NTE40106B

NTE40106B & NTE40106BT Integrated Circuit CMOS, Hex Schmitt Trigger Description: The NTE40106B (14−Lead DIP) and NTE40106BT (SOIC−14) consist of six Schmitt Trigger circuits. Each circuit functions as an inverter with Schmitt Trigger action on the input. The trigger switches different points for positive−going and negative−going signals. The difference between the positive−going voltage (VP) and the negative−going voltage (VN) is defined as hysteresis voltage (VH). Features: D Schmitt−Trigger with No External Components D Hysteresis Voltage (Typ): 0.9V at VDD = 5V, 2.3V at VDD = 10V, 3.5V at VDD = 15V D Noise Immunity Greater Than 50% D No Limit on Input Rise and Fall Times D Standardized, Symmetrical Output Characteristics D Maximum Input Current of 1μA at 18V over Full Package Temperature Range: 100nA at 18V and +25°C D Low VDD to VSS Current during Slow Input Ramp D 5V, 10V, and 15V Parametric Ratings Applications: D Wave and Pulse Shapers D High−Noise−Environment Systems D Monostable Multivibrators D Astable Multivibrators Absolute Maximum Ratings: DC Supply Voltage (Voltages Referenced to VSS), VDD . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to +20V Input Voltage (All Inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VDD+0.5V DC Input Current (Any One Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10mA Power Dissipation (Per Package), PD For TA = −55° to +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW For TA = +100° to +125°C . . . . . . . . . . . . . . . . . . . . . . Derate Linearly at 12mW/°C to 200mW Device Dissipation (Per Output Transistor) For TA = Full package Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55° to +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +150°C Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +265°C Recommended Operating Conditions: DC Supply Voltage (For TA = Full Package Temperature Range) . . . . . . . . . . . . . . . . . . . . . 3 to 18V Static Electrical Characteristics: Characteristic Conditions Limits at Indicated Temperature (5C) VO (V) VIN (V) VDD (V) −555C −405C +855C − 0,5 5 1 1 30 − 0,10 10 2 2 − 0,15 15 4 − 0,20 20 − − − Units +255C +1255C Min. Typ. Max. 30 − 0.02 1 μA 60 60 − 0.02 2 μA 4 120 120 − 0.02 4 μA 20 20 600 600 − 0.04 20 μA 5 2.2 2.2 2.2 2.2 2.2 2.9 − V − 10 4.6 4.6 4.6 4.6 4.6 5.9 − V − − 15 6.8 6.8 6.8 6.8 6.8 8.8 − V − − 5 3.6 3.6 3.6 3.6 − 2.9 3.6 V − − 10 7.1 7.1 7.1 7.1 − 5.9 7.1 V − − 15 10.8 10.8 10.8 10.8 − 8.8 10.8 V − − 5 0.9 0.9 0.9 0.9 0.9 1.9 − V − − 10 2.5 2.5 2.5 2.5 2.5 3.9 − V − − 15 4.0 4.0 4.0 4.0 4.0 5.8 − V − − 5 2.8 2.8 2.8 2.8 − 1.9 2.8 V − − 10 5.2 5.2 5.2 5.2 − 3.9 5.2 V − − 15 7.4 7.4 7.4 7.4 − 5.8 7.4 V − − 5 0.3 0.3 0.3 0.3 0.3 0.9 − V − − 10 1.2 1.2 1.2 1.2 1.2 2.3 − V − − 15 1.6 1.6 1.6 1.6 1.6 3.5 − V − − 5 1.6 1.6 1.6 1.6 − 0.9 1.6 V − − 10 3.4 3.4 3.4 3.4 − 2.3 3.4 V − − 15 5.0 5.0 5.0 5.0 − 3.5 5.0 V Output Low (Sink) Current IOL Min. 0.4 0,5 5 0.64 0.61 0.42 0.36 0.51 1.0 − mA 0.5 0,10 10 1.6 1.5 1.1 0.9 1.3 2.6 − mA 1.5 0,15 15 4.2 4.0 2.8 2.4 3.4 6.8 − mA Output High (Source) Current IOH Min. 4.6 0,5 5 −0.64 −0.61 −0.42 −0.36 −0.51 −1.0 − mA 2.5 0.5 5 −2.0 −1.8 −1.3 −1.15 −1.6 −3.2 − mA 9.5 0,10 10 −1.6 −1.5 −1.1 −0.9 −1.3 −2.6 − mA 13.5 0,15 15 −4.2 −4.0 −2.8 −2.4 −3.4 −6.8 − mA Output Voltage Low−Level VOL Max. − 5 5 0.05 − 0 0.05 V − 10 10 0.05 − 0 0.05 V − 15 15 0.05 − 0 0.05 V Output Voltage High−Level VOH Min. − 5 5 4.95 4.95 5 − V − 10 10 9.95 9.95 10 − V − 15 15 14.95 14.95 15 − V Input Current, IIN Max. − 0,18 18 − ±10−5 ±0.1 μA Quiescent Device Current, IDD Max Positive Trigger Threshold Voltage, VP Min. VP Max. Negative Trigger Threshold Voltage, VN Min. VN Max. HysteresisVoltage, VH Min. VH Max. ±0.1 ±0.1 ±1.0 ±1.0 Dynamic Electrical Characteristics: Parameter (TA = +25°C, CL = 50pF, RL = 200kΩ, tr and tf = 20ns unless otherwise specified) Symbol Test Conditions Min Typ Max Unit − 140 280 ns VDD = 10V − 70 140 ns VDD = 15V − 60 120 ns − 100 200 ns VDD = 10V − 50 100 ns VDD = 15V − 40 80 ns Any Input − 5.0 7.5 pF tPHL or tPLH VDD = 5V Propagation Delay Time from Transition Time tTHL or tTLH VDD = 5V Input Capacitance CIN Functional Diagram A B C D E F 1 2 3 4 5 6 9 8 11 10 13 12 G=A H=B I=C J=D K=E L=F VDD = Pin14 VSS = Pin7 Pin Connection Diagram A 1 14 VDD G=A 2 B 3 13 F 12 L = F H=B 4 11 E C 5 10 K = E I=C 6 VSS 7 9 D 8 J=D NTE40106B 14 8 1 7 .300 (7.62) .600 (15.24) .200 (5.08) Max .100 (2.45) .099 (2.5) Min .785 (19.95) Max NTE40106BT .340 (8.64) .050 (1.27) 14 8 1 7 .198 (5.03) .154 (3.91) .236 (5.99) 016 (.406) 061 (1.53) .006 (.152) NOTE: Pin1 on Beveled Edge