2PA1774RM

DISCRETE SEMICONDUCTORS DATA SHEET M3D883 BOTTOM VIEW 2PA1774M series PNP general purpose transistor Product data sheet 2004 Feb 19 NXP Semiconductors Product data sheet PNP general purpose transistor FEATURES • Leadless ultra small plastic package (1 mm × 0.6 mm × 0.5 mm) • Board space 1.3 mm × 0.9 mm • Power dissipation comparable to SOT23. APPLICATIONS • General purpose small signal DC • Low and medium frequency AC applications • Mobile communications, digital (still) cameras, PDAs, PCMCIA cards. DESCRIPTION PNP general purpose transistor in a SOT883 leadless ultra small plastic package. NPN complement: 2PC4617M series. MARKING TYPE NUMBER 2PA1774QM 2PA1774RM 2PA1774SM ORDERING INFORMATION TYPE NUMBER 2PA1774QM 2PA1774RM 2PA1774SM − − − PACKAGE NAME DESCRIPTION MARKING CODE PB PA PC 2PA1774M series QUICK REFERENCE DATA SYMBOL VCEO IC ICM PINNING PIN 1 2 3 base emitter collector DESCRIPTION PARAMETER collector-emitter voltage collector current (DC) peak collector current MAX. −40 −100 −200 UNIT V mA mA handbook, halfpage 3 3 1 2 2 1 Bottom view MAM469 Fig.1 Simplified outline (SOT883) and symbol. VERSION SOT883 leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm 2004 Feb 19 2 NXP Semiconductors Product data sheet PNP general purpose transistor LIMITING VALUES In accordance with the Absolute Maximum System (IEC 60134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation Tamb ≤ 25 °C note 1 note 2 Tstg Tj Tamb Notes storage temperature junction temperature operating ambient temperature − − −65 − −65 CONDITIONS open emitter open base open collector − − − − − − 2PA1774M series MIN. MAX. −50 −40 −5 −100 −200 −100 250 430 +150 150 +150 V V V UNIT mA mA mA mW mW °C °C °C 1. Refer to SOT883 standard mounting conditions (footprint), FR4 with 60 μm copper strip line. 2. Device mounted on a FR4 printed-circuit board, single-sided copper, mounting pad for collector 1 cm2. THERMAL CHARACTERISTICS SYMBOL Rth(j-a) PARAMETER thermal resistance from junction to ambient CONDITIONS in free air note 1 note 2 Notes 1. Refer to SOT883 standard mounting conditions (footprint), FR4 with 60 μm copper strip line. 2. Device mounted on a FR4 printed-circuit board, single-sided copper, mounting pad for collector 1 cm2. 500 290 K/W K/W VALUE UNIT 2004 Feb 19 3 NXP Semiconductors Product data sheet PNP general purpose transistor CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE PARAMETER collector-base cut-off current emitter-base cut-off current DC current gain 2PA1774QM 2PA1774RM 2PA1774SM VCEsat Cc fT Note 1. Pulse test: tp ≤ 300 μs; δ ≤ 0.02. collector-emitter saturation voltage collector capacitance transition frequency IC = −50 mA; IB = −5 mA; note 1 IE = ie = 0; VCB = −12 V; f = 1 MHz VCE = −12 V; IC = −2 mA; f = 100 MHz CONDITIONS VCB = −30 V; IE = 0 VCB = −30 V; IE = 0; Tj = 150 °C VEB = −4 V; IC = 0 VCE = −6 V; IC = −1 mA − − − 2PA1774M series MIN. MAX. −100 −5 −100 270 390 560 −200 2.2 − UNIT nA μA nA 120 180 270 − − 100 mV pF MHz 103 handbook, halfpage (1) MDB663 handbook, halfpage −1200 MDB664 hFE VBE (mV) −1000 (2) (1) (3) −800 102 −600 (2) −400 (3) 10 −10−1 −1 −10 −102 −103 IC (mA) −200 −10−1 −1 −10 −102 −103 IC (mA) VCE = −6 V. (1) Tamb = 150 °C. (2) Tamb = 25 °C. (3) Tamb = −55 °C. VCE = −6 V. (1) Tamb = −55 °C. (2) Tamb = 25 °C. (3) Tamb = 150 °C. Fig.3 Fig.2 DC current gain; typical values. Base-emitter voltage as a function of collector current; typical values. 2004 Feb 19 4 NXP Semiconductors Product data sheet PNP general purpose transistor 2PA1774M series −103 handbook, halfpage MDB665 handbook, halfpage −1200 MDB666 VBEsat (mV) VCEsat (mV) −1000 (1) −800 −102 −600 (1) (2) (3) (3) (2) −400 −10 −10−1 IC/IB = 10. (1) Tamb = 150 °C. (2) Tamb = 25 °C. (3) Tamb = −55 °C. −1 −10 −102 −103 IC (mA) −200 −10−1 IC/IB = 10. (1) Tamb = −55 °C. (2) Tamb = 25 °C. (3) Tamb = 150 °C. −1 −10 2 IC (mA) −10 Fig.4 Collector-emitter saturation voltage as a function of collector current; typical values. Fig.5 Base-emitter saturation voltage as a function of collector current; typical values. handbook, halfpage (1) IC (2) (A) (3) −0.16 (4) (5) −0.2 MDB667 103 RCEsat (Ω) MDB668 (6) (7) 102 −0.12 (8) (9) −0.08 10 (10) (1) (2) −0.04 (3) 0 0 −2 −4 −6 −8 −10 VCE (V) (9) IB = −0.54 mA. (10) IB = −0.27 mA. 1 −10−1 IC/IB = 10. (1) Tamb = 150 °C. (2) Tamb = 25 °C. (3) Tamb = −55 °C. −1 −10 −102 −103 IC (mA) (1) (2) (3) (4) IB = −2.7 mA. IB = −2.43 mA. IB = −2.16 mA. IB = −1.89 mA. (5) IB = −1.62 mA. (6) IB = −1.35 mA. (7) IB = −1.08 mA. (8) IB = −0.81 mA. Fig.7 Fig.6 Collector current as a function of collector-emitter voltage; typical values. Collector-emitter equivalent on-resistance as a function of collector current; typical values. 2004 Feb 19 5 NXP Semiconductors Product data sheet PNP general purpose transistor PACKAGE OUTLINE Leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm 2PA1774M series SOT883 L 2 b e L1 3 b1 1 e1 A A1 E D 0 0.5 scale 1 mm DIMENSIONS (mm are the original dimensions) UNIT mm A (1) 0.50 0.46 A1 max. 0.03 b 0.20 0.12 b1 0.55 0.47 D 0.62 0.55 E 1.02 0.95 e 0.35 e1 0.65 L 0.30 0.22 L1 0.30 0.22 Note 1. Including plating thickness OUTLINE VERSION SOT883 REFERENCES IEC JEDEC JEITA SC-101 EUROPEAN PROJECTION ISSUE DATE 03-02-05 03-04-03 2004 Feb 19 6 NXP Semiconductors Product data sheet PNP general purpose transistor DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes PRODUCT STATUS(2) Development Qualification Production DEFINITION 2PA1774M series This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 2004 Feb 19 7 NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R75/01/pp8 Date of release: 2004 Feb 19 Document order number: 9397 750 11698