74ABT823DB,112

74ABT823 9-bit D-type flip-flop with reset and enable; 3-state Rev. 4 — 7 November 2011 Product data sheet 1. General description The 74ABT823 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT823 is a 9-bit wide buffered register with clock enable input (CE) and master reset input (MR) which are ideal for parity bus interfacing in systems using many microprocessors. The 74ABT823 is designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider data and address paths of buses carrying parity. The register is fully edge-triggered. The state of each D input, one set-up time before the LOW-to-HIGH clock transition, is transferred to the corresponding output Q of the flip-flop. 2. Features and benefits  High-speed parallel registers with positive edge-triggered D-type flip-flops  Ideal where high speed, light loading, or increased fan-in are required with MOS microprocessors  Output capability: +64 mA and 32 mA  Power-on 3-state  Power-on reset  Latch-up protection exceeds 500 mA per JESD78B class II level A  ESD protection:  HBM JESD22-A114F exceeds 2000 V  MM JESD22-A115-A exceeds 200 V 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74ABT823D 40 C to +85 C SO24 plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 74ABT823DB 40 C to +85 C SSOP24 plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1 74ABT823PW 40 C to +85 C TSSOP24 plastic thin shrink small outline package; 24 leads; body width 4.4 mm SOT355-1 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 4. Functional diagram 1 11 2 3 4 5 6 7 8 9 10 MR D0 1 OE Q0 D1 Q1 D2 Q2 D3 Q3 D4 Q4 D5 Q5 D6 Q6 D7 Q7 D8 CP 13 Q8 CE 23 EN 11 R 14 G1 13 1C2 22 21 2 20 23 2D 19 3 22 18 4 21 17 5 20 6 19 7 18 8 17 9 16 10 15 16 15 14 001aaa847 001aaa848 Fig 1. Logic symbol 74ABT823 Product data sheet Fig 2. IEC logic symbol All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 2 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state D0 D1 D2 D3 D4 MR CE D R Q R D Q CP CP FF0 R D Q CP FF1 R D Q D CP FF2 R Q CP FF3 FF4 CP OE Q0 D5 Q1 D6 D R Q D7 D CP Q2 R Q FF5 Q5 R Q D CP FF6 Q4 D8 D CP Q3 Q CP FF7 Q6 R FF8 Q7 Q8 001aac444 Fig 3. Logic diagram 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 3 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 5. Pinning information 5.1 Pinning 74ABT823 OE 1 24 VCC D0 2 23 Q0 D1 3 22 Q1 D2 4 21 Q2 D3 5 20 Q3 D4 6 19 Q4 D5 7 18 Q5 D6 8 17 Q6 D7 9 16 Q7 D8 10 15 Q8 MR 11 14 CE GND 12 13 CP 001aal300 Fig 4. Pin configuration 5.2 Pin description Table 2. Pin description Symbol Pin Description OE 1 output enable input (active LOW) D0, D1, D2, D3, D4, D5, D6, D7, D8 2, 3, 4, 5, 6, 7, 8, 9, 10 data input MR 11 master reset input (active LOW) GND 12 ground (0 V) CP 13 clock pulse input (active rising edge) CE 14 clock enable input (active LOW) Q8, Q7, Q6, Q5, Q4, Q3, Q3, Q2, Q1, Q0 15, 16, 17, 18, 19, 20, 21, 22, 23 VCC 74ABT823 Product data sheet 24 data output positive supply voltage All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 4 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 6. Functional description 6.1 Function table Table 3. Function table[1] Input OE Output MR CE CP Dn Operating mode Qn L L X X X L clear L H L  h H load and read data L H L  l L L H H NC X NC hold H X X X X Z high-impedance [1] H = HIGH voltage level; L = LOW voltage level; h = HIGH voltage level one set-up time prior to the LOW-to-HIGH clock transition; I = LOW voltage level one set-up time prior to the LOW-to-HIGH clock transition;  = LOW-to-HIGH clock transition; NC = no change; X = don’t care; Z = high-impedance OFF-state. 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VCC supply voltage Conditions Min Max Unit 0.5 +7.0 V 1.2 +7.0 V input voltage [1] VO output voltage output in OFF-state or HIGH-state [1] 0.5 +5.5 V IIK input clamping current VI < 0 V 18 - mA IOK output clamping current VO < 0 V 50 - mA IO output current output in LOW-state - 128 mA VI Tj junction temperature Tstg storage temperature [2] - 150 C 65 +150 C [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C. 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 5 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 8. Recommended operating conditions Table 5. Operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC Conditions Min Typ Max Unit supply voltage 4.5 - 5.5 V VI input voltage 0 - VCC V VIH HIGH-level input voltage 2.0 - - V VIL LOW-level Input voltage - - 0.8 V IOH HIGH-level output current 32 - - mA IOL LOW-level output current - - 64 mA t/V input transition rise and fall rate 0 - 5 ns/V Tamb ambient temperature 40 - +85 C in free air 9. Static characteristics Table 6. Static characteristics Symbol Parameter 25 C Conditions 40 C to +85 C Unit Min Typ Max Min Max VIK input clamping voltage VCC = 4.5 V; IIK = 18 mA 1.2 0.9 - 1.2 - V VOH HIGH-level output voltage VCC = 4.5 V; IOH = 3 mA 2.5 2.9 - 2.5 - V VCC = 5.0 V; IOH = 3 mA 3.0 3.4 - 3.0 - V VCC = 4.5 V; IOH = 32 mA 2.0 2.4 - 2.0 - V - 0.42 0.55 - 0.55 V - 0.13 0.55 - 0.55 V VI = VIL or VIH VOL LOW-level output voltage VCC = 4.5 V; IOL = 64 mA; VI = VIL or VIH VOL(pu) power-up LOW-level output voltage VCC = 5.5 V; IO = 1 mA; VI = GND or VCC II input leakage current VCC = 5.5 V; VI = VCC or GND - 0.01 1.0 - 1.0 A IOFF power-off leakage current VCC = 0 V; VI or VO  4.5 V - 5.0 100 - 100 A IO(pu/pd) power-up/power-down VCC = 2.0 V; VO = 0.5 V; output current VI = GND or VCC; OE HIGH - 5.0 50 - 50 A IOZ OFF-state output current - 5.0 50 - 50 A [1] [2] VCC = 5.5 V; VI = VIL or VIH VO = 2.7 V - 5.0 50 - 50 A - 5.0 50 - 50 A 180 50 50 180 50 mA outputs HIGH-state - 0.5 250 - 250 A outputs LOW-state - 27 34 - 34 mA outputs disabled - 0.5 250 - 250 A VO = 0.5 V ILO output leakage current HIGH-state; VO = 5.5 V; VCC = 5.5 V; VI = GND or VCC IO output current VCC = 5.5 V; VO = 2.5 V ICC supply current VCC = 5.5 V; VI = GND or VCC 74ABT823 Product data sheet [3] All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 6 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state Table 6. Static characteristics …continued Symbol Parameter 25 C Conditions 40 C to +85 C Unit Min Typ Max Min Max - 0.5 1.5 - 1.5 mA ICC additional supply current per input pin; VCC = 5.5 V; one input at 3.4 V; other inputs at VCC or GND CI input capacitance VI = 0 V or VCC - 4 - - - pF CO output capacitance outputs disabled; VO = 0 V or VCC - 7 - - - pF [4] [1] For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. [2] This parameter is valid for any VCC between 0 V and 2.1 V, with a transition time of up to 10 ms. From VCC = 2.1 V to VCC = 5 V  10 % a transition time of up to 100 s is permitted. [3] Not more than one output should be tested at a time, and the duration of the test should not exceed one second. [4] This is the increase in supply current for each input at 3.4 V. 10. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; for test circuit, see Figure 9. Symbol Parameter 25 C; VCC = 5.0 V Conditions 40 C to +85 C; Unit VCC = 5.0 V  0.5 V Min Typ Max Min Max fmax maximum frequency see Figure 5 125 200 - 125 - tPLH LOW to HIGH propagation delay CP to Qn, see Figure 5 2.1 4.3 5.9 2.1 6.8 ns tPHL HIGH to LOW propagation delay CP to Qn, see Figure 5 2.2 4.4 6.1 2.2 6.7 ns MR to Qn, see Figure 6 2.0 4.1 6.3 2.0 7.1 ns tPZH OFF-state to HIGH propagation delay OE to Qn; see Figure 8 1.0 3.0 4.5 1.0 5.3 ns tPZL OFF-state to LOW propagation delay OE to Qn; see Figure 8 2.2 4.1 5.6 2.2 6.3 ns tPHZ HIGH to OFF-state propagation delay OE to Qn; see Figure 8 2.7 4.8 6.2 2.7 6.9 ns tPLZ LOW to OFF-state propagation delay OE to Qn; see Figure 8 2.5 5.0 6.4 2.5 6.9 ns tsu(H) set-up time HIGH tsu(L) th(H) th(L) tWH set-up time LOW hold time HIGH hold time LOW pulse width HIGH 74ABT823 Product data sheet MHz Dn to CP; see Figure 7 2.1 0.5 - 2.1 - ns CE to CP; see Figure 7 +2.0 0.5 - +2.0 - ns Dn to CP; see Figure 7 2.1 0.2 - 2.1 - ns CE to CP; see Figure 7 3.3 1.5 - 3.3 - ns CP to Dn; see Figure 7 1.3 0.0 - 1.3 - ns CP to CE; see Figure 7 +1.0 1.4 - +1.0 - ns CP to Dn; see Figure 7 +1.3 0.3 - +1.3 - ns CP to CE; see Figure 7 2.0 0.7 - 2.0 - ns CP; see Figure 5 2.9 1.9 - 2.9 - ns All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 7 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state Table 7. Dynamic characteristics …continued GND = 0 V; for test circuit, see Figure 9. Symbol Parameter tWL trec pulse width LOW recovery time 25 C; VCC = 5.0 V Conditions 40 C to +85 C; Unit VCC = 5.0 V  0.5 V Min Typ Max Min Max CP; see Figure 5 3.8 2.8 - 3.8 - ns MR; see Figure 6 5.5 4.0 - 5.5 - ns MR to CP; see Figure 6 2.5 0.6 - 2.5 - ns 11. Waveforms 1 / fmax VI CP input VM GND tWH tWL tPHL tPLH VOH VM Qn output VOL 001aac445 VM = 1.5 V VOL and VOH are typical voltage output levels that occur with the output load. Fig 5. Propagation delay clock input (CP) to output (Qn), clock pulse (CP) width and maximum clock (CP) frequency VI VM MR input GND t WL t rec VI CP input VM GND t PHL VOH VM Qn output VOL 001aac446 VM = 1.5 V VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. Master reset (MR) pulse width, propagation delay master reset (MR) to output (Qn) and recovery time master reset (MR) to clock (CP) 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 8 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state VI VM CP input GND t su(H) t su(L) t h(H) t h(L) VI VM Dn, CE input GND 001aac447 VM = 1.5 V The shaded areas indicate when the input is permitted to change for predictable output performance. Fig 7. Set-up and hold times data output (Dn) to clock (CP) and clock enable input (CE) to clock (CP) VI OE input VM GND tPZL tPLZ 3.5 V VM Qn output VOL + 0.3 V VOL tPZH tPHZ VOH Qn output VM VOH − 0.3 V GND 001aac448 VM = 1.5 V VOL and VOH are typical voltage output levels that occur with the output load Fig 8. 3-state output (Qn) enable and disable times 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 9 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state VI tW 90 % 90 % negative pulse VM 0V VCC 10 % tf tr tr tf VI 90 % positive pulse 0V VEXT VM 10 % VI VM DUT RT 90 % RL VO G CL RL VM 10 % mna616 10 % tW 001aai298 a. Input pulse definition b. Test circuit Test data is given in Table 8. RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 9. Table 8. Load circuitry for switching times Test data Input Load VEXT VI fI tW tr, tf CL RL tPHL, tPLH tPZH, tPHZ tPZL, tPLZ 3.0 V 1 MHz 500 ns  2.5 ns 50 pF 500  open open 7.0 V 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 10 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 12. Package outline SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 D E A X c HE y v M A Z 13 24 Q A2 A (A 3) A1 pin 1 index θ Lp L 1 12 e detail X w M bp 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y mm 2.65 0.3 0.1 2.45 2.25 0.25 0.49 0.36 0.32 0.23 15.6 15.2 7.6 7.4 1.27 10.65 10.00 1.4 1.1 0.4 1.1 1.0 0.25 0.25 0.1 0.01 0.019 0.013 0.014 0.009 0.61 0.60 0.30 0.29 0.05 0.419 0.043 0.055 0.394 0.016 inches 0.1 0.012 0.096 0.004 0.089 0.043 0.039 0.01 0.01 Z (1) 0.9 0.4 0.035 0.004 0.016 θ 8o o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT137-1 075E05 MS-013 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 10. Package outline SOT137-1 (SO24) 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 11 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm D SOT340-1 E A X c HE y v M A Z 24 13 Q A2 A (A 3) A1 pin 1 index θ Lp L 1 12 bp e detail X w M 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 8.4 8.0 5.4 5.2 0.65 7.9 7.6 1.25 1.03 0.63 0.9 0.7 0.2 0.13 0.1 0.8 0.4 8o o 0 Note 1. Plastic or metal protrusions of 0.2 mm maximum per side are not included. OUTLINE VERSION SOT340-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-150 Fig 11. Package outline SOT340-1 (SSOP24) 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 12 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm D SOT355-1 E A X c HE y v M A Z 13 24 Q A2 (A 3) A1 pin 1 index A θ Lp L 1 12 bp e detail X w M 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 7.9 7.7 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.5 0.2 8o 0o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT355-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-153 Fig 12. Package outline SOT355-1 (TSSOP24) 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 13 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 13. Abbreviations Table 9. Abbreviations Acronym Description BiCMOS Bipolar Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 14. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes 74ABT823 v.4 20111107 Product data sheet - 74ABT823 v.3 Modifications: • Legal pages updated. 74ABT823 v.3 20100323 Product data sheet - 74ABT823 v.2 74ABT823 v.2 20050207 Product specification - 74ABT823 v.1 74ABT823 v.1 19960314 Product specification - 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 14 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 15. Legal information 15.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 15.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 15.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 15 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond 15.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com 74ABT823 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 4 — 7 November 2011 © NXP B.V. 2011. All rights reserved. 16 of 17 74ABT823 NXP Semiconductors 9-bit D-type flip-flop with reset and enable; 3-state 17. Contents 1 2 3 4 5 5.1 5.2 6 6.1 7 8 9 10 11 12 13 14 15 15.1 15.2 15.3 15.4 16 17 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 4 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 5 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions. . . . . . . . 6 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 Legal information. . . . . . . . . . . . . . . . . . . . . . . 15 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 15 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contact information. . . . . . . . . . . . . . . . . . . . . 16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 7 November 2011 Document identifier: 74ABT823