NTE30106

NTE30106 LED − Dual Color 5mm Super Fresh Red/Super Yellow Green Features: D RoHS Compliant D Water Clear Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Dissipation, Pd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW Continuous Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), IFM Super Fresh Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Super Yellow Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mA Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V LED Junction Temperature, Tj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +100°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25°C to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to +100°C DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), TL . . . . . . . . . . +260°C Electro−Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter View Angle of Half Power Forward Voltage Super Fresh Red Super Yellow−Green Reverse Current Luminous Intensity (Note 1) Super Fresh Red Super Yellow−Green Peak Emission Wavelength Super Fresh Red Super Yellow−Green Dominate Wave Length (Note 2) Super Fresh Red Super Yellow−Green Symbol 2Q 1/2 VF IR IV Test Conditions IF = 20mA IF = 20mA VR = 5V IF = 20mA Min − − − − 700 400 − − − − Typ 20 2.00 2.20 − 1500 800 635 575 626 572 Max − 2.50 2.50 10 − − − − − − Unit deg V V μA mcd mcd nm nm nm nm λp IF = 20mA λd(HUE) ( ) IF = 20mA Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%. Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device. 0.22 (5.75) 0.41 (10.5) 0.34 (8.7) 0.02 (0.7) Max 0.94 (24.0) Min 0.01 (0.5) 0.03 (1.0) MIn 0.07 (2.0) MIn 0.10 (2.54) 1. Red + 2. Common Lead − 3. Green +