MN54F32-X

MILITARY DATA SHEET MN54F32-X REV 1A0 QUAD 2-INPUT OR GATE General Description This device contains four independent gates, each of which performs the logic OR function. Original Creation Date: 03/12/96 Last Update Date: 07/30/96 Last Major Revision Date: 03/12/96 Industry Part Number 54F32 NS Part Numbers 54F32DMQB 54F32FMQB 54F32LMQB Prime Die M032 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MN54F32-X REV 1A0 MILITARY DATA SHEET (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) ESD Last Passing Voltage (Min) 4000V Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these condtions is not implied. Either voltage limit or current limit is sufficient to protect inputs. -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 2 MN54F32-X REV 1A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL IIH IBVI IIL VOL VOH IOS VCD ICCH ICCL ICEX PARAMETER Input High Current Input High Current Input LOW Current Output LOW Voltage Output HIGH Voltage Short-Circuit Current Input Clamp Diode Voltage Supply Current Supply Current Output HIGH Leakage Current CONDITIONS VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V VCC=5.5V, VM=7.0V, VINH=5.5V, VINL=0.0V VCC=5.5V, VM=0.5V, VINH=5.5V VCC=4.5V, VIL=0.8V, IOL=20mA, VINH=5.5V VCC=4.5V, VIH=2.0V, IOH=-1.0mA, VINH=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VM=0.0V VCC=4.5V, IM=-18mA, VINH=5.5V VCC=5.5V, VINL=0.0V, VINH=5.5V VCC=5.5V, VINL=0.0V VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V NOTES PINNAME MIN MAX 20 100 -0.6 0.5 UNIT uA uA mA V V -150 -1.2 9.2 15.5 250 mA V mA mA uA SUBGROUPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 3 INPUTS 1, 3 INPUTS 1, 3 INPUTS 1, 3 OUTPUTS 1, 3 OUTPUTS 2.5 1, 3 OUTPUTS -60 1, 3 INPUTS 1, 3 VCC 1, 3 VCC 1, 3 OUTPUTS AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 An/Bn to On 2, 4 An/Bn to On tpHL Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 An/Bn to On 2, 4 An/Bn to On Note 1: Note 2: Note 3: Note 4: 3.0 3.0 3.0 2.5 5.6 7.5 5.3 7.5 ns ns ns ns 9 10, 11 9 10, 11 Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and at +125C & -55C temperature, subgroups 10 & 11. 3