NTE962

NTE962 Integrated Circuit 3–Terminal Positive Voltage Regulator, 6V The NTE962 fixed–voltage regulator is a monolithic integrated circuit in a TO220 type package designed for use in a wide variety of applications including local, on–card regulation. This regulator employs internal current limiting, thermal shutdown, and safe–area compensation. With adequate heatsinking it can deliver output currents in excess of 1.0 ampere. Although designed primarily as a fixed voltage regulator, this device can be used with external components to obtain adjustable voltages and currents. Features: D Output Current in Excess of 1.0 Ampere D No External Components Reguired D Internal Thermal Overload Protection D Internal Short–Circuit Current Limiting D Output Transistor Safe–Area Compensation Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Input Voltage, Vin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Vdc Power Dissipation (TA = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited Derate above +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.4mW/°C Power Dissipation (TC = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited Derate above +75°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mW/°C Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C/W Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5°C/W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Storage Junction Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C Electrical Characteristics: (Vin = 11V, IO = 500mA, TJ = 0° to +125°C unless otherwise specified) Parameter Output Voltage Line Regulation Load Regulation Symbol VO Regline Regload Test Conditions Min Typ Max Unit TJ = +25°C 5.75 6.0 6.25 V 5mA ≤ IO ≤ 1A, PO ≤ 15W, 8V ≤ Vin ≤ 21V 5.7 6.0 6.3 V 8V ≤ Vin ≤ 25V – 9 120 mV 9V ≤ Vin ≤ 13V – 3 60 mV 5mA ≤ IO ≤ 1.5A – 43 120 mV 250mA ≤ IO ≤ 750mA – 16 60 mV TJ = +25°C, Note 1 TJ = +25°C, Note 1 Note 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. Electrical Characteristics (Cont’d): (Vin = 11V, IO = 500mA, TJ = 0° to +125°C unless otherwise specified) Parameter Symbol Quiescent Current IB ∆IB Quiescent Current Change Ripple Rejection RR Dropout Voltage Vin – VO Test Conditions Min Typ Max Unit TJ = +25°C – 4.3 8.0 mA 8V ≤ Vin ≤ 25V – – 1.3 mA 5mA ≤ IO ≤ 1A – – 0.5 mA 9V ≤ Vin ≤ 19V, f = 120Hz – 65 – dB TJ = +25°C, IO = 1A – 2 – V Output Noise Voltage Vn TA = +25°C, 10Hz ≤ f ≤ 100kHz – 10 – µV/VO Output Resistance rO f = 1kHz – 17 – mΩ Short–Circuit Current Limit Isc TA = +25°C, Vin = 35V – 0.2 – A TJ = +25°C – 2.2 – A – –0.8 – mV/°C Peak Output Current Imax Average Temperature Coefficient of Output Voltage TCVO .420 (10.67) Max .110 (2.79) GND .147 (3.75) Dia Max .500 (12.7) Max .250 (6.35) Max .500 (12.7) Min .070 (1.78) Max VIN .100 (2.54) VOUT GND