TD2.2M25

SOLID TANTALUM TD (Resin Dipped Radial) SERIES SOLID TANTALUM CAPACITANCE RANGE: (Number denotes case size) The TD series is a range of resin dipped tantalum capacitors designed for entertainment, commercial, and industrial equipment. They have sintered anodes and solid electrolyte. The epoxy resin housing is flame retardent with a limiting oxygen index in excess of 30 (ASTM−D−2863). Rated Voltage (WV) 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 PERFORMANCE SPECIFICATIONS Operating Temperature Range: −55°C to +85°C (−67°F to +185°F) Capacitance Tolerance (M): ±20% measured at +20°C (+68°F), 120HZ Dissipation Factor: measured at +20°C (+68°F),120HZ 2.2 − 6.8 10 − 68 100 − 680 ≤ 0.04 ≤ 0.06 ≤ 0.08 ≤ 0.10 Surge Voltage: DC Rated Voltage Surge Voltage 6.3 10 16 20 25 35 50 8 13 20 26 33 46 65 MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL−STD 202, Method 208 Marking: Consists of capacitance, DC voltage, and polarity. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. 2 Min 10 Min 16 20 25 35 50 8 13 20 26 33 46 65 1 1 1 1 1 1 1 2 3 4 5 6 7 9 10 12 14 1 1 1 2 2 2 4 5 5 7 8 8 9 10 13 Surge Voltage (V) Capacitance Range: 0.1µf to 680µf Tolerance: ±20% Voltage Range: 6.3V to 50V 0.1 − 1.5 10 Cap (µf) RATINGS Capacitance Range µf 6.3 1 1 2 3 4 5 6 7 8 9 11 12 14 15 15 1 1 2 3 4 5 6 7 8 9 11 13 14 15 1 1 2 3 4 5 6 7 8 9 11 13 13 1 1 2 3 4 5 6 7 8 10 11 13 15 15 1 1 2 3 4 5 6 7 9 10 12 13 TD Series Dimensions: mm Diameter (D Ø) x Length (L) Case Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Diameter (D Ø) 4.50 4.50 5.00 5.00 5.50 6.00 6.50 7.00 8.00 8.50 9.00 9.00 9.00 10.00 10.00 Length (L) 8.50 9.00 10.00 10.50 10.50 11.50 11.50 12.00 13.00 14.00 14.00 14.50 16.00 17.00 18.50 Lead Wire (d) 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.50 0.50 0.50 0.50 0.50 0.50 0.50 Spacing (S) 2.54 ±0.51 5.08 ±0.51 ORDERING INFORMATION TD D Ø Max 47 M 50 Series d L Max Capacitance Tolerance S Voltage NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 43