IEEE® 802.15.4 and ZigBee™ Development Kit Fact Sheet
Wireless Connectivity with Flexis™ Microcontroller
Overview
Designers of extended wireless networks
have consistently expressed a need for a
microcontroller with more memory, 128Kb of
Flash memory. That solution is now available
in the 1320x-QE128-EVB, an evaluation
board for developing IEEE® 802.15.4 software
applications ranging from simple proprietary
point-to-point connectivity to complete
ZigBee mesh networking on the Freescale
HCS08QE microcontroller platform. The
Freescale QE MCU family is unique in that the
user can use an 8-bit CPU or a 32-bit CPU in
a pin-compatible package and also retain the
same peripheral and IO set.
The 1320x-QE128EVB evaluation board is
based on the Freescale MC1320x transceiver
and MC9S08QE128 microcontroller unit
(which is supplied as a daughter card). The
1320x-QE128EVB provides a platform to
evaluate the MC1320x and MC9S08QE
Markets and Applications
Energy management and efficiency
• Automated energy/utility metering
• Demand response
• Load control
devices, develop software, and applications,
Home/Building/Industrial automation,
and demonstrate the IEEE 802.15.4 and
monitoring, and control
ZigBee networking capabilities. The evaluation
• Lighting
board is supported by Freescale’s BeeKit
• Heating
software design environment for IEEE
• Cooling
802.15.4 and ZigBee applications.
• Consumer electronics control
• Security
The 1320x-QE128-EVB
• Process management
• Asset management
• Critical equipment monitor
• Patient monitoring
• Energy management
Features
Software Features
CodeWarrior Development Studio for
The 1320x-QE128EVB provides the
following features:
The 1320X-QE128-DSK and DSK-BDM
• MC9S08QE128 MCU daughter card—
supports the S08-based version of
the QE128
BeeKit, wireless connectivity design tool,
• Full IEEE 802.15.4 compliant wireless
node and is ZigBee capable with
Freescale’s BeeStack software stack
• Freescale MC13202 transceiver in RF
single-port mode
• Freescale MC9S08QE128
microcontroller unit
are supported by Freescale’s well known
and CodeWarrior®, microcontroller design
tool, integrated design environments (IDE).
The BeeKit provides a graphical user’s
interface (GUI) which allows straight forward
wireless transceiver and network set-up. The
BeeKit is a comprehensive wireless network
development tool, making it easier than ever
to create and update wireless networking
Microcontrollers is a single, integrated tool
suite to get customers on the fast track to
application development with Freescale’s
QE128 microcontroller. By combining
state-of-the art debugging technology with
the simplicity of a robust development
environment, CodeWarrior Development
Studio takes source-level debugging and
embedded application design to a new level.
The CodeWarrior software development
environment features the ability to:
• Create a working project in as few as six
• USB interface that is bus-powered and
full-speed compatible to USB 2.0 and
1.1 specifications
implementations. The BeeKit solution
• Alternative RS-232/UART (DB-9) serial
communications port
quickly developing the wireless network, the
microcontroller compiler and embedded
engineer may focus their efforts on application
libraries to increase code density
• User interfaces switches and LEDs
development. BeeKit is a complimentary tool
• Supports 2x16 character LCD
to CodeWarrior.
• External 1Mbit serial I2C EEPROM
The BeeKit software development
• Audio resonator
• Standard QE128 BDM development port
• BeeKit software development environment
• Multiple system clock options
• MCU source derived from transceiver
CLK0 (MC13202 transceiver requires 16
MHz crystal)
• Optional 32.768 kHz crystal oscillator for
accurate real-time delays and lower
power modes
• Power management circuit with on-board
regulation for multiple power sources
• Can be powered from USB interface, DC
power jack or two AA batteries
• ON/OFF power switch
• Power-on green LED
• MCU and transceiver RESET via ON/OFF
switch (MCU does not support use of a
hardware reset pin when used with the
MC13202 transceiver)
provides designers a tool to reduce their RF
investment in time and design resources. By
• Build systems with the optimized
and performance
• Develop assembler for the
QE128 microcontroller
environment features the ability to:
• Utilize a graphical, source-level debugger
• Create, modify, save and update wireless
• Simulate instruction sets for the architecture
network solutions
• Program flash through an integrated
• Develop using a wizard and solution
explorer for quick and easy configuration
of parameters
flash programmer
• Create new flash programming algorithms
for external memory devices using the
• Generate the appropriate workspace files
to be imported into CodeWarrior with the
comprehensive code base of networking
Flash Tool Kit
• Develop CPU and peripheral
initialization code
libraries, application templates, and
sample applications
• Prepare .xml files for use with CodeWarrior
• Support new code bases and functionality
with this exceptional and scalable
development tool
• Develop with the Simple MAC (SMAC) and
IEEE® 802.15.4 MAC code bases with the
unlimited use, complementary
BeeKit license
• 16-pin and 10-in user headers for
selected General Purpose Input Output
signals (GPIO) and data interfaces
• Access at no charge a 90-day evaluation of
• All components meet RoHS and
• Purchase a BeeStack ZigBee code base for
WEE requirements
mouse clicks with the Project Wizard
BeeStack® fully compliant ZigBee stack.
full ZigBee stack development as a single
user license or a floating license.
Learn More:
Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc. in
the U.S. and other countries. All other product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2008
Document Number: 1320XQE128DKSFS
REV 0
For more information about ZigBee products,
please visit www.freescale.com/zigbee.
很抱歉,暂时无法提供与“1320X-QE-DSK-BDM”相匹配的价格&库存,您可以联系我们找货
免费人工找货