125 Mbps to 2.97 Gbps and supports SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M. The LMH0344 implements DC restoration to correctly handle pathological data conditions. The equalizer may be driven in either a single ended or differential configuration. Additional features include separate carrier detect and output mute pins which may be tied together to mute the output when no signal is present. A programmable mute reference is provided to mute the output at a selectable level of signal degradation. The device is available in two space–saving packages: a 4 X 4 mm 16-pin LLP and even more space–efficient 3 x 3 mm 25-ball MICRO-ARRAY package. Features ■ SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 259M compliant Supports DVB-ASI at 270 Mbps Wide range of data rates: 125 Mbps to 2.97 Gbps Equalizes up to 120 meters of Belden 1694A at 2.97 Gbps, up to 140 meters of Belden 1694A at 1.485 Gbps, or up to 400 meters of Belden 1694A at 270 Mbps Equalizes 0-120m of Belden 1694A at 2.97 Gbps with 0.3 UI maximum output jitter Manual bypass and output mute with a programmable threshold Single-ended or differential input 50Ω differential outputs (internal 50Ω pullups) Single 3.3V supply operation 280 mW typical power consumption 16-pin LLP or 25-ball MICRO-ARRAY package Industrial temperature range: −40°C to +85°C HBM ESD Rating: 8 kV LLP version footprint compatible with the LMH0044 and LMH0074 ■ Replaces the Gennum GS2974A or GS2974B Applications ■ SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital interfaces ■ Serial digital data equalization and reception ■ Data recovery equalization Typical Application 20199001 © 2009 National Semiconductor Corporation 201990 www.national.com LMH0344 Absolute Maximum Ratings (Note 1) Supply Voltage Input Voltage (all inputs) Storage Temperature Range Junction Temperature Lead Temperature (Soldering 4 Sec) Package Thermal Resistance  θJA 16-pin LLP  θJC 16-pin LLP  θJA 25-ball MICRO-ARRAY ESD Rating (HBM) ESD Rating (MM) ESD Rating (CDM) 4.0V −0.3V to VCC+0.3V −65°C to +150°C +125°C +260°C +40°C/W +4.5°C/W +58.1°C/W 8 kV 400V 2 kV Recommended Operating Conditions Supply Voltage (VCC – VEE) Input Coupling Capacitance AEC Capacitor (Connected between AEC+ and AEC-) Operating Free Air Temperature (TA) 3.3V ±5% 1.0 µF 1.0 µF −40°C to +85°C DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Notes 2, 3). Symbol Parameter VCMIN VSDI VCMOUT VSDO Input Common Mode Voltage Input Voltage Swing Output Common Mode Voltage Output Voltage Swing MUTEREF DC Voltage (floating) MUTEREF Range CD Output Voltage MUTE Input Voltage ICC Supply Current Carrier not present Carrier present Min to mute outputs Max to force outputs active 85 MUTE 2.0 0.8 100 CD 2.4 0.4 100Ω load, differential MUTEREF At LMH0344 input, (Notes 4, 5) SDO, SDO Conditions Reference SDI, SDI 720 Min Typ 1.9 800 VCC – VSDO/2 750 1.3 0.6 950 Max Units V mVP−P V mVP-P V V V V V V mA www.national.com 2 LMH0344 AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter BRMIN BRMax Minimum Input Data Rate Maximum Input Data Rate Jitter for Various Cable Lengths 270 Mbps, Belden 1694A, 0-400 meters (Note 6) 270 Mbps, Belden 1694A, 0-400 meters (Note 7) 1.485 Gbps, Belden 1694A, 0-140 meters (Note 6) 1.485 Gbps, Belden 1694A, 0-140 meters (Note 7) 2.97 Gbps, Belden 1694A, 0-120 meters (Note 6) 2.97 Gbps, Belden 1694A, 0-120 meters (Note 7) tr,tf tOS ROUT RLIN RIN CIN Output Rise Time, Fall Time Mismatch in Rise/Fall Time Output Overshoot Output Resistance Input Return Loss Input Resistance Input Capacitance 20% – 80%, (Note 4) (Note 4) (Note 4) single-ended 5 MHz - 1.5 GHz, (Note 8) 1.5 GHz - 3.0 GHz, (Note 8) single-ended single-ended SDI, SDI 15 10 1.3 1 SDO, SDO 0.18 60 2 1 50 130 15 5 0.08 0.3 0.07 0.25 Conditions Reference SDI, SDI Min Typ 125 2970 0.2 Max Units Mbps Mbps UI UI UI UI UI UI ps ps % Ω dB dB kΩ pF Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25°C. Note 4: Specification is guaranteed by characterization. Note 5: This specification is for 0m cable only. Note 6: Based on characterization data over the full range of recommended operating conditions of the device. Jitter is measured in accordance with SMPTE RP 184, SMPTE RP 192, and the applicable serial data transmission standard: SMPTE 424M, SMPTE 292M, or SMPTE 259M. Note 7: Measured with Pseudo Matrix Pathological test signal. Note 8: Input return loss is dependent on board design. The LMH0344 exceeds this specification on the SD344 evaluation board with a return loss network consisting of an 8.2 nH inductor in parallel with a 0.5 pF capacitor in parallel with the 75Ω series resistor on the input. Typical Performance Characteristics After Equalization: 120m of Belden 1694A with 2.97 Gbps PRBS After Equalization: 120m of Belden 1694A with 2.97 Gbps Pseudo Matrix Pathological 20199004 20199005 3 www.national.com LMH0344 Connection Diagrams 20199003 The exposed die attach pad is a negative electrical terminal for this device. It should be connected to the negative power supply voltage. 16-Pin LLP Order Number LMH0344SQ See NS Package Number SQB16A 20199006 25-Ball MICRO-ARRAY Order Number LMH0344GR See NS Package Number GRA25A www.national.com 4 LMH0344 Pin Descriptions LLP Pin 2 3 5 6 7 8 MICROARRAY Ball C1 D1 E2 E3 D3 E4 SDI SDI AEC+ AECBYPASS MUTEREF Name Description Serial data true input. Serial data complement input. AEC loop filter external capacitor (1µF) positive connection. AEC loop filter external capacitor (1µF) negative connection. Bypasses equalization and DC restoration when high. No equalization occurs in this mode. Mute reference. Sets the threshold for CD and (with CD tied to MUTE) determines the maximum cable to be equalized before muting. MUTEREF may be either unconnected or connected to ground for maximum equalization. Serial data complement output. Serial data true output. Output mute. To disable the mute function and enable the output, MUTE must be tied to GND or a low level signal. To force the outputs to a muted state, tie to VCC. CD may be tied to this pin to inhibit the output when no input signal is present. MUTE has no function in BYPASS mode. Carrier detect. CD is high when no signal is present. CD has no function in BYPASS mode. Positive power supply (+3.3V). Negative power supply (ground). No connect. 10 11 14 D5 C5 B3 SDO SDO MUTE 15 13, 16 DAP, 1, 4, 9, 12 — A2 CD A1, A3, A4, B2 VCC B1, B4, D2, E5 VEE A5, B5, C2, NC C3, C4, D4, E1 5 www.national.com LMH0344 Block Diagram 20199002 Device Operation BLOCK DESCRIPTION The Equalizer Filter block is a multi-stage adaptive filter. If Bypass is high, the equalizer filter is disabled. The DC Restoration / Level Control block receives the differential signals from the equalizer filter block. This block incorporates a self-biasing DC restoration circuit to fully DC restore the signals. If Bypass is high, this function is disabled. The signals before and after the DC Restoration / Level Control block are used to generate the Automatic Equalization Control (AEC) signal. This control signal sets the gain and bandwidth of the equalizer filter. The loop response in the AEC block is controlled by an external 1µF capacitor placed across the AEC+ and AEC- pins. The Carrier Detect / Mute block generates the carrier detect signal and controls the mute function of the output. This block utilizes the CD and MUTE signals along with Mute Reference (MUTEREF). The Output Driver produces SDO and SDO. MUTE REFERENCE (MUTEREF) The mute reference sets the threshold for CD and (with CD tied to MUTE) determines the amount of cable to equalize before automatically muting the outputs. This is set by applying a voltage inversely proportional to the length of cable to equalize. The applied voltage must be greater than the MUTEREF floating voltage (typically 1.3V) in order to change the CD threshold. As the applied MUTEREF voltage is increased, the amount of cable that can be equalized before carrier detect is de-asserted and the outputs are muted is decreased. MUTEREF may be left unconnected or connected to ground for maximum equalization before muting. CARRIER DETECT (CD) AND MUTE Carrier detect CD indicates if a valid signal is present at the LMH0344 input. If MUTEREF is used, the carrier detect threshold will be altered accordingly. CD provides a high voltage when no signal is present at the LMH0344 input. CD is low when a valid input signal is detected. MUTE can be used to manually mute or enable SDO and SDO. Applying a high input to MUTE will mute the LMH0344 outputs by forcing the output to a logic zero. Applying a low input will force the outputs to be active. CD and MUTE may be tied together to automatically mute the output when no input signal is present. INPUT INTERFACING The LMH0344 accepts either differential or single-ended input. The input must be AC coupled. Transformer coupling is not supported. The LMH0344 correctly handles equalizer pathological signals for standard definition and high definition serial digital video, as described in SMPTE RP 178 and RP 198, respectively. OUTPUT INTERFACING The SDO and SDO outputs are internally loaded with 50Ω. They produce a 750 mVP-P differential output, or a 375 mVP-P single-ended output. www.national.com 6 LMH0344 Physical Dimensions inches (millimeters) unless otherwise noted 16-Pin LLP Order Number LMH0344SQ NS Package Number SQB16A 25-Ball MICRO-ARRAY Order Number LMH0344GR NS Package Number GRA25A 7 www.national.com LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Amplifiers Audio Clock and Timing Data Converters Interface LVDS Power Management Switching Regulators LDOs LED Lighting Voltage Reference PowerWise® Solutions Temperature Sensors Wireless (PLL/VCO) www.national.com/amplifiers www.national.com/audio www.national.com/timing www.national.com/adc www.national.com/interface www.national.com/lvds www.national.com/power www.national.com/switchers www.national.com/ldo www.national.com/led www.national.com/vref www.national.com/powerwise WEBENCH® Tools App Notes Reference Designs Samples Eval Boards Packaging Green Compliance Distributors Quality and Reliability Feedback/Support Design Made Easy Solutions Mil/Aero PowerWise® Design University Design Support www.national.com/webench www.national.com/appnotes www.national.com/refdesigns www.national.com/samples www.national.com/evalboards www.national.com/packaging www.national.com/quality/green www.national.com/contacts www.national.com/quality www.national.com/feedback www.national.com/easy www.national.com/solutions www.national.com/milaero www.national.com/solarmagic www.national.com/training Serial Digital Interface (SDI) www.national.com/sdi www.national.com/wireless www.national.com/tempsensors SolarMagic™ THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2009 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com