LMS1585AEP/LMS1587EP Enhanced Plastic 5A and 3A Low Dropout Fast Response Regulators
June 2004
LMS1585AEP/LMS1587EP Enhanced Plastic 5A and 3A Low Dropout Fast Response Regulators
General Description
The LMS1585AEP and LMS1587EP are low dropout positive regulators with output load current of 5A and 3A respectively. Their low dropout voltage (1.2V) and fast transient response make them an excellent solution for low voltage microprocessor applications. The LMS1585AEP/87EP are available in adjustable versions, which can set the output voltage with only two external resistors. In addition, they are also available in 1.5V and 3.3V fixed voltage versions (Note 12). The LMS1585AEP/87EP circuits include a zener trimmed bandgap reference, current limiting and thermal shutdown. The LMS1585AEP/87EP series are available in TO-220 and TO-263 packages. ENHANCED PLASTIC • Extended Temperature Performance of −40˚C to 125˚C • Baseline Control - Single Fab & Assembly Site • Process Change Notification (PCN) • Qualification & Reliability Data • Solder (PbSn) Lead Finish is standard • Enhanced Diminishing Manufacturing Sources (DMS) Support
Features
n n n n n Fast transient response Available in Adjustable, 1.5V, and 3.3V versions Current limiting and thermal protection Line regulation 0.005% (typical) Load regulation 0.05% (typical)
Applications
n Low voltage logic supplies n Selected Military Applications n Selected Avionics Applications
Ordering Information
PART NUMBER LMS1585AIS33EP LMS1585AISADJEP LMS1587ISXADJEP (Notes 1, 2) VID PART NUMBER V62/04639-01 V62/04639-02 V62/04639-03 TBD NS PACKAGE NUMBER (Note 3) TS3B TS3B TS3B TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: LMS1585ACT3.3EP, LMS1585ACTADJEP, LMS1585AIT1.5EP, LMS1585AIT3.3EP, LMS1585AITADJEP, LMS1585ACS1.5EP, LMS1585ACS3.3EP, LMS1585ACSADJEP, LMS1585AIS1.5EP, LMS1585ACSX33EP, LMS1585CSXADJEP, LMS1585AISX15EP, LMS1585AISX33EP, LMS1585ASXADJEP, LMS1587CT1.5EP, LMS1587CT3.3EP, LMS1587CTADJEP, LMS1587IT1.5EP, LMS1587IT3.3EP, LMS1587ITADJEP, LMS1587CS1.5EP, LMS1587CS3.3EP, LMS1587CSADJEP, LMS1587IS1.5EP, LMS1587IS3.3EP, LMS1587ISADJEP, LMS1587CSX3.3EP, LMS1587CSXADJEP, LMS1587ISX1.5EP, LMS1587ISX3.3EP. Parts listed with an "X" are provided in Tape & Reel and parts without an "X" are in Rails. Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/ mil Note 3: Refer to package details under Physical Dimensions
© 2004 National Semiconductor Corporation
DS200998
www.national.com
LMS1585AEP/LMS1587EP Enhanced Plastic
Typical Application
20099801
Connection Diagrams
TO-220 TO-263
20099836
Top View
20099835
Top View
Simplified Schematic
20099814
www.national.com
2
LMS1585AEP/LMS1587EP Enhanced Plastic
Absolute Maximum Ratings (Note 4)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Maximum Input to Output Voltage (VIN to GND) 13V
Power Dissipation (Note 5) Junction Temperature (TJ) (Note 5) Storage Temperature Range Lead Temperature ESD Tolerance (Note 6)
Internally Limited 150˚C -65˚C to 150˚C 260˚C, 10 sec 2000V
Electrical Characteristics
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for Enhanced Plastic. Symbol VREF Parameter Reference Voltage Conditions LMS1585A-ADJEP VIN−VOUT = 3V, IOUT = 10mA 10mA ≤ IOUT ≤ 5A, 1.5V ≤ VIN−VOUT ≤ 5.75V LMS1587-ADJEP 10mA ≤ IOUT ≤ 3A, 1.5V ≤ VIN−VOUT ≤ 5.75V VOUT Output Voltage LMS1585A-1.5EP IOUT = 0mA, VIN = 5V 0 ≤ IOUT ≤ 5A, 3V ≤ VIN ≤ 7V LMS1585A-3.3EP IOUT = 0mA, VIN = 5V 0 ≤ IOUT ≤ 5A, 4.75V ≤ VIN ≤ 7V LMS1587-1.5EP VIN = 5V, IOUT = 0mA, TJ = 25˚C 0≤ IOUT ≤ 3A, 3V ≤ VIN ≤ 7V LMS1587-3.3EP 0 ≤ IOUT ≤ 3A, 4.75V ≤ VIN ≤ 7V ∆VOUT Line Regulation (Note 9) LMS1585AEP/87-ADJEP IOUT = 10mA, 2.75V ≤ VIN ≤ 7V LMS1585AEP/87-3.3EP IOUT = 0mA, 4.75V ≤ VIN ≤ 7V LMS1585AEP/87-1.5EP IOUT = 0mA, 3V ≤ VIN ≤ 7V ∆VOUT Load Regulation (Note 9) LMS1585A-ADJEP VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 5A LMS1585A-1.5EP/LMS1585A-3.3EP VIN = 5V, 0 ≤ IOUT ≤ 5A LMS1587-ADJEP VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 3A LMS1587-1.5EP/LMS1587-3.3EP VIN = 5V, 0 ≤ IOUT ≤ 3A VIN−VOUT Dropout Voltage LMS1585A-ADJEP/LMS1587-ADJEP ∆VREF = 1%, IOUT = 3A LMS1585A-3.3EP/LMS1587-3.3EP/ LMS1585A-1.5EP/LMS1587-1.5EP ∆VOUT = 1%, IOUT = 3A LMS1585A-ADJEP ∆VREF = 1%, IOUT = 5A LMS1585A-1.5EP/LMS1585A-3.3EP ∆VOUT = 1%, IOUT = 5A Min (Note 8) 1.238 1.225 1.225 1.485 1.470 3.267 3.235 1.485 1.470 3.235 Typ (Note 7) 1.25 1.250 1.250 1.500 Max (Note 8) 1.262 1.275 1.275 1.515 1.530 3.333 3.365 1.515 1.530 3.365 0.2 0.2 0.2 0.3 0.5 0.3 0.5 0.3 0.5 0.3 0.5 1.3 Units
V V V V V V V V V V % % % % %
3.300 3.300 1.500 1.500 3.300 0.005 0.005 0.005 0.05 0.05 0.05 0.05 0.05 0.05 0.05 1.15
% % % V
1.15 1.2 1.2
1.3 1.4 1.4
V V V
3
www.national.com
LMS1585AEP/LMS1587EP Enhanced Plastic
Electrical Characteristics
(Continued) Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for Enhanced Plastic. Parameter Current Limit Conditions LMS1585A-ADJEP/LMS1585A-3.3EP/ LMS1585A-1.5EP VIN−VOUT = 5.5V LMS1587-ADJEP/LMS1587-3.3EP/ LMS1587-1.5EP VIN−VOUT = 5.5V Minimum Load Current (Note 10) Quiescent Current LMS1585AEP/87-ADJEP 1.5V ≤ VIN−VOUT ≤ 5.75V LMS1585A-3.3EP/LMS1587-3.3EP/ LMS1585A-1.5EP/LMS1587-1.5EP VIN = 5V TA = 25˚C, 30ms Pulse LMS1585A-ADJEP fRIPPLE = 120Hz, VIN−VOUT = 3V, IOUT = 5A, COUT = 25µF Tantalum LMS1585A-1.5EP fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 5A, VIN = 4.5V LMS1585A-3.3EP fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 5A, VIN = 6.3V LMS1587-ADJEP fRIPPLE = 120Hz, VIN−VOUT = 3V, IOUT = 3A COUT = 25µF Tantalum LMS1587-1.5EP fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 3A, VIN = 4.5V LMS1587-3.3EP fRIPPLE = 120Hz, COUT = 25µF Tantalum, IOUT = 3A, VIN = 6.3V Adjust Pin Current Adjust Pin Current Temperature Stability Long Term Stability RMS Output Noise (% of VOUT) Thermal Resistance Junction-to-Case TA = 125˚C, 1000Hrs 10Hz ≤ f ≤ 10kHz 3-Lead TO-263: Control/Output Section 3-Lead TO-220: Control/Output Section 10mA ≤ IOUT ≤ IFULLLOAD, 1.5V ≤ VIN−VOUT ≤ 5.75V (Note 11) Min (Note 8) Typ (Note 7) Max (Note 8) Units
Symbol ILIMIT
5.0
6.6
A
3.1
4.3 2.0 10.0
A mA
7.0 0.003
13.0
mA %/W
Thermal Regulation Ripple Rejection
72
dB
60
72
dB
72
dB
72
dB
60
72
dB
72 55 0.2 0.5 0.03 0.003 0.65/2.7 0.65/2.7 120
dB µA µA % % % ˚C/W ˚C/W
Note 4: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. Note 5: The maximum power dissipation is a function of TJ(max) , θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)–T A)/θJA. All numbers apply for packages soldered directly into a PC board. Note 6: For testing purposes, ESD was applied using human body model, 1.5kΩ in series with 100pF. Note 7: Typical Values represent the most likely parametric norm. Note 8: All limits are guaranteed by testing or statistical analysis. Note 9: Load and line regulation are measured at constant junction temperature, and are guaranteed up to the maximum power dissipation of 30W. Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note 10: The minimum output current required to maintain regulation. Note 11: IFULLLOAD is 5A for LMS1585AEP and 3A for LMS1587EP. Note 12: Consult factory for other fixed voltage options.
www.national.com
4
LMS1585AEP/LMS1587EP Enhanced Plastic
Application Note
Output Voltage The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal. As shown in Figure 1, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage. The current IADJ from the adjustment terminal introduces an output error. But since it is small (120µA max), it becomes negligible when R1 is in the 100Ω range. For fixed voltage devices, R1 and R2 are integrated inside the devices.
20099872
FIGURE 1. Basic Adjustable Regulator
5
www.national.com
LMS1585AEP/LMS1587EP Enhanced Plastic
Physical Dimensions
unless otherwise noted
inches (millimeters)
3-Pin TO-263 NS Package Number TS3B
www.national.com
6
LMS1585AEP/LMS1587EP Enhanced Plastic 5A and 3A Low Dropout Fast Response Regulators
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
3-Pin TO-220 NS Package Number T03B
LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.