NLE-L100M105X11F

Miniature Aluminum Electrolytic Capacitors LOW LEAKAGE CURRENT AND LONG LIFE ALUMINUM ELECTROLYTIC CAPACITORS, POLARIZED, RADIAL LEADS FEATURES • LOW LEAKAGE CURRENT & LOW NOISE • CLOSE TOLERANCE AVAILABLE (±10%) • NEW REDUCED SIZES (Alternate Sizes on Request) CHARACTERISTICS Rated Working Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 minutes At 20oC Surge Voltage & Dissipation Factor (Tan δ) Low Temperature Stability (Impedance Ratio @ 120Hz) Life Test @ 85oC 2,000 Hours for 5-10φmm size 4,000 Hours for 12.5φmm & over 10 ~ 50Vdc 0.1 ~ 2200µF -40oC~+85oC ±20% (M), ±10% (K) 0.002CV or 0.4µA Whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz W.V. (Vdc) Z-20oC/Z+20oC Z-40oC/Z+20oC Capacitance Change Dissipation Factor Leakage Current NLE-L Series 10 13 0.16 10 2 5 16 25 35 50 20 32 44 63 0.13 0.12 0.10 0.08 16 25 35 50 1.5 1.5 1.5 1.5 4 3 3 3 Within +20% of initial value Less than 200% of specified maximum value Less than specified maximum value MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 85oC) ��� �µ�� ��� ���� ���� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ���� ���� ������� ������� ����� �� � � � � � � � � � � � ��� ��� ��� ��� ��� ��� ���� �� � � � � � � � � �� �� ��� ��� ��� ��� ��� ��� ��� ���� �� � � � � � � � �� �� ��� ��� ��� ��� ��� ��� ��� ���� � �� � � � � � � � �� �� ��� ��� ��� ��� ��� ��� ��� ���� � �� ��� ��� ��� ��� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� � � MAXIMUM ESR (Ω AT 120Hz AND 20oC) ��� �µ�� ��� ���� ���� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ���� ���� ������� ������� ����� �� � � � � � � � � � � � ���� ���� ���� ���� ���� ���� ���� �� � � � � � � � � ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� �� � � � � � � � ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� � �� � � � � � � � ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� � �� ���� ��� ��� ��� ��� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� � � ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 55 Miniature Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) ��� �µ�� ���� ��� ���� ���� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ������� ������� ����� �� � � � � � � � � � � � � � �� ��� � �� � � ���� �� � ���� �� � �� ���� � �� �� � �� �� � � � � � � � � � � �� � � �� � � �� ��� � �� � � ���� �� � ���� �� � �� �� � �� ���� � �� �� � �� �� � � � � � � � � � �� � � �� � � �� ��� � �� ��� � �� � � ���� �� � �� �� � �� ���� � �� �� � �� � �� � � � � � � � � � �� � � �� ��� � �� ��� � �� � � ���� �� � ���� �� � �� ���� � �� ���� � �� �� � �� � �� � � �� � � �� � � �� � � �� � � �� � � �� � � �� � � �� � � �� ��� � ���� � � ���� � � ���� �� � �� ���� � �� ���� � �� �� � �� � � NLE-L Series LEAD SPACING AND DIAMETER (mm) Case Dia. (D∅) Leads Dia. (d∅) Lead Spacing (F) Dim. α 5 0.5 2.0 0.5 6.3 0.5 2.5 0.5 8 0.6 3.5 0.5 10 0.6 5.0 0.5 12.5 0.6 5.0 0.5 16 0.8 7.5 0.5 18 0.8 7.5 0.5 22 0.8 10 1.0 DIMENSIONS (mm) Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α PART NUMBER SYSTEM NLE-L 1R0 M 50V 5x11 F RoHS Compliant Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series ® 56 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com