1900MHZ-AMP-EVK

Low Noise Amplifier MBC13720 First SiGe:C Standard Product Overview Freescale Semiconductor’s MBC13720 low noise amplifier (LNA) with an on-chip bypass switch is Freescale's first SiGe:C Features > Uses SiGe:C module of advanced RF BiCMOS process for superior performance in a cost-effective monolithic device standard product. This device uses the > Integrated bypass switch SiGe:C module of Freescale's advanced > Low noise figure 0.35 micron RF BiCMOS process. The on-chip bypass switch improves the > High input IP3 dynamic range of the receiver with low > Receive/enable pins insertion loss. In addition to providing > Selectable IP3 modes improved performance, the bypass switch > Simplified off-chip matching helps conserve board space and reduce system and manufacturing costs. The device also provides selectable IP3 > Packaged in ultra-small SOT-363 surface mount package settings and a standby mode to turn the > Usable frequency range of 400 MHz to 2400 MHz device completely off. Input and output > Low standby current Supply voltage from 2.5V to 3.0V The MBC13720 SiGe:C low noise amplifier modes, low noise figure, selectable gain maximum design flexibility. with bypass switch can operate over a > Lead-free frequency range of 400 MHz to 2400 MHz. Applications include: Key Parameters Low IP3 Mode High IP3 Mode Bypass >RF Gain 900 MHz 1900 MHz 2400 MHz 19 dB 13 dB 11.5 dB 20 dB 14.5 dB 12 dB -2.9 dB -2.5 dB -2.8 dB >Current Consumption 5.0 mA 9.0 mA 10 µA >Noise Figure 900 MHz 1900 MHz 2400 MHz 1.30 dB 1.38 dB 1.55 dB 10 dBm 10 dBm 13 dBm 29 dBm 29 dBm 25 dBm >Input IP3 900 MHz 1900 MHz 2400 MHz -3.0 dBm 4.0 dBm 6.0 dBm >Input/Output Return Loss 10 dB 10 dB 12 dB >Reverse Isolation 25 dB 20 dB 18 dB > PCS 1900 MHz cellular telephones > 900 MHz and 2400 MHz industrial, scientific and medical (ISM) band designs Evaluation Kit An evaluation kit is available in a low- (900 MHz) or high(1900 MHz) frequency version. Each kit contains both the MBC13720 and MBC13916 low noise amplifiers. Visit www.freescale.com to order 900MHZ-AMP-EVK or 1900MHZ-AMP-EVK. Literature A complete data sheet containing full specifications, characteristic curves and application circuit configuration is available at Freescale’s Technical Benefits to You > Lowers system manufacturing costs due to integrated, on-chip bypass switch and gain control circuitry A Solution for these Questions > Do you want to reduce part count and lower your system and manufacturing costs by using an LNA with on-chip bypass switch? Information Center. > Improves dynamic range of the receiver with integrated bypass switch > Do you want to improve the dynamic range and sensitivity of your receiver? Device Information > Provides improved receiver sensitivity through low noise figure > Would you like to improve the flexibility of your design by customizing the input/output matching to optimize gain or noise figure? MBC13720NT1 > Does your design require that the battery size be reduced with a supply voltage as low as 2.7V and low power consumption? TA = -30°C to +85°C > Do you need to improve the IP3 performance of your design? SOT-363* > Smaller battery for portable applications with 2.7V operation and low current consumption of less than 20 microamps in standby mode > Maximizes design flexibility and efficiency with off-chip matching to optimize gain or noise figure > Provides higher circuit and system density with ultra-small SOT-363 surface mount package > Do you want to reduce the PC board area for your portable RF product? > Improved reliability due to lower power dissipation Learn More: For more information about Freescale products, please visit www.freescale.com. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006 Document Number: MBC13720FACT REV 2 www.freescale.com Device Operating Case Temperature Range Package in Tape and Reel *(3,000 units per 8 mm, 7 inch reel)