MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0
Original Creation Date: 08/06/98 Last Update Date: 08/18/99 Last Major Revision Date: 08/06/98
HIGH-SPEED, PROGRAMMABLE-SUPPLY CURRENT, MONOLITHIC OP AMP
General Description
The CLC505 is a monolithic, high-speed op amp with a unique combination of high performance, low power consumption, and flexibility of operation. With a 10 to 1 range of supply current programmability (not preset currents, but rather a continuous range "programmed" with a single external resistor, (Rp), this amplifier can be used in a wide variety of high-performance applications. Performance (typical) at any supply current is exceptional. Even at 10mW power consumption, the CLC505 provides performance far beyond other monolithic op amps, many of which consume nearly 100 times as much power. The CLC505's combination of high performance, low power consumption, and large signal performance makes the CLC505 ideal for many demanding applications in which power consumption must be minimized. Examples include a variety of remote site equipment such as battery-powered test instrumentation and communications gear. Power is also critical in applications requiring many channels, such as video switching matrices, ATE, and phased-array radar systems.
Industry Part Number
CLC505A
NS Part Numbers
CLC505AJ-QML
Prime Die
VB1929B
Controlling Document
5962-9099301MPA
Processing
MIL-STD-883, Method 5004
Subgrp Description
1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at
Temp ( oC)
+25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Features
10mW power consumption with 50MHz BW Single-resistor programming of supply current 3.4 mA Icc provides 100Mhz bandwidth and 14ns settling (0.05%) Fast disable capability 0.04% differential gain at Icc = 3.4mA 0.06% differential phase at Icc = 3.4mA
Applications
Low-power/battery applications Remote site instrumentation Mobile communications gear Video switching matrix Phased-array radar
2
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1) Supply Voltage (Vs) +7V dc Output Current (Iout) 70mA Common Mode Input Voltage (Vcm) +7V dc Differential Input Voltage (Vid) 10V dc Power Dissipation (Pd) (Note 2) 1.2W Junction Temperature +175 C Storage Temperature Range -65 C to +150 C Lead Temperature (soldering, 10 seconds) +300 C Thermal Resistance Junction-to-ambient (ThetaJA) Ceramic DIP (Still Air) (500 LFPM) Junction-to-case (ThetaJC) Ceramic DIP Package Weight (Typical) CERAMIC DIP ESD Tolerance (Note 3)
TBD TBD TBD
TBD
2000V Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 100pF discharged through 1.5k Ohms.
Note 2:
Note 3:
3
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Recommended Operating Conditions
Supply Voltage (Vs) +5V dc Gain Range (Av) +2 to +21 and -1 to -20 Ambient Operating Temperature Range (Ta) -55 C to +125 C
4
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL +Iin PARAMETER Input Bias Current (noninverting) CONDITIONS Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1 1 Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 -Iin Input Bias Current (inverting) Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = PINNAME MIN -18 -36 -6 -12 -2.5 -3.0 -5 -38 -40 -60 -14 -15 -22 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 Vio Input Offset Voltage Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Rs = 50Ohms 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms, Rs = 50Ohms Rl = -7 -11 -10 -8.0 -14.0 -12.8 -7.0 -13.0 -11.8 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Rs = 50Ohms 1 1 1 -7.0 -14.5 -13.0 MAX +18 +36 +6 +12 +2.5 +3.0 +5 +38 +40 +60 +14 +15 +22 +7 +11 +10 +8.0 +14.0 +12.8 +7.0 +13.0 +11.8 +7.0 +14.5 +13.0 UNIT uA uA uA uA uA uA uA uA uA uA uA uA uA uA uA uA mV mV mV mV mV mV mV mV mV SUBGROUPS 1, 2 3 1, 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
5
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Tc (+Iin) PARAMETER Average +Input Bias Current Drift CONDITIONS Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 Tc (-Iin) Average -Input Bias Current Drift Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 Tc (Vio) Average Offset Voltage Drift Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 1 1 1 Rp = 100kOhms, no load PINNAME MIN -100 -225 -50 -75 -30 -32 -125 -275 -60 -100 -35 -38 -50 -60 -75 MAX +100 +225 +50 +75 +30 +32 +125 +275 +60 +100 +35 +38 +50 +60 +75 11 12 3.8 4.2 Rp = 300kOhms, no load 1 1 PSRR Power Supply Rejection Ratio Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V 1 1 2 2 1 1 48 45 48 45 48 45 1.3 1.4 UNIT SUBGROUPS
nA/C 2 nA/C 3 nA/C 2 nA/C 3 nA/C 2 nA/C 3 nA/C 2 nA/C 3 nA/C 2 nA/C 3 nA/C 2 nA/C 3 uV/C 2, 3 uV/C 2, 3 uV/C 2, 3 mA mA mA mA mA mA dB dB dB dB dB dB 1, 3 2 1, 3 2 1 2, 3 1 2, 3 1 2, 3 1 2, 3
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Icc Supply Current Rp = 33kOhms, no load
6
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL CMRR PARAMETER Common Mode Rejection Ratio CONDITIONS Icc = 9mA, Vcm = +1V, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Vcm = +1V, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, Vcm = +1V, Rp = 300kOhms, Rl = 1kOhms +Rin Input Resistance Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1 1 1 1 1 1 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 Rout Output Impedance at dc Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 Cin Input Capacitance Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Ta = +25 C Icc = 3.4mA, Rp = 100kOhms, 500Ohms, Ta = +25 C Rl = 1 1 1 PINNAME MIN 48 45 48 45 48 45 800 1600 400 2 4 1 5 10 2.5 0.3 0.2 1.2 0.5 0.2 1.6 1.0 0.5 3.0 2 2 2 MAX UNIT dB dB dB dB dB dB SUBGROUPS 4 5, 6 4 5, 6 4 5, 6
kOhms 1 kOhms 2 kOhms 3 MOhms 1 MOhms 2 MOhms 3 MOhms 1 MOhms 2 MOhms 3 Ohms 1 Ohms 2 Ohms 3 Ohms 1 Ohms 2 Ohms 3 Ohms 1 Ohms 2 Ohms 3 pF pF pF 4 4 4
Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Ta = +25 C
7
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Vout PARAMETER Output Voltage Swing CONDITIONS Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 2 2 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 Iout Output Current Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 CMIR Common Mode Input Voltage Range Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 1 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = 1 1 1 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 PINNAME MIN 2.7 2.5 2.7 2.5 2.5 1.2 36 36 18 18 18 9 5 5 2.5 -1.8 -2.0 -1.5 -1.8 -2.0 -1.5 -1.8 -2.0 -1.5 +1.8 +2.0 +1.5 +1.8 +2.0 +1.5 +1.8 +2.0 +1.5 MAX UNIT V V V V V V mA mA mA mA mA mA mA mA mA V V V V V V V V V SUBGROUPS 4, 5 6 4, 5 6 4, 5 6 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
8
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL SSBW PARAMETER Small Signal Bandwidth CONDITIONS -3dB bandwidth, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1 1 1 -3dB bandwidth, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 2 -3dB bandwidth, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms LSBW Large Signal Bandwidth -3dB bandwidth, Vout < 5Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms -3dB bandwidth, Vout < 5Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms -3dB bandwidth, Vout < 5Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms GFPL Gain Flatness Peaking Low 0.1Mhz to 25MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 0.1Mhz to 20MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 0.1Mhz to 10MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms GFPH Gain Flatness Peaking High >25MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms >20MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 >10MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PINNAME MIN 115 100 115 80 65 80 35 30 95 80 50 40 20 18 0.3 0.4 0.2 0.3 0.1 0.2 0.5 0.6 0.4 0.5 0.2 0.3 MAX UNIT MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz dB dB dB dB dB dB dB dB dB dB dB dB SUBGROUPS 4 5 6 4 5 6 4 5, 6 4, 6 5 4, 6 5 4 5 4 5, 6 4 5, 6 4 5, 6 4 5, 6 4 5, 6 4 5, 6
9
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL GFR PARAMETER Gain Flatness Rolloff CONDITIONS 0.1Mhz to 50MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 0.1Mhz to 40MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 2 0.1Mhz to 20MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms LPD Linear Phase Deviation < 50MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms < 40MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms < 20MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms HD2 2nd Harmonic Distortion 2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 2Vpp at 10MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 2 2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms HD3 3rd Harmonic Distortion 2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 2Vpp at 10MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2 2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.0 1.2 1.0 1.2 0.8 1.0 -45 -40 -45 -45 -40 -45 -40 -55 -55 -55 -55 NOTES 1 1 PINNAME MIN MAX 1.0 1.3 1.0 1.3 1.0 1.0 1.3 UNIT dB dB dB dB dB dB dB Deg Deg Deg Deg Deg Deg dBc dBc dBc dBc dBc dBc dBc dBc dBc dBc dBc SUBGROUPS 4, 6 5 4 5 6 4, 6 5 4, 6 5 4, 6 5 4, 6 5 4, 5 6 4 5 6 4, 5 6 4, 5, 6 4 5, 6 4, 5, 6
10
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL NF PARAMETER Noise Floor CONDITIONS > 1 MHz, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms NOTES 1, 4 1, 4 > 1 MHz, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 1, 4 1, 4 > 1 MHz, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1, 4 1, 4 INV Noise Floor 1MHz to 200MHz, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1MHz to 200MHz, Icc = 3.4mA, Rp = 100kOhms, Rl =500Ohms 1MHz to 200MHz, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms SR Slew Rate Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Av = +2, Vout = 3V, measured at +1V Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, Av = +2, Vout = 3V, measured at +1V Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Av = +2, Vout = 3V, measured at +1V Ts Settling Time Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, 2V step at +0.1% of the fixed value Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, 2V step at +0.05% of the fixed value Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, 2V step at +0.05% of the fixed value 1, 4 1, 4 1, 4 1, 4 1, 4 1, 4 1 1 1 1 1 1 1 1 1200 1000 800 700 600 500 16 22 PINNAME MIN MAX -154 -153 -153 -152 -150 -149 65 70 70 80 70 80 UNIT dBm 1Hz dBm 1Hz dBm 1Hz dBm 1Hz dBm 1Hz dBm 1Hz uV uV uV uV uV uV SUBGROUPS 4, 6 5 4, 6 5 4, 6 5 4, 6 5 4, 6 5 4, 6 5
V/us 9, 10 V/us 11 V/us 9, 10 V/us 11 V/us 9, 10 V/us 11 ns ns 9, 10, 11 9, 10, 11 9, 10 11
1 1
60 70
ns ns
11
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Tf PARAMETER Rise and Fall Time CONDITIONS Icc = 9mA, 2V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 2V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 2V step, Rp = 300kOhms, Rl = 1kOhms Tr Rise and Fall Time Icc = 9mA, 5V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 5V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 5V step, Rp = 300kOhms, Rl = 1kOhms OS Overshoot Icc = 9mA, 2V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 2V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 2V step, Rp = 300kOhms, Rl = 1kOhms Note 1: Note 2: Note 3: Note 4: NOTES 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PINNAME MIN MAX 3.0 3.5 4.4 5.4 10 12 3.7 4.4 7.0 8.8 18 20 12 15 10 12 5 8 UNIT ns ns ns ns ns ns ns ns ns ns ns ns % % % % % % SUBGROUPS 9, 11 10 9, 11 10 9 10, 11 9, 11 10 9, 11 10 9 10, 11 9 10, 11 9 10, 11 9 10, 11
If not tested, shall be guaranteed to the limits specified in table I herein. Group A testing only. The algebraic convention, whereby the most negative value is a minimum and the most positive is a maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal. Noise tests are performed from 1MHz to 200MHz for Icc = 9mA, 1MHz to 200MHz for Icc = 3.4mA, and 1MHz to 100MHz for Icc = 1mA.
12
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Graphics and Diagrams
GRAPHICS# 07076HRA2 J08ARL P000408A CERDIP (J), 8 LEAD (B/I CKT) CERDIP (J), 8 LEAD (P/P DWG) CERDIP (J), 8 LEAD (PINOUT) DESCRIPTION
See attached graphics following this page.
13
N/C VINV VNON-INV -VCC
1 2 3 4
8 7 6 5
Rp +VCC VOUT N/C
CLC505J 8 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000408A
MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050
N
MNCLC505A-X REV 0A0
MICROCIRCUIT DATA SHEET
Revision History
Rev
0A0
ECN #
Rel Date
Originator
Shaw Mead
Changes
Initial MDS Release
M0003517 08/18/99
14
