1PS301

DISCRETE SEMICONDUCTORS DATA SHEET ook, halfpage M3D187 1PS301 High-speed double diode Product data sheet Supersedes data of 1996 Oct 04 1999 May 06 NXP Semiconductors Product data sheet High-speed double diode FEATURES • Very small plastic SMD package • High switching speed: max. 4 ns • Continuous reverse voltage: max. 80 V • Repetitive peak reverse voltage: max. 85 V • Repetitive peak forward current: max. 500 mA. APPLICATIONS • High-speed switching in e.g. surface mounted circuits. 3 Top view Marking code: B3. MAM084 1PS301 PINNING PIN 1 2 3 DESCRIPTION anode (a1) anode (a2) common cathode DESCRIPTION The 1PS301 consists of two high-speed switching diodes with common cathodes, fabricated in planar technology, and encapsulated in the very small rectangular plastic SMD SC70-3 package. 2 1 2 1 3 Fig.1 Simplified outline (SOT323; SC70-3) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL Per diode VRRM VR IF IFRM IFSM repetitive peak reverse voltage continuous reverse voltage continuous forward current repetitive peak forward current non-repetitive peak forward current square wave; Tj = 25 °C prior to surge t = 1 μs t=1s Ptot Tstg Tj Note 1. Device mounted on an FR4 printed-circuit board. total power dissipation storage temperature junction temperature Tamb = 25 °C; note 1 − − − −65 − 4 0.5 300 +150 150 A A mW °C °C single diode loaded; note 1; see Fig.2 double diode loaded; note 1; see Fig.2 − − − − − 85 80 250 160 500 V V mA mA mA PARAMETER CONDITIONS MIN. MAX. UNIT 1999 May 06 2 NXP Semiconductors Product data sheet High-speed double diode ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL Per diode VF forward voltage see Fig.3 I F = 1 mA IF = 10 mA IF = 50 mA IF = 100 mA IR reverse current see Fig.4 VR = 2 5 V VR = 8 0 V VR = 25 V; Tj = 150 °C VR = 80 V; Tj = 150 °C Cd trr diode capacitance reverse recovery time f = 1 MHz; VR = 0; see Fig.5 when switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA; see Fig.6 when switched from IF = 10 mA; tr = 20 ns; see Fig.7 − − − − − − 30 0.5 30 100 1.5 4 610 740 − − − − 1.0 1.2 PARAMETER CONDITIONS TYP. 1PS301 MAX. UNIT mV mV V V nA μA μA μA pF ns Vfr forward recovery voltage − 1.75 V THERMAL CHARACTERISTICS SYMBOL Rth j-tp Rth j-a Note 1. Device mounted on an FR4 printed-circuit board. PARAMETER thermal resistance from junction to tie-point thermal resistance from junction to ambient note 1 CONDITIONS VALUE 200 415 UNIT K/W K/W 1999 May 06 3 NXP Semiconductors Product data sheet High-speed double diode GRAPHICAL DATA 1PS301 handbook, halfpage 300 MBG444 handbook, halfpage 300 MBG382 IF (mA) 200 (1) IF (mA) (1) (2) (3) 200 (2) 100 100 0 0 100 Tamb (oC) 200 0 0 1 VF (V) 2 Device mounted on an FR4 printed-circuit board. (1) Single diode loaded. (2) Double diode loaded. (1) Tj = 150 °C; typical values. (2) Tj = 25 °C; typical values. (3) Tj = 25 °C; maximum values. Fig.2 Maximum permissible continuous forward current as a function of ambient temperature. Fig.3 Forward current as a function of forward voltage. 102 handbook, halfpage IR (μA) 10 MBG380 handbook, halfpage 0.8 MBG446 Cd (pF) 0.6 1 (1) (2) (3) 0.4 10 1 0.2 10 2 0 100 Tj (oC) 200 0 0 4 8 12 VR (V) 16 (1) VR = 80 V; maximum values. (2) VR = 80 V; typical values. (3) VR = 25 V; typical values. f = 1 MHz; Tj = 25 °C. Fig.4 Reverse current as a function of junction temperature. Fig.5 Diode capacitance as a function of reverse voltage; typical values. 1999 May 06 4 NXP Semiconductors Product data sheet High-speed double diode 1PS301 handbook, full pagewidth tr tp t D.U.T. R = 50 Ω S V = VR IF x R S 10% SAMPLING OSCILLOSCOPE IF t rr t IF R i = 50 Ω VR 90% (1) MGA881 input signal output signal (1) IR = 1 mA. Fig.6 Reverse recovery voltage test circuit and waveforms. I 1 kΩ 450 Ω I 90% V R S = 50 Ω D.U.T. OSCILLOSCOPE R i = 50 Ω 10% MGA882 V fr t tr tp t input signal output signal Fig.7 Forward recovery voltage test circuit and waveforms. 1999 May 06 5 NXP Semiconductors Product data sheet High-speed double diode PACKAGE OUTLINE Plastic surface mounted package; 3 leads 1PS301 SOT323 D B E A X y HE vMA 3 Q A A1 c 1 e1 e bp 2 wM B Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 OUTLINE VERSION SOT323 REFERENCES IEC JEDEC EIAJ SC-70 EUROPEAN PROJECTION ISSUE DATE 97-02-28 1999 May 06 6 NXP Semiconductors Product data sheet High-speed double diode DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION 1PS301 This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 1999 May 06 7 NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 115002/00/04/pp8 Date of release: 1999 May 06 Document order number: 9397 750 05897